mbox series

[v10,0/7] soc: mediatek: SVS: introduce MTK SVS engine

Message ID 20201227105449.11452-1-roger.lu@mediatek.com
Headers show
Series soc: mediatek: SVS: introduce MTK SVS engine | expand

Message

Roger Lu Dec. 27, 2020, 10:54 a.m. UTC
1. SVS driver uses OPP adjust event in [1] to update OPP table voltage part.
2. SVS driver gets thermal/GPU device by node [2][3] and do device_link_add()
to make sure probe/suspend callback priority.
3. SVS driver gets CPU device by get_cpu_device() and do device_link_add()
to make sure probe/suspend callback priority.
3. SVS dts refers to reset controller [4] to help reset SVS HW.

#mt8183 SVS related patches
[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20201013102358.22588-2-michael.kao@mediatek.com/
[3] https://patchwork.kernel.org/project/linux-mediatek/patch/20200306041345.259332-3-drinkcat@chromium.org/

#mt8192 SVS related patches
[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20201223074944.2061-1-michael.kao@mediatek.com/
[3] https://lore.kernel.org/patchwork/patch/1356662/
[4] https://patchwork.kernel.org/project/linux-mediatek/patch/20200817030324.5690-5-crystal.guo@mediatek.com/

changes since v9:
- Since MTK SVS is SoC specific driver that doesn't share any code,
move it into Soc specific directory like these.
- Remove unnecessary SVS header file.
- Add mt8192 SVS driver.
- Change linux license to GPL-2.0-only.
- Squash "struct mtk_svs" members into "struct svs_platform"
and remove "struct mtk_svs".

Roger Lu (7):
  [v10,1/7]: dt-bindings: soc: mediatek: add mtk svs dt-bindings
  [v10,2/7]: arm64: dts: mt8183: add svs device information
  [v10,3/7]: soc: mediatek: SVS: introduce MTK SVS engine
  [v10,4/7]: soc: mediatek: SVS: add debug commands
  [v10,5/7]: dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
  [v10,6/7]: arm64: dts: mt8192: add svs device information
  [v10,7/7]: soc: mediatek: SVS: add mt8192 SVS GPU driver

 .../bindings/soc/mediatek/mtk-svs.yaml        |  101 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   20 +
 arch/arm64/boot/dts/mediatek/mt8192.dtsi      |   34 +
 drivers/soc/mediatek/Kconfig                  |   10 +
 drivers/soc/mediatek/Makefile                 |    1 +
 drivers/soc/mediatek/mtk-svs.c                | 2554 +++++++++++++++++
 6 files changed, 2720 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
 create mode 100644 drivers/soc/mediatek/mtk-svs.c

Comments

Rob Herring (Arm) Dec. 27, 2020, 4:56 p.m. UTC | #1
On Sun, 27 Dec 2020 18:54:43 +0800, Roger Lu wrote:
> Document the binding for enabling mtk svs on MediaTek SoC.
> 
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
>  .../bindings/soc/mediatek/mtk-svs.yaml        | 75 +++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.example.dt.yaml: example-0: svs@1100b000:reg:0: [0, 285257728, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1420728

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.