diff mbox series

dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified

Message ID 20210108122804.359258-1-j.neuschaefer@gmx.net
State Superseded
Headers show
Series dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified | expand

Commit Message

J. Neuschäfer Jan. 8, 2021, 12:28 p.m. UTC
The NPCM750 Timer/Watchdoc Controller has multiple interrupt lines,
connected to multiple timers. The driver uses timer 0 for timer
interrupts, so the interrupt line corresponding to timer 0 should be
specified in DT.

I removed the mention of "flags for falling edge", because the timer
controller uses high-level interrupts rather than falling-edge
interrupts, and whether flags should be specified is up the interrupt
controller's DT binding.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt        | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--
2.29.2

Comments

J. Neuschäfer Jan. 8, 2021, 12:41 p.m. UTC | #1
On Fri, Jan 08, 2021 at 01:28:03PM +0100, Jonathan Neuschäfer wrote:
> The NPCM750 Timer/Watchdoc Controller has multiple interrupt lines,
                    ^^^^^^^^

oops, that's a typo.

> connected to multiple timers. The driver uses timer 0 for timer
> interrupts, so the interrupt line corresponding to timer 0 should be
> specified in DT.
> 
> I removed the mention of "flags for falling edge", because the timer
> controller uses high-level interrupts rather than falling-edge
> interrupts, and whether flags should be specified is up the interrupt
> controller's DT binding.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---
>  .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt        | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> index ea22dfe485bee..97258f1a1505b 100644
> --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> @@ -6,8 +6,7 @@ timer counters.
>  Required properties:
>  - compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750.
>  - reg             : Offset and length of the register set for the device.
> -- interrupts      : Contain the timer interrupt with flags for
> -                    falling edge.
> +- interrupts      : Contain the timer interrupt of timer 0.
>  - clocks          : phandle of timer reference clock (usually a 25 MHz clock).
> 
>  Example:
> --
> 2.29.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
index ea22dfe485bee..97258f1a1505b 100644
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
@@ -6,8 +6,7 @@  timer counters.
 Required properties:
 - compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750.
 - reg             : Offset and length of the register set for the device.
-- interrupts      : Contain the timer interrupt with flags for
-                    falling edge.
+- interrupts      : Contain the timer interrupt of timer 0.
 - clocks          : phandle of timer reference clock (usually a 25 MHz clock).

 Example: