| Message ID | 20210106083026.40444-3-song.bao.hua@hisilicon.com |
|---|---|
| State | New |
| Headers | show |
| Series | [RFC,v3,1/2] topology: Represent clusters of CPUs within a die. | expand |
On Wed, 6 Jan 2021 at 09:35, Barry Song <song.bao.hua@hisilicon.com> wrote: > > ARM64 server chip Kunpeng 920 has 6 clusters in each NUMA node, and each > cluster has 4 cpus. All clusters share L3 cache data, but each cluster > has local L3 tag. On the other hand, each clusters will share some > internal system bus. This means cache coherence overhead inside one cluster > is much less than the overhead across clusters. > > This patch adds the sched_domain for clusters. On kunpeng 920, without > this patch, domain0 of cpu0 would be MC with cpu0~cpu23 with ; with this > patch, MC becomes domain1, a new domain0 "CLS" including cpu0-cpu3. > > This will affect load balance. For example, without this patch, while cpu0 > becomes idle, it will pull a task from cpu1-cpu15. With this patch, cpu0 > will try to pull a task from cpu1-cpu3 first. This will have much less > overhead of task migration. > > On the other hand, while doing WAKE_AFFINE, this patch will try to find > a core in the target cluster before scanning the whole llc domain. > This means it will proactively use a core which has better affinity with > target core at first. > > Though it is named "cluster", architectures or machines can define its > exact meaning of cluster as long as some cpus can share some resources > in lower level than llc. So the implementation is applicable to all > architectures. > > Different cpus might have different resource sharing like L1, L2, cache > tags, internal busses etc. > Since it is hard to know where we should start to scan, this patch adds > a SD_SHARE_CLS_RESOURCES rather than directly leveraging the existing Not sure that we need this new flag. See more about this below You should have a look at https://lkml.org/lkml/2020/12/14/560 which rework select_idle_core/cpu/smt > SD_SHARE_PKG_RESOURCES flag. Architectures or machines can decide what > is cluster and who should get SD_SHARE_CLS_RESOURCES. select_idle_cpu() > will scan from the first sched_domain with SD_SHARE_CLS_RESOURCES. > > The below is a hackbench result: > > we run the below command with different -g parameter from 1 to 10, for each > different g, we run the command 10 times and get the average time > $ numactl -N 0 hackbench -p -T -l 20000 -g $1 > > hackbench will report the time which is needed to complete a certain number > of messages transmissions between a certain number of tasks, for example: > $ numactl -N 0 hackbench -p -T -l 20000 -g 10 > Running in threaded mode with 10 groups using 40 file descriptors each > (== 400 tasks) > Each sender will pass 20000 messages of 100 bytes > Time: 8.874 > > The below is the result of hackbench w/ and w/o the patch: > g 1 2 3 4 5 6 7 8 9 10 > w/o 1.4777 2.0112 3.1919 4.2654 5.3246 6.4019 7.5939 8.7073 9.7526 10.8987 > w/ 1.4793 1.9344 2.9080 3.9267 4.8339 5.7186 6.6923 7.5088 8.3715 9.2173 > +8.9% +7.9% +9.3% +10.7% +11.8% +13.8% +14.2% +15.5% > > Tracing the kernel while g=10, it shows select_idle_cpu() has a large chance > to get cpu in the same cluster with the target while it sometimes gets cpu > outside the cluster: > target cpu > 19 -> 17 > 13 -> 15 > 23 -> 20 > 23 -> 20 > 19 -> 17 > 13 -> 15 > 16 -> 17 > 19 -> 17 > 7 -> 5 > 10 -> 11 > 23 -> 20 > *23 -> 4 > ... > > Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> > --- > -v3: > - rebased againest 5.11-rc2 > - with respect to the comments of Valentin Schneider, Peter Zijlstra, > Vincent Guittot and Mel Gorman etc. > * moved the scheduler changes from arm64 to the common place for all > architectures. > * added SD_SHARE_CLS_RESOURCES sd_flags specifying the sched_domain > where select_idle_cpu() should begin to scan from > * removed redundant select_idle_cluster() function since all code is > in select_idle_cpu() now. it also avoided scanning cluster cpus > twice in v2 code; > * redo the hackbench in one numa after the above changes > > arch/arm64/Kconfig | 7 +++++++ > include/linux/sched/sd_flags.h | 9 +++++++++ > include/linux/sched/topology.h | 7 +++++++ > include/linux/topology.h | 7 +++++++ > kernel/sched/fair.c | 27 +++++++++++++++++++++------ > kernel/sched/topology.c | 6 ++++++ > 6 files changed, 57 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > index 05e1735..546cd61 100644 > --- a/arch/arm64/Kconfig > +++ b/arch/arm64/Kconfig > @@ -973,6 +973,13 @@ config SCHED_MC > making when dealing with multi-core CPU chips at a cost of slightly > increased overhead in some places. If unsure say N here. > > +config SCHED_CLUSTER > + bool "Cluster scheduler support" > + help > + Cluster scheduler support improves the CPU scheduler's decision > + making when dealing with machines that have clusters(sharing internal > + bus or sharing LLC cache tag). If unsure say N here. > + > config SCHED_SMT > bool "SMT scheduler support" > help > diff --git a/include/linux/sched/sd_flags.h b/include/linux/sched/sd_flags.h > index 34b21e9..fc3c894 100644 > --- a/include/linux/sched/sd_flags.h > +++ b/include/linux/sched/sd_flags.h > @@ -100,6 +100,15 @@ SD_FLAG(SD_ASYM_CPUCAPACITY, SDF_SHARED_PARENT | SDF_NEEDS_GROUPS) > SD_FLAG(SD_SHARE_CPUCAPACITY, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) > > /* > + * Domain members share CPU cluster resources (i.e. llc cache tags) > + * > + * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer share > + * the cluster resouces (such as llc tags and internal bus) > + * NEEDS_GROUPS: Caches are shared between groups. > + */ > +SD_FLAG(SD_SHARE_CLS_RESOURCES, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) > + > +/* > * Domain members share CPU package resources (i.e. caches) > * > * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer share > diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h > index 8f0f778..846fcac 100644 > --- a/include/linux/sched/topology.h > +++ b/include/linux/sched/topology.h > @@ -42,6 +42,13 @@ static inline int cpu_smt_flags(void) > } > #endif > > +#ifdef CONFIG_SCHED_CLUSTER > +static inline int cpu_cluster_flags(void) > +{ > + return SD_SHARE_CLS_RESOURCES | SD_SHARE_PKG_RESOURCES; > +} > +#endif > + > #ifdef CONFIG_SCHED_MC > static inline int cpu_core_flags(void) > { > diff --git a/include/linux/topology.h b/include/linux/topology.h > index bf2cc3c..81be614 100644 > --- a/include/linux/topology.h > +++ b/include/linux/topology.h > @@ -211,6 +211,13 @@ static inline const struct cpumask *cpu_smt_mask(int cpu) > } > #endif > > +#ifdef CONFIG_SCHED_CLUSTER > +static inline const struct cpumask *cpu_cluster_mask(int cpu) > +{ > + return topology_cluster_cpumask(cpu); > +} > +#endif > + > static inline const struct cpumask *cpu_cpu_mask(int cpu) > { > return cpumask_of_node(cpu_to_node(cpu)); > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c > index 04a3ce2..c14fae6 100644 > --- a/kernel/sched/fair.c > +++ b/kernel/sched/fair.c > @@ -6145,6 +6145,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t > { > struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask); > struct sched_domain *this_sd; > + struct sched_domain *prev_ssd = NULL, *ssd; > u64 avg_cost, avg_idle; > u64 time; > int this = smp_processor_id(); > @@ -6174,15 +6175,29 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t > > time = cpu_clock(this); > > - cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr); > - > - for_each_cpu_wrap(cpu, cpus, target) { > - if (!--nr) > - return -1; > - if (available_idle_cpu(cpu) || sched_idle_cpu(cpu)) > + /* > + * we first scan those child domains who declare they are sharing > + * cluster resources such as llc tags, internal busses; then scan > + * the whole llc > + */ > + for_each_domain(target, ssd) { I don't like looping the sched domain in the fast path. Instead you should follow similar policy as for smt the rework patchset mentioned above: In the select_idle_core(), you can add a static key for cluster case and loop the cpu_cluster_mask(cpu), similarly to what is done with cpu_smt_mask but for looking for one idle cpu cpu_cluster_mask() in instead of all cpus in the case of smt > + if ((ssd->flags & SD_SHARE_CLS_RESOURCES) || (ssd == sd)) { > + cpumask_and(cpus, sched_domain_span(ssd), p->cpus_ptr); > + if (prev_ssd) > + cpumask_andnot(cpus, cpus, sched_domain_span(prev_ssd)); > + for_each_cpu_wrap(cpu, cpus, target) { > + if (!--nr) > + return -1; > + if (available_idle_cpu(cpu) || sched_idle_cpu(cpu)) > + goto done; > + } > + prev_ssd = ssd; > + } > + if (ssd == sd) > break; > } > > +done: > time = cpu_clock(this) - time; > update_avg(&this_sd->avg_scan_cost, time); > > diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c > index 5d3675c..79030c9 100644 > --- a/kernel/sched/topology.c > +++ b/kernel/sched/topology.c > @@ -1361,6 +1361,7 @@ int __read_mostly node_reclaim_distance = RECLAIM_DISTANCE; > */ > #define TOPOLOGY_SD_FLAGS \ > (SD_SHARE_CPUCAPACITY | \ > + SD_SHARE_CLS_RESOURCES | \ > SD_SHARE_PKG_RESOURCES | \ > SD_NUMA | \ > SD_ASYM_PACKING) > @@ -1480,6 +1481,11 @@ static struct sched_domain_topology_level default_topology[] = { > #ifdef CONFIG_SCHED_SMT > { cpu_smt_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, > #endif > + > +#ifdef CONFIG_SCHED_CLUSTER > + { cpu_clustergroup_mask, cpu_cluster_flags, SD_INIT_NAME(CLS) }, > +#endif > + > #ifdef CONFIG_SCHED_MC > { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, > #endif > -- > 2.7.4 >
> -----Original Message----- > From: Vincent Guittot [mailto:vincent.guittot@linaro.org] > Sent: Thursday, January 7, 2021 5:29 AM > To: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com> > Cc: Valentin Schneider <valentin.schneider@arm.com>; Catalin Marinas > <catalin.marinas@arm.com>; Will Deacon <will@kernel.org>; Rafael J. Wysocki > <rjw@rjwysocki.net>; Cc: Len Brown <lenb@kernel.org>; > gregkh@linuxfoundation.org; Jonathan Cameron <jonathan.cameron@huawei.com>; > Ingo Molnar <mingo@redhat.com>; Peter Zijlstra <peterz@infradead.org>; Juri > Lelli <juri.lelli@redhat.com>; Dietmar Eggemann <dietmar.eggemann@arm.com>; > Steven Rostedt <rostedt@goodmis.org>; Ben Segall <bsegall@google.com>; Mel > Gorman <mgorman@suse.de>; Mark Rutland <mark.rutland@arm.com>; Sudeep Holla > <sudeep.holla@arm.com>; Aubrey Li <aubrey.li@linux.intel.com>; LAK > <linux-arm-kernel@lists.infradead.org>; linux-kernel > <linux-kernel@vger.kernel.org>; ACPI Devel Maling List > <linux-acpi@vger.kernel.org>; linuxarm@openeuler.org; xuwei (O) > <xuwei5@huawei.com>; Zengtao (B) <prime.zeng@hisilicon.com>; tiantao (H) > <tiantao6@hisilicon.com> > Subject: Re: [RFC PATCH v3 2/2] scheduler: add scheduler level for clusters > > On Wed, 6 Jan 2021 at 09:35, Barry Song <song.bao.hua@hisilicon.com> wrote: > > > > ARM64 server chip Kunpeng 920 has 6 clusters in each NUMA node, and each > > cluster has 4 cpus. All clusters share L3 cache data, but each cluster > > has local L3 tag. On the other hand, each clusters will share some > > internal system bus. This means cache coherence overhead inside one cluster > > is much less than the overhead across clusters. > > > > This patch adds the sched_domain for clusters. On kunpeng 920, without > > this patch, domain0 of cpu0 would be MC with cpu0~cpu23 with ; with this > > patch, MC becomes domain1, a new domain0 "CLS" including cpu0-cpu3. > > > > This will affect load balance. For example, without this patch, while cpu0 > > becomes idle, it will pull a task from cpu1-cpu15. With this patch, cpu0 > > will try to pull a task from cpu1-cpu3 first. This will have much less > > overhead of task migration. > > > > On the other hand, while doing WAKE_AFFINE, this patch will try to find > > a core in the target cluster before scanning the whole llc domain. > > This means it will proactively use a core which has better affinity with > > target core at first. > > > > Though it is named "cluster", architectures or machines can define its > > exact meaning of cluster as long as some cpus can share some resources > > in lower level than llc. So the implementation is applicable to all > > architectures. > > > > Different cpus might have different resource sharing like L1, L2, cache > > tags, internal busses etc. > > Since it is hard to know where we should start to scan, this patch adds > > a SD_SHARE_CLS_RESOURCES rather than directly leveraging the existing > > Not sure that we need this new flag. See more about this below > > You should have a look at https://lkml.org/lkml/2020/12/14/560 which > rework select_idle_core/cpu/smt > > > SD_SHARE_PKG_RESOURCES flag. Architectures or machines can decide what > > is cluster and who should get SD_SHARE_CLS_RESOURCES. select_idle_cpu() > > will scan from the first sched_domain with SD_SHARE_CLS_RESOURCES. > > > > The below is a hackbench result: > > > > we run the below command with different -g parameter from 1 to 10, for each > > different g, we run the command 10 times and get the average time > > $ numactl -N 0 hackbench -p -T -l 20000 -g $1 > > > > hackbench will report the time which is needed to complete a certain number > > of messages transmissions between a certain number of tasks, for example: > > $ numactl -N 0 hackbench -p -T -l 20000 -g 10 > > Running in threaded mode with 10 groups using 40 file descriptors each > > (== 400 tasks) > > Each sender will pass 20000 messages of 100 bytes > > Time: 8.874 > > > > The below is the result of hackbench w/ and w/o the patch: > > g 1 2 3 4 5 6 7 8 9 10 > > w/o 1.4777 2.0112 3.1919 4.2654 5.3246 6.4019 7.5939 8.7073 9.7526 10.8987 > > w/ 1.4793 1.9344 2.9080 3.9267 4.8339 5.7186 6.6923 7.5088 8.3715 9.2173 > > +8.9% +7.9% +9.3% +10.7% +11.8% +13.8% +14.2% +15.5% > > > > Tracing the kernel while g=10, it shows select_idle_cpu() has a large chance > > to get cpu in the same cluster with the target while it sometimes gets cpu > > outside the cluster: > > target cpu > > 19 -> 17 > > 13 -> 15 > > 23 -> 20 > > 23 -> 20 > > 19 -> 17 > > 13 -> 15 > > 16 -> 17 > > 19 -> 17 > > 7 -> 5 > > 10 -> 11 > > 23 -> 20 > > *23 -> 4 > > ... > > > > Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> > > --- > > -v3: > > - rebased againest 5.11-rc2 > > - with respect to the comments of Valentin Schneider, Peter Zijlstra, > > Vincent Guittot and Mel Gorman etc. > > * moved the scheduler changes from arm64 to the common place for all > > architectures. > > * added SD_SHARE_CLS_RESOURCES sd_flags specifying the sched_domain > > where select_idle_cpu() should begin to scan from > > * removed redundant select_idle_cluster() function since all code is > > in select_idle_cpu() now. it also avoided scanning cluster cpus > > twice in v2 code; > > * redo the hackbench in one numa after the above changes > > > > arch/arm64/Kconfig | 7 +++++++ > > include/linux/sched/sd_flags.h | 9 +++++++++ > > include/linux/sched/topology.h | 7 +++++++ > > include/linux/topology.h | 7 +++++++ > > kernel/sched/fair.c | 27 +++++++++++++++++++++------ > > kernel/sched/topology.c | 6 ++++++ > > 6 files changed, 57 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > > index 05e1735..546cd61 100644 > > --- a/arch/arm64/Kconfig > > +++ b/arch/arm64/Kconfig > > @@ -973,6 +973,13 @@ config SCHED_MC > > making when dealing with multi-core CPU chips at a cost of slightly > > increased overhead in some places. If unsure say N here. > > > > +config SCHED_CLUSTER > > + bool "Cluster scheduler support" > > + help > > + Cluster scheduler support improves the CPU scheduler's decision > > + making when dealing with machines that have clusters(sharing internal > > + bus or sharing LLC cache tag). If unsure say N here. > > + > > config SCHED_SMT > > bool "SMT scheduler support" > > help > > diff --git a/include/linux/sched/sd_flags.h > b/include/linux/sched/sd_flags.h > > index 34b21e9..fc3c894 100644 > > --- a/include/linux/sched/sd_flags.h > > +++ b/include/linux/sched/sd_flags.h > > @@ -100,6 +100,15 @@ SD_FLAG(SD_ASYM_CPUCAPACITY, SDF_SHARED_PARENT | > SDF_NEEDS_GROUPS) > > SD_FLAG(SD_SHARE_CPUCAPACITY, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) > > > > /* > > + * Domain members share CPU cluster resources (i.e. llc cache tags) > > + * > > + * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer > share > > + * the cluster resouces (such as llc tags and internal bus) > > + * NEEDS_GROUPS: Caches are shared between groups. > > + */ > > +SD_FLAG(SD_SHARE_CLS_RESOURCES, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) > > + > > +/* > > * Domain members share CPU package resources (i.e. caches) > > * > > * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer > share > > diff --git a/include/linux/sched/topology.h > b/include/linux/sched/topology.h > > index 8f0f778..846fcac 100644 > > --- a/include/linux/sched/topology.h > > +++ b/include/linux/sched/topology.h > > @@ -42,6 +42,13 @@ static inline int cpu_smt_flags(void) > > } > > #endif > > > > +#ifdef CONFIG_SCHED_CLUSTER > > +static inline int cpu_cluster_flags(void) > > +{ > > + return SD_SHARE_CLS_RESOURCES | SD_SHARE_PKG_RESOURCES; > > +} > > +#endif > > + > > #ifdef CONFIG_SCHED_MC > > static inline int cpu_core_flags(void) > > { > > diff --git a/include/linux/topology.h b/include/linux/topology.h > > index bf2cc3c..81be614 100644 > > --- a/include/linux/topology.h > > +++ b/include/linux/topology.h > > @@ -211,6 +211,13 @@ static inline const struct cpumask *cpu_smt_mask(int > cpu) > > } > > #endif > > > > +#ifdef CONFIG_SCHED_CLUSTER > > +static inline const struct cpumask *cpu_cluster_mask(int cpu) > > +{ > > + return topology_cluster_cpumask(cpu); > > +} > > +#endif > > + > > static inline const struct cpumask *cpu_cpu_mask(int cpu) > > { > > return cpumask_of_node(cpu_to_node(cpu)); > > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c > > index 04a3ce2..c14fae6 100644 > > --- a/kernel/sched/fair.c > > +++ b/kernel/sched/fair.c > > @@ -6145,6 +6145,7 @@ static int select_idle_cpu(struct task_struct *p, struct > sched_domain *sd, int t > > { > > struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask); > > struct sched_domain *this_sd; > > + struct sched_domain *prev_ssd = NULL, *ssd; > > u64 avg_cost, avg_idle; > > u64 time; > > int this = smp_processor_id(); > > @@ -6174,15 +6175,29 @@ static int select_idle_cpu(struct task_struct *p, > struct sched_domain *sd, int t > > > > time = cpu_clock(this); > > > > - cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr); > > - > > - for_each_cpu_wrap(cpu, cpus, target) { > > - if (!--nr) > > - return -1; > > - if (available_idle_cpu(cpu) || sched_idle_cpu(cpu)) > > + /* > > + * we first scan those child domains who declare they are sharing > > + * cluster resources such as llc tags, internal busses; then scan > > + * the whole llc > > + */ > > + for_each_domain(target, ssd) { > > I don't like looping the sched domain in the fast path. Instead you > should follow similar policy as for smt the rework patchset mentioned > above: > In the select_idle_core(), you can add a static key for cluster case > and loop the cpu_cluster_mask(cpu), similarly to what is done with > cpu_smt_mask but for looking for one idle cpu cpu_cluster_mask() in > instead of all cpus in the case of smt Hi Vincent, Thanks! Probably I got the idea to iterate sched_domains from Valentin's comment: https://lore.kernel.org/lkml/jhj1rg9v7gr.mognet@arm.com/ just in case hardware has a hierarchy of clusters, it might want to scan smaller cluster, then bigger cluster: +-------------------+ | | | | | bigger cluster | | | ++-----------------++ | | | | | | +-----------+------+ +---+---------------+ | | | | | small cluster | | small cluster | | | | | | | | | +------------------+ +-------------------+ But you are right. Anyway, the current code supports one layer of cluster only. This makes neither SD_SHARE_CLS_RESOURCES nor looping sched_domains useful. > > > + if ((ssd->flags & SD_SHARE_CLS_RESOURCES) || (ssd == sd)) { > > + cpumask_and(cpus, sched_domain_span(ssd), p->cpus_ptr); > > + if (prev_ssd) > > + cpumask_andnot(cpus, cpus, > sched_domain_span(prev_ssd)); > > + for_each_cpu_wrap(cpu, cpus, target) { > > + if (!--nr) > > + return -1; > > + if (available_idle_cpu(cpu) || > sched_idle_cpu(cpu)) > > + goto done; > > + } > > + prev_ssd = ssd; > > + } > > + if (ssd == sd) > > break; > > } > > > > +done: > > time = cpu_clock(this) - time; > > update_avg(&this_sd->avg_scan_cost, time); > > > > diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c > > index 5d3675c..79030c9 100644 > > --- a/kernel/sched/topology.c > > +++ b/kernel/sched/topology.c > > @@ -1361,6 +1361,7 @@ int __read_mostly node_reclaim_distance = > RECLAIM_DISTANCE; > > */ > > #define TOPOLOGY_SD_FLAGS \ > > (SD_SHARE_CPUCAPACITY | \ > > + SD_SHARE_CLS_RESOURCES | \ > > SD_SHARE_PKG_RESOURCES | \ > > SD_NUMA | \ > > SD_ASYM_PACKING) > > @@ -1480,6 +1481,11 @@ static struct sched_domain_topology_level > default_topology[] = { > > #ifdef CONFIG_SCHED_SMT > > { cpu_smt_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, > > #endif > > + > > +#ifdef CONFIG_SCHED_CLUSTER > > + { cpu_clustergroup_mask, cpu_cluster_flags, SD_INIT_NAME(CLS) }, > > +#endif > > + > > #ifdef CONFIG_SCHED_MC > > { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, > > #endif > > -- > > 2.7.4 > > Thanks Barry
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 05e1735..546cd61 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -973,6 +973,13 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_CLUSTER + bool "Cluster scheduler support" + help + Cluster scheduler support improves the CPU scheduler's decision + making when dealing with machines that have clusters(sharing internal + bus or sharing LLC cache tag). If unsure say N here. + config SCHED_SMT bool "SMT scheduler support" help diff --git a/include/linux/sched/sd_flags.h b/include/linux/sched/sd_flags.h index 34b21e9..fc3c894 100644 --- a/include/linux/sched/sd_flags.h +++ b/include/linux/sched/sd_flags.h @@ -100,6 +100,15 @@ SD_FLAG(SD_ASYM_CPUCAPACITY, SDF_SHARED_PARENT | SDF_NEEDS_GROUPS) SD_FLAG(SD_SHARE_CPUCAPACITY, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) /* + * Domain members share CPU cluster resources (i.e. llc cache tags) + * + * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer share + * the cluster resouces (such as llc tags and internal bus) + * NEEDS_GROUPS: Caches are shared between groups. + */ +SD_FLAG(SD_SHARE_CLS_RESOURCES, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS) + +/* * Domain members share CPU package resources (i.e. caches) * * SHARED_CHILD: Set from the base domain up until spanned CPUs no longer share diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h index 8f0f778..846fcac 100644 --- a/include/linux/sched/topology.h +++ b/include/linux/sched/topology.h @@ -42,6 +42,13 @@ static inline int cpu_smt_flags(void) } #endif +#ifdef CONFIG_SCHED_CLUSTER +static inline int cpu_cluster_flags(void) +{ + return SD_SHARE_CLS_RESOURCES | SD_SHARE_PKG_RESOURCES; +} +#endif + #ifdef CONFIG_SCHED_MC static inline int cpu_core_flags(void) { diff --git a/include/linux/topology.h b/include/linux/topology.h index bf2cc3c..81be614 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -211,6 +211,13 @@ static inline const struct cpumask *cpu_smt_mask(int cpu) } #endif +#ifdef CONFIG_SCHED_CLUSTER +static inline const struct cpumask *cpu_cluster_mask(int cpu) +{ + return topology_cluster_cpumask(cpu); +} +#endif + static inline const struct cpumask *cpu_cpu_mask(int cpu) { return cpumask_of_node(cpu_to_node(cpu)); diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 04a3ce2..c14fae6 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6145,6 +6145,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t { struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask); struct sched_domain *this_sd; + struct sched_domain *prev_ssd = NULL, *ssd; u64 avg_cost, avg_idle; u64 time; int this = smp_processor_id(); @@ -6174,15 +6175,29 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t time = cpu_clock(this); - cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr); - - for_each_cpu_wrap(cpu, cpus, target) { - if (!--nr) - return -1; - if (available_idle_cpu(cpu) || sched_idle_cpu(cpu)) + /* + * we first scan those child domains who declare they are sharing + * cluster resources such as llc tags, internal busses; then scan + * the whole llc + */ + for_each_domain(target, ssd) { + if ((ssd->flags & SD_SHARE_CLS_RESOURCES) || (ssd == sd)) { + cpumask_and(cpus, sched_domain_span(ssd), p->cpus_ptr); + if (prev_ssd) + cpumask_andnot(cpus, cpus, sched_domain_span(prev_ssd)); + for_each_cpu_wrap(cpu, cpus, target) { + if (!--nr) + return -1; + if (available_idle_cpu(cpu) || sched_idle_cpu(cpu)) + goto done; + } + prev_ssd = ssd; + } + if (ssd == sd) break; } +done: time = cpu_clock(this) - time; update_avg(&this_sd->avg_scan_cost, time); diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 5d3675c..79030c9 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -1361,6 +1361,7 @@ int __read_mostly node_reclaim_distance = RECLAIM_DISTANCE; */ #define TOPOLOGY_SD_FLAGS \ (SD_SHARE_CPUCAPACITY | \ + SD_SHARE_CLS_RESOURCES | \ SD_SHARE_PKG_RESOURCES | \ SD_NUMA | \ SD_ASYM_PACKING) @@ -1480,6 +1481,11 @@ static struct sched_domain_topology_level default_topology[] = { #ifdef CONFIG_SCHED_SMT { cpu_smt_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, #endif + +#ifdef CONFIG_SCHED_CLUSTER + { cpu_clustergroup_mask, cpu_cluster_flags, SD_INIT_NAME(CLS) }, +#endif + #ifdef CONFIG_SCHED_MC { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, #endif
ARM64 server chip Kunpeng 920 has 6 clusters in each NUMA node, and each cluster has 4 cpus. All clusters share L3 cache data, but each cluster has local L3 tag. On the other hand, each clusters will share some internal system bus. This means cache coherence overhead inside one cluster is much less than the overhead across clusters. This patch adds the sched_domain for clusters. On kunpeng 920, without this patch, domain0 of cpu0 would be MC with cpu0~cpu23 with ; with this patch, MC becomes domain1, a new domain0 "CLS" including cpu0-cpu3. This will affect load balance. For example, without this patch, while cpu0 becomes idle, it will pull a task from cpu1-cpu15. With this patch, cpu0 will try to pull a task from cpu1-cpu3 first. This will have much less overhead of task migration. On the other hand, while doing WAKE_AFFINE, this patch will try to find a core in the target cluster before scanning the whole llc domain. This means it will proactively use a core which has better affinity with target core at first. Though it is named "cluster", architectures or machines can define its exact meaning of cluster as long as some cpus can share some resources in lower level than llc. So the implementation is applicable to all architectures. Different cpus might have different resource sharing like L1, L2, cache tags, internal busses etc. Since it is hard to know where we should start to scan, this patch adds a SD_SHARE_CLS_RESOURCES rather than directly leveraging the existing SD_SHARE_PKG_RESOURCES flag. Architectures or machines can decide what is cluster and who should get SD_SHARE_CLS_RESOURCES. select_idle_cpu() will scan from the first sched_domain with SD_SHARE_CLS_RESOURCES. The below is a hackbench result: we run the below command with different -g parameter from 1 to 10, for each different g, we run the command 10 times and get the average time $ numactl -N 0 hackbench -p -T -l 20000 -g $1 hackbench will report the time which is needed to complete a certain number of messages transmissions between a certain number of tasks, for example: $ numactl -N 0 hackbench -p -T -l 20000 -g 10 Running in threaded mode with 10 groups using 40 file descriptors each (== 400 tasks) Each sender will pass 20000 messages of 100 bytes Time: 8.874 The below is the result of hackbench w/ and w/o the patch: g 1 2 3 4 5 6 7 8 9 10 w/o 1.4777 2.0112 3.1919 4.2654 5.3246 6.4019 7.5939 8.7073 9.7526 10.8987 w/ 1.4793 1.9344 2.9080 3.9267 4.8339 5.7186 6.6923 7.5088 8.3715 9.2173 +8.9% +7.9% +9.3% +10.7% +11.8% +13.8% +14.2% +15.5% Tracing the kernel while g=10, it shows select_idle_cpu() has a large chance to get cpu in the same cluster with the target while it sometimes gets cpu outside the cluster: target cpu 19 -> 17 13 -> 15 23 -> 20 23 -> 20 19 -> 17 13 -> 15 16 -> 17 19 -> 17 7 -> 5 10 -> 11 23 -> 20 *23 -> 4 ... Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> --- -v3: - rebased againest 5.11-rc2 - with respect to the comments of Valentin Schneider, Peter Zijlstra, Vincent Guittot and Mel Gorman etc. * moved the scheduler changes from arm64 to the common place for all architectures. * added SD_SHARE_CLS_RESOURCES sd_flags specifying the sched_domain where select_idle_cpu() should begin to scan from * removed redundant select_idle_cluster() function since all code is in select_idle_cpu() now. it also avoided scanning cluster cpus twice in v2 code; * redo the hackbench in one numa after the above changes arch/arm64/Kconfig | 7 +++++++ include/linux/sched/sd_flags.h | 9 +++++++++ include/linux/sched/topology.h | 7 +++++++ include/linux/topology.h | 7 +++++++ kernel/sched/fair.c | 27 +++++++++++++++++++++------ kernel/sched/topology.c | 6 ++++++ 6 files changed, 57 insertions(+), 6 deletions(-)