| Message ID | 20201221234659.824881-1-robh@kernel.org |
|---|---|
| State | Accepted |
| Commit | 9bfaf9c729a924c048eaf2032ce932b3c724dc27 |
| Headers | show |
| Series | dt-bindings: Drop unnecessary *-supply schemas properties | expand |
Hi Rob On Mon, Dec 21, 2020 at 04:46:59PM -0700, Rob Herring wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. > > A meta-schema check for this is pending once these existing cases are > fixed. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-iio@vger.kernel.org > Cc: linux-input@vger.kernel.org > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> For the Documentation/devicetree/bindings/display/* parts: Acked-by: Sam Ravnborg <sam@ravnborg.org> Sam _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Rob, Thank you for the patch. On Mon, Dec 21, 2020 at 04:46:59PM -0700, Rob Herring wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. > > A meta-schema check for this is pending once these existing cases are > fixed. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-iio@vger.kernel.org > Cc: linux-input@vger.kernel.org > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/display/bridge/anx6345.yaml | 2 -- > .../devicetree/bindings/display/bridge/ite,it6505.yaml | 2 -- > .../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +-- > Documentation/devicetree/bindings/display/bridge/ps8640.yaml | 2 -- > .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 - > .../bindings/display/bridge/thine,thc63lvd1024.yaml | 1 - > .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml | 2 -- > Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 4 +--- > .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +-- > .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 3 +-- > .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 3 +-- > .../devicetree/bindings/media/i2c/maxim,max9286.yaml | 1 - > Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml | 3 --- > Documentation/devicetree/bindings/mfd/st,stmfx.yaml | 3 +-- > .../devicetree/bindings/regulator/anatop-regulator.yaml | 1 - > 17 files changed, 6 insertions(+), 34 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > index 8c0e4f285fbc..fccd63521a8c 100644 > --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > @@ -26,11 +26,9 @@ properties: > description: GPIO connected to active low reset > > dvdd12-supply: > - maxItems: 1 > description: Regulator for 1.2V digital core power. > > dvdd25-supply: > - maxItems: 1 > description: Regulator for 2.5V digital core power. > > ports: > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index efbb3d0117dc..02cfc0a3b550 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -35,11 +35,9 @@ properties: > maxItems: 1 > > ovdd-supply: > - maxItems: 1 > description: I/O voltage > > pwr18-supply: > - maxItems: 1 > description: core voltage > > interrupts: > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > index e5e3c72630cf..66a14d60ce1d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -79,8 +79,7 @@ properties: > The GPIO used to control the power down line of this device. > maxItems: 1 > > - power-supply: > - maxItems: 1 > + power-supply: true > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > index 7e27cfcf770d..763c7909473e 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > @@ -35,11 +35,9 @@ properties: > description: GPIO connected to active low reset. > > vdd12-supply: > - maxItems: 1 > description: Regulator for 1.2V digital core power. > > vdd33-supply: > - maxItems: 1 > description: Regulator for 3.3V digital core power. > > ports: > diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > index 3ddb35fcf0a2..64e8a1c24b40 100644 > --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > @@ -60,7 +60,6 @@ properties: > description: GPIO controlling bridge enable > > vdd-supply: > - maxItems: 1 > description: Power supply for the bridge > > required: > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > index 469ac4a34273..3d5ce08a5792 100644 > --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > @@ -74,7 +74,6 @@ properties: > description: Power down GPIO signal, pin name "/PDWN", active low. > > vcc-supply: > - maxItems: 1 > description: > Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and > digital circuitry. > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > index fd3113aa9ccd..b5959cc78b8d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -28,11 +28,9 @@ properties: > description: i2c address of the bridge, 0x0f > > vdd-supply: > - maxItems: 1 > description: 1.2V LVDS Power Supply > > vddio-supply: > - maxItems: 1 > description: 1.8V IO Power Supply > > stby-gpios: > diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > index 6a991e9f78e2..f04084fae5e8 100644 > --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > @@ -16,9 +16,7 @@ properties: > enum: > - lltc,ltc2496 > > - vref-supply: > - description: phandle to an external regulator providing the reference voltage > - $ref: /schemas/types.yaml#/definitions/phandle > + vref-supply: true I'd keep part of the description as it's not just the device's main power supply (at least if we can trust the current description). vref-supply: description: Power supply for the reference voltage Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > reg: > description: spi chipselect number according to the usual spi bindings > diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > index 7037f82ec753..88384b69f917 100644 > --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > @@ -22,8 +22,7 @@ properties: > - ti,hdc2010 > - ti,hdc2080 > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > index 378a85c09d34..878464f128dc 100644 > --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > @@ -31,8 +31,7 @@ properties: > interrupts: > maxItems: 1 > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > linux,keycodes: > minItems: 1 > diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > index 4ce109476a0e..bfc3a8b5e118 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > @@ -55,8 +55,7 @@ properties: > > wakeup-source: true > > - vcc-supply: > - maxItems: 1 > + vcc-supply: true > > gain: > description: Allows setting the sensitivity in the range from 0 to 31. > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > index 9ea827092fdd..68ee8c7d9e79 100644 > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > @@ -40,7 +40,6 @@ properties: > > poc-supply: > description: Regulator providing Power over Coax to the cameras > - maxItems: 1 > > enable-gpios: > description: GPIO connected to the \#PWDN pin with inverted polarity > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > index 0df0334d2d0d..bb3528315f20 100644 > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > @@ -39,15 +39,12 @@ properties: > > vana-supply: > description: Analogue voltage supply (VANA), sensor dependent. > - maxItems: 1 > > vcore-supply: > description: Core voltage supply (VCore), sensor dependent. > - maxItems: 1 > > vio-supply: > description: I/O voltage supply (VIO), sensor dependent. > - maxItems: 1 > > clocks: > description: External clock to the sensor. > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > index 1a3590dd0e98..eb12526a462f 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > @@ -37,15 +37,12 @@ properties: > > vdddo-supply: > description: Chip digital IO regulator (1.8V). > - maxItems: 1 > > vdda-supply: > description: Chip analog regulator (2.7V). > - maxItems: 1 > > vddd-supply: > description: Chip digital core regulator (1.12V). > - maxItems: 1 > > flash-leds: > description: See ../video-interfaces.txt > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > index f697e1a20beb..a66acb20d59b 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > @@ -33,15 +33,12 @@ properties: > > vana-supply: > description: Sensor 2.8 V analog supply. > - maxItems: 1 > > vdig-supply: > description: Sensor 1.8 V digital core supply. > - maxItems: 1 > > vddl-supply: > description: Sensor digital IO 1.2 V supply. > - maxItems: 1 > > port: > type: object > diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > index 888ab4b5df45..19e9afb385ac 100644 > --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > @@ -26,8 +26,7 @@ properties: > > drive-open-drain: true > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > pinctrl: > type: object > diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > index e7b3abe30363..0a66338c7e5a 100644 > --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > @@ -59,7 +59,6 @@ properties: > description: u32 value representing regulator enable bit offset. > > vin-supply: > - $ref: '/schemas/types.yaml#/definitions/phandle' > description: input supply phandle. > > required: -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Rob, On Mon, Dec 21, 2020 at 04:46:59PM -0700, Rob Herring wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. > > A meta-schema check for this is pending once these existing cases are > fixed. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-iio@vger.kernel.org > Cc: linux-input@vger.kernel.org > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> On media bits: Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> -- Sakari Ailus _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Mon, 21 Dec 2020, Rob Herring wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. > > A meta-schema check for this is pending once these existing cases are > fixed. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-iio@vger.kernel.org > Cc: linux-input@vger.kernel.org > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/display/bridge/anx6345.yaml | 2 -- > .../devicetree/bindings/display/bridge/ite,it6505.yaml | 2 -- > .../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +-- > Documentation/devicetree/bindings/display/bridge/ps8640.yaml | 2 -- > .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 - > .../bindings/display/bridge/thine,thc63lvd1024.yaml | 1 - > .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml | 2 -- > Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 4 +--- > .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +-- > .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 3 +-- > .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 3 +-- > .../devicetree/bindings/media/i2c/maxim,max9286.yaml | 1 - > Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml | 3 --- > Documentation/devicetree/bindings/mfd/st,stmfx.yaml | 3 +-- Acked-by: Lee Jones <lee.jones@linaro.org> > .../devicetree/bindings/regulator/anatop-regulator.yaml | 1 - > 17 files changed, 6 insertions(+), 34 deletions(-)
On Mon, Dec 21, 2020 at 04:46:59PM -0700, Rob Herring wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. Acked-by: Mark Brown <broonie@kernel.org> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Mon, 21 Dec 2020 16:46:59 -0700 Rob Herring <robh@kernel.org> wrote: > *-supply properties are always a single phandle, so binding schemas > don't need a type $ref nor 'maxItems'. > > A meta-schema check for this is pending once these existing cases are > fixed. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-iio@vger.kernel.org > Cc: linux-input@vger.kernel.org > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio > --- > Documentation/devicetree/bindings/display/bridge/anx6345.yaml | 2 -- > .../devicetree/bindings/display/bridge/ite,it6505.yaml | 2 -- > .../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +-- > Documentation/devicetree/bindings/display/bridge/ps8640.yaml | 2 -- > .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 - > .../bindings/display/bridge/thine,thc63lvd1024.yaml | 1 - > .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml | 2 -- > Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 4 +--- > .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +-- > .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 3 +-- > .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 3 +-- > .../devicetree/bindings/media/i2c/maxim,max9286.yaml | 1 - > Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml | 3 --- > Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml | 3 --- > Documentation/devicetree/bindings/mfd/st,stmfx.yaml | 3 +-- > .../devicetree/bindings/regulator/anatop-regulator.yaml | 1 - > 17 files changed, 6 insertions(+), 34 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > index 8c0e4f285fbc..fccd63521a8c 100644 > --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > @@ -26,11 +26,9 @@ properties: > description: GPIO connected to active low reset > > dvdd12-supply: > - maxItems: 1 > description: Regulator for 1.2V digital core power. > > dvdd25-supply: > - maxItems: 1 > description: Regulator for 2.5V digital core power. > > ports: > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index efbb3d0117dc..02cfc0a3b550 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -35,11 +35,9 @@ properties: > maxItems: 1 > > ovdd-supply: > - maxItems: 1 > description: I/O voltage > > pwr18-supply: > - maxItems: 1 > description: core voltage > > interrupts: > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > index e5e3c72630cf..66a14d60ce1d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -79,8 +79,7 @@ properties: > The GPIO used to control the power down line of this device. > maxItems: 1 > > - power-supply: > - maxItems: 1 > + power-supply: true > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > index 7e27cfcf770d..763c7909473e 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > @@ -35,11 +35,9 @@ properties: > description: GPIO connected to active low reset. > > vdd12-supply: > - maxItems: 1 > description: Regulator for 1.2V digital core power. > > vdd33-supply: > - maxItems: 1 > description: Regulator for 3.3V digital core power. > > ports: > diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > index 3ddb35fcf0a2..64e8a1c24b40 100644 > --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > @@ -60,7 +60,6 @@ properties: > description: GPIO controlling bridge enable > > vdd-supply: > - maxItems: 1 > description: Power supply for the bridge > > required: > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > index 469ac4a34273..3d5ce08a5792 100644 > --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > @@ -74,7 +74,6 @@ properties: > description: Power down GPIO signal, pin name "/PDWN", active low. > > vcc-supply: > - maxItems: 1 > description: > Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and > digital circuitry. > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > index fd3113aa9ccd..b5959cc78b8d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -28,11 +28,9 @@ properties: > description: i2c address of the bridge, 0x0f > > vdd-supply: > - maxItems: 1 > description: 1.2V LVDS Power Supply > > vddio-supply: > - maxItems: 1 > description: 1.8V IO Power Supply > > stby-gpios: > diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > index 6a991e9f78e2..f04084fae5e8 100644 > --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > @@ -16,9 +16,7 @@ properties: > enum: > - lltc,ltc2496 > > - vref-supply: > - description: phandle to an external regulator providing the reference voltage > - $ref: /schemas/types.yaml#/definitions/phandle > + vref-supply: true > > reg: > description: spi chipselect number according to the usual spi bindings > diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > index 7037f82ec753..88384b69f917 100644 > --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > @@ -22,8 +22,7 @@ properties: > - ti,hdc2010 > - ti,hdc2080 > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > index 378a85c09d34..878464f128dc 100644 > --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml > @@ -31,8 +31,7 @@ properties: > interrupts: > maxItems: 1 > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > linux,keycodes: > minItems: 1 > diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > index 4ce109476a0e..bfc3a8b5e118 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > @@ -55,8 +55,7 @@ properties: > > wakeup-source: true > > - vcc-supply: > - maxItems: 1 > + vcc-supply: true > > gain: > description: Allows setting the sensitivity in the range from 0 to 31. > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > index 9ea827092fdd..68ee8c7d9e79 100644 > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > @@ -40,7 +40,6 @@ properties: > > poc-supply: > description: Regulator providing Power over Coax to the cameras > - maxItems: 1 > > enable-gpios: > description: GPIO connected to the \#PWDN pin with inverted polarity > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > index 0df0334d2d0d..bb3528315f20 100644 > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml > @@ -39,15 +39,12 @@ properties: > > vana-supply: > description: Analogue voltage supply (VANA), sensor dependent. > - maxItems: 1 > > vcore-supply: > description: Core voltage supply (VCore), sensor dependent. > - maxItems: 1 > > vio-supply: > description: I/O voltage supply (VIO), sensor dependent. > - maxItems: 1 > > clocks: > description: External clock to the sensor. > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > index 1a3590dd0e98..eb12526a462f 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml > @@ -37,15 +37,12 @@ properties: > > vdddo-supply: > description: Chip digital IO regulator (1.8V). > - maxItems: 1 > > vdda-supply: > description: Chip analog regulator (2.7V). > - maxItems: 1 > > vddd-supply: > description: Chip digital core regulator (1.12V). > - maxItems: 1 > > flash-leds: > description: See ../video-interfaces.txt > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > index f697e1a20beb..a66acb20d59b 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > @@ -33,15 +33,12 @@ properties: > > vana-supply: > description: Sensor 2.8 V analog supply. > - maxItems: 1 > > vdig-supply: > description: Sensor 1.8 V digital core supply. > - maxItems: 1 > > vddl-supply: > description: Sensor digital IO 1.2 V supply. > - maxItems: 1 > > port: > type: object > diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > index 888ab4b5df45..19e9afb385ac 100644 > --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml > @@ -26,8 +26,7 @@ properties: > > drive-open-drain: true > > - vdd-supply: > - maxItems: 1 > + vdd-supply: true > > pinctrl: > type: object > diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > index e7b3abe30363..0a66338c7e5a 100644 > --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml > @@ -59,7 +59,6 @@ properties: > description: u32 value representing regulator enable bit offset. > > vin-supply: > - $ref: '/schemas/types.yaml#/definitions/phandle' > description: input supply phandle. > > required: _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 8c0e4f285fbc..fccd63521a8c 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -26,11 +26,9 @@ properties: description: GPIO connected to active low reset dvdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. dvdd25-supply: - maxItems: 1 description: Regulator for 2.5V digital core power. ports: diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index efbb3d0117dc..02cfc0a3b550 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -35,11 +35,9 @@ properties: maxItems: 1 ovdd-supply: - maxItems: 1 description: I/O voltage pwr18-supply: - maxItems: 1 description: core voltage interrupts: diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index e5e3c72630cf..66a14d60ce1d 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -79,8 +79,7 @@ properties: The GPIO used to control the power down line of this device. maxItems: 1 - power-supply: - maxItems: 1 + power-supply: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 7e27cfcf770d..763c7909473e 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -35,11 +35,9 @@ properties: description: GPIO connected to active low reset. vdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. vdd33-supply: - maxItems: 1 description: Regulator for 3.3V digital core power. ports: diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 3ddb35fcf0a2..64e8a1c24b40 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -60,7 +60,6 @@ properties: description: GPIO controlling bridge enable vdd-supply: - maxItems: 1 description: Power supply for the bridge required: diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml index 469ac4a34273..3d5ce08a5792 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -74,7 +74,6 @@ properties: description: Power down GPIO signal, pin name "/PDWN", active low. vcc-supply: - maxItems: 1 description: Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and digital circuitry. diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index fd3113aa9ccd..b5959cc78b8d 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -28,11 +28,9 @@ properties: description: i2c address of the bridge, 0x0f vdd-supply: - maxItems: 1 description: 1.2V LVDS Power Supply vddio-supply: - maxItems: 1 description: 1.8V IO Power Supply stby-gpios: diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 6a991e9f78e2..f04084fae5e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -16,9 +16,7 @@ properties: enum: - lltc,ltc2496 - vref-supply: - description: phandle to an external regulator providing the reference voltage - $ref: /schemas/types.yaml#/definitions/phandle + vref-supply: true reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 7037f82ec753..88384b69f917 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -22,8 +22,7 @@ properties: - ti,hdc2010 - ti,hdc2080 - vdd-supply: - maxItems: 1 + vdd-supply: true reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml index 378a85c09d34..878464f128dc 100644 --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml @@ -31,8 +31,7 @@ properties: interrupts: maxItems: 1 - vdd-supply: - maxItems: 1 + vdd-supply: true linux,keycodes: minItems: 1 diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 4ce109476a0e..bfc3a8b5e118 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -55,8 +55,7 @@ properties: wakeup-source: true - vcc-supply: - maxItems: 1 + vcc-supply: true gain: description: Allows setting the sensitivity in the range from 0 to 31. diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 9ea827092fdd..68ee8c7d9e79 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -40,7 +40,6 @@ properties: poc-supply: description: Regulator providing Power over Coax to the cameras - maxItems: 1 enable-gpios: description: GPIO connected to the \#PWDN pin with inverted polarity diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index 0df0334d2d0d..bb3528315f20 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -39,15 +39,12 @@ properties: vana-supply: description: Analogue voltage supply (VANA), sensor dependent. - maxItems: 1 vcore-supply: description: Core voltage supply (VCore), sensor dependent. - maxItems: 1 vio-supply: description: I/O voltage supply (VIO), sensor dependent. - maxItems: 1 clocks: description: External clock to the sensor. diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml index 1a3590dd0e98..eb12526a462f 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -37,15 +37,12 @@ properties: vdddo-supply: description: Chip digital IO regulator (1.8V). - maxItems: 1 vdda-supply: description: Chip analog regulator (2.7V). - maxItems: 1 vddd-supply: description: Chip digital core regulator (1.12V). - maxItems: 1 flash-leds: description: See ../video-interfaces.txt diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml index f697e1a20beb..a66acb20d59b 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -33,15 +33,12 @@ properties: vana-supply: description: Sensor 2.8 V analog supply. - maxItems: 1 vdig-supply: description: Sensor 1.8 V digital core supply. - maxItems: 1 vddl-supply: description: Sensor digital IO 1.2 V supply. - maxItems: 1 port: type: object diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml index 888ab4b5df45..19e9afb385ac 100644 --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -26,8 +26,7 @@ properties: drive-open-drain: true - vdd-supply: - maxItems: 1 + vdd-supply: true pinctrl: type: object diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml index e7b3abe30363..0a66338c7e5a 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -59,7 +59,6 @@ properties: description: u32 value representing regulator enable bit offset. vin-supply: - $ref: '/schemas/types.yaml#/definitions/phandle' description: input supply phandle. required:
*-supply properties are always a single phandle, so binding schemas don't need a type $ref nor 'maxItems'. A meta-schema check for this is pending once these existing cases are fixed. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-media@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/display/bridge/anx6345.yaml | 2 -- .../devicetree/bindings/display/bridge/ite,it6505.yaml | 2 -- .../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +-- Documentation/devicetree/bindings/display/bridge/ps8640.yaml | 2 -- .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 - .../bindings/display/bridge/thine,thc63lvd1024.yaml | 1 - .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml | 2 -- Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 4 +--- .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +-- .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 3 +-- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 3 +-- .../devicetree/bindings/media/i2c/maxim,max9286.yaml | 1 - Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 --- Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml | 3 --- Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml | 3 --- Documentation/devicetree/bindings/mfd/st,stmfx.yaml | 3 +-- .../devicetree/bindings/regulator/anatop-regulator.yaml | 1 - 17 files changed, 6 insertions(+), 34 deletions(-) -- 2.27.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel