dt-bindings: Fix JSON pointers

Message ID	20201217223429.354283-1-robh@kernel.org
State	New
Headers	show Return-Path: <netdev-owner@kernel.org> From: Rob Herring <robh@kernel.org> To: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>, Vinod Koul <vkoul@kernel.org>, Guenter Roeck <linux@roeck-us.net>, Jonathan Cameron <jic23@kernel.org>, Lars-Peter Clausen <lars@metafoo.de>, Lee Jones <lee.jones@linaro.org>, Daniel Thompson <daniel.thompson@linaro.org>, Jingoo Han <jingoohan1@gmail.com>, Pavel Machek <pavel@ucw.cz>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Andrew Lunn <andrew@lunn.ch>, Florian Fainelli <f.fainelli@gmail.com>, Sebastian Reichel <sre@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Mark Brown <broonie@kernel.org>, netdev@vger.kernel.org Subject: [PATCH] dt-bindings: Fix JSON pointers Date: Thu, 17 Dec 2020 16:34:29 -0600 Message-Id: <20201217223429.354283-1-robh@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	dt-bindings: Fix JSON pointers \| expand dt-bindings: Fix JSON pointers

diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml index ea805c1e6b20..52bce5dbb11f 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.yaml +++ b/Documentation/devicetree/bindings/arm/idle-states.yaml @@ -313,7 +313,7 @@ patternProperties: wakeup-latency-us by this duration. idle-state-name: - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string description: A string used as a descriptive name for the idle state. diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index 0503651cd214..863a287ebc7e 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -34,7 +34,7 @@ properties: description: The SRAM that needs to be claimed to access the display engine bus. - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 ranges: true diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 0bee4694578a..4ac78b44e45e 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -46,7 +46,7 @@ properties: const: 1 syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the Baikal-T1 System Controller DT node interrupts: diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index a84464b3e1f2..4286ed767a0a 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -37,7 +37,7 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - mini @@ -67,7 +67,7 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - source @@ -76,7 +76,7 @@ properties: try-power-role: description: Preferred power role. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - source @@ -86,7 +86,7 @@ properties: data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - host @@ -105,7 +105,7 @@ properties: Type-C Cable and Connector specification, when Power Delivery is not supported. allOf: - - $ref: /schemas/types.yaml#definitions/string + - $ref: /schemas/types.yaml#/definitions/string enum: - default - 1.5A diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 307b499e8968..ad06d36af208 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -38,12 +38,12 @@ properties: maxItems: 255 dma-channels: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of DMA channels supported by the controller. dma-requests: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of DMA request signals supported by the controller. diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 4cee5667b8a8..e72748496fd9 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -23,7 +23,7 @@ properties: pattern: "^dma-router(@.*)?$" dma-masters: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Array of phandles to the DMA controllers the router can direct the signal to. diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 00f19b3cac31..6a2043721b95 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -48,7 +48,7 @@ properties: ingenic,reserved-channels property. ingenic,reserved-channels: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: > Bitmask of channels to reserve for devices that need a specific channel. These channels will only be assigned when explicitely diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index ef1d6879c158..6b35089ac017 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -54,7 +54,7 @@ properties: maximum: 16 dma-masters: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Number of DMA masters supported by the controller. In case if not specified the driver will try to auto-detect this and @@ -63,7 +63,7 @@ properties: maximum: 4 chan_allocation_order: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | DMA channels allocation order specifier. Zero means ascending order (first free allocated), while one - descending (last free allocated). @@ -71,7 +71,7 @@ properties: enum: [0, 1] chan_priority: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | DMA channels priority order. Zero means ascending channels priority so the very first channel has the highest priority. While 1 means @@ -80,7 +80,7 @@ properties: enum: [0, 1] block_size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum block size supported by the DMA controller. enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095] @@ -139,7 +139,7 @@ properties: default: 256 snps,dma-protection-control: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting indicates the following features: bit 0 - privileged mode, diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 6edfa705b486..d5117c638b75 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -131,7 +131,7 @@ properties: default: 1 read-only: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Disables writes to the eeprom. @@ -141,7 +141,7 @@ properties: Total eeprom size in bytes. no-read-rollover: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the multi-address eeprom does not automatically roll over reads to the next slave address. Please consult the manual of diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 744973637678..121a601db22e 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -45,13 +45,13 @@ properties: spi-max-frequency: true pagesize: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072] description: Size of the eeprom page. size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Total eeprom size in bytes. diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index 6f3e3c01f717..b79f069a04c2 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -32,7 +32,7 @@ properties: PVT controller has 5 VM (voltage monitor) sensors. vm-map defines CPU core to VM instance mapping. A value of 0xff means that VM sensor is unused. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array maxItems: 5 clocks: diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml index c523a1beb2b7..7d49478d9668 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -29,12 +29,12 @@ properties: const: 0x70 sensirion,blocking-io: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, the driver hold the i2c bus until measurement is finished. sensirion,low-precision: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, the sensor aquire data with low precision (not recommended). The driver aquire data with high precision by default. diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index c17e5d3ee3f1..8020d739a078 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -61,7 +61,7 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 3 items: diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml index 4a9b2827cf7b..de5882cb3360 100644 --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml @@ -45,7 +45,7 @@ properties: default: 0x16 upisemi,continuous: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: | This chip has two power modes: one-shot (chip takes one measurement and then shuts itself down) and continuous (chip takes continuous diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml index ccfb163f3d34..5de0bb2180e6 100644 --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml @@ -72,7 +72,7 @@ properties: - finest semtech,startup-sensor: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] default: 0 description: @@ -81,7 +81,7 @@ properties: compensation. semtech,proxraw-strength: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 2, 4, 8] default: 2 description: @@ -89,7 +89,7 @@ properties: represent 1-1/N. semtech,avg-pos-strength: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295] default: 16 description: diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index 6966ab009fa3..060a309ff8e7 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -34,13 +34,13 @@ patternProperties: linux,code: description: Key / Axis code to emit. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 linux,input-type: description: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 @@ -56,12 +56,12 @@ patternProperties: linux,input-value = <0xffffffff>; /* -1 */ - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 debounce-interval: description: Debouncing interval time in milliseconds. If not specified defaults to 5. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 5 @@ -79,7 +79,7 @@ patternProperties: EV_ACT_ANY - both asserted and deasserted EV_ACT_ASSERTED - asserted EV_ACT_DEASSERTED - deasserted - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] linux,can-disable: @@ -118,7 +118,7 @@ then: poll-interval: description: Poll interval time in milliseconds - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 required: - poll-interval diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml index 039e08af98bb..91bb3c2307a7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -42,7 +42,7 @@ properties: Specifies the list of CPU interrupt vectors to which the GIC may not route interrupts. This property is ignored if the CPU is started in EIC mode. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 6 uniqueItems: true @@ -56,7 +56,7 @@ properties: It accepts two values: the 1st is the starting interrupt and the 2nd is the size of the reserved range. If not specified, the driver will allocate the last (2 * number of VPEs in the system). - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - minimum: 0 maximum: 254 diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index 1c4c009dedd0..c2ce215501a5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -80,7 +80,7 @@ properties: mapping is provided. ti,irqs-reserved: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC output interrupts 2 through 9) that are not connected to the Arm interrupt diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index b5af12011499..3d89668573e8 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -76,7 +76,7 @@ properties: "limit" specifies the limit for translation ti,unmapped-event-sources: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Array of phandles to DMA controllers where the unmapped events originate. diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml index bc817f77d2b1..702ba350d869 100644 --- a/Documentation/devicetree/bindings/leds/backlight/common.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -22,7 +22,7 @@ properties: The default brightness that should be applied to the LED by the operating system on start-up. The brightness should not exceed the brightness the LED can provide. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 max-brightness: description: @@ -31,6 +31,6 @@ properties: on the brightness apart from what the driver says, as it could happen that a LED can be made so bright that it gets damaged or causes damage due to restrictions in a specific system, such as mounting conditions. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index f1211e7045f1..b1f363747a62 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -27,21 +27,21 @@ properties: List of device current outputs the LED is connected to. The outputs are identified by the numbers that must be defined in the LED device binding documentation. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array function: description: LED function. Use one of the LED_FUNCTION_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_FUNCTION available, add a new one. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string color: description: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 9 @@ -49,7 +49,7 @@ properties: description: Integer to be used when more than one instance of the same function is needed, differing only with an ordinal number. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 label: description: @@ -66,7 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - on - off @@ -77,7 +77,7 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: # LED will act as a back-light, controlled by the framebuffer system @@ -109,7 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#/definitions/uint32-matrix items: minItems: 2 maxItems: 2 @@ -143,7 +143,7 @@ properties: the device tree and be referenced by a phandle and a set of phandle arguments. A length of arguments should be specified by the #trigger-source-cells property in the source node. - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array # Required properties for flash LED child nodes: flash-max-microamp: diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index 58e974793a79..f552cd143d5b 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -35,7 +35,7 @@ properties: description: I2C slave address clock-mode: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Input clock mode enum: @@ -49,7 +49,7 @@ properties: GPIO attached to the chip's enable pin pwr-sel: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | LP8501 specific property. Power selection for output channels. enum: @@ -70,14 +70,14 @@ patternProperties: $ref: common.yaml# properties: led-cur: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Current setting at each LED channel (mA x10, 0 if LED is not connected) minimum: 0 maximum: 255 max-cur: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: Maximun current at each LED channel. reg: @@ -97,7 +97,7 @@ patternProperties: - 8 # LED output D9 chan-name: - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string description: name of channel required: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index c7c9ad4e3f9f..7f2578d48e3f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -38,7 +38,7 @@ properties: const: stmmaceth syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the EMAC or GMAC clock register @@ -114,7 +114,7 @@ allOf: then: properties: allwinner,leds-active-low: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: EPHY LEDs are active low. @@ -126,7 +126,7 @@ allOf: const: allwinner,sun8i-h3-mdio-mux mdio-parent-bus: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to EMAC MDIO. diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 6b057b117aa0..1f133f4a2924 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -60,7 +60,7 @@ allOf: - const: timing-adjustment amlogic,tx-delay-ns: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The internal RGMII TX clock delay (provided by this driver) in nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns. diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8e044631bcf7..8a3494db4d8d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -54,7 +54,7 @@ patternProperties: description: Describes the label associated with this port, which will become the netdev name - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string link: description: @@ -62,13 +62,13 @@ patternProperties: port is used as the outgoing port towards the phandle ports. The full routing information must be given, not just the one hop routes to neighbouring switches - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array ethernet: description: Should be a phandle to a valid Ethernet device node. This host device is what the switch port is connected to - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle phy-handle: true diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index cc93063a8f39..0965f6515f9e 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -16,7 +16,7 @@ properties: local-mac-address: description: Specifies the MAC address that was assigned to the network device. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 @@ -27,20 +27,20 @@ properties: program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 max-frame-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). max-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Specifies maximum speed in Mbit/s supported by the device. @@ -101,7 +101,7 @@ properties: $ref: "#/properties/phy-connection-type" phy-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a PHY device. @@ -114,7 +114,7 @@ properties: deprecated: true rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s receive fifo in bytes. This is used for components that can have configurable receive fifo sizes, @@ -129,12 +129,12 @@ properties: If this property is present then the MAC applies the RX delay. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. @@ -150,7 +150,7 @@ properties: description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string default: auto enum: - auto @@ -198,17 +198,17 @@ properties: speed: description: Link speed. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [10, 100, 1000] full-duplex: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that full-duplex is used. When absent, half duplex is assumed. asym-pause: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that asym_pause should be enabled. diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 6dd72faebd89..2766fe45bb98 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -78,57 +78,57 @@ properties: Maximum PHY supported speed in Mbits / seconds. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY device does not correctly release the turn around line low at end of the control phase of the MDIO transaction. enet-phy-lane-swap: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. eee-broken-100tx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000t: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gt: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000kx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkx4: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkr: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. phy-is-integrated: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that the PHY is integrated into the same physical package as the Ethernet MAC. If needed, muxers @@ -158,7 +158,7 @@ properties: this property is missing the delay will be skipped. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml index 2159b7d1f537..7f620a71a972 100644 --- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -31,7 +31,7 @@ properties: phy-mode: true pcs-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a node representing a PCS PHY device found on the internal MDIO bus. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index e811e0fd851c..08e15fb1584f 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -70,7 +70,7 @@ patternProperties: The ID number for the device. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the MDIO device does not correctly release the turn around line low at end of the control phase of the diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index 0bbd598704e9..e6a5ff208253 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -42,7 +42,7 @@ properties: - const: trans mediatek,pericfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the PERICFG register range. This is used to control the MII mode. diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 4d8464b2676d..d0cbbcf1b0e5 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -114,7 +114,7 @@ properties: validating firwmare used by the GSI. modem-remoteproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: This defines the phandle to the remoteproc node representing the modem subsystem. This is requied so the IPA driver can diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 11a6fdb657c9..b2f6083f556a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -126,7 +126,7 @@ properties: in a different mode than the PHY in order to function. snps,axi-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: AXI BUS Mode parameters. Phandle to a node that can contain the following properties @@ -141,7 +141,7 @@ properties: * snps,rb, rebuild INCRx Burst snps,mtl-rx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple RX Queues parameters. Phandle to a node that can contain the following properties @@ -164,7 +164,7 @@ properties: * snps,priority, RX queue priority (Range 0x0 to 0xF) snps,mtl-tx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple TX Queues parameters. Phandle to a node that can contain the following properties @@ -198,7 +198,7 @@ properties: snps,reset-active-low: deprecated: true - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the PHY Reset is active low @@ -208,55 +208,55 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 snps,aal: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Use Address-Aligned Beats snps,fixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the fixed burst mode snps,mixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the mixed burst mode snps,force_thresh_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the threshold mode for both tx and rx snps,force_sf_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. snps,en-tx-lpi-clockgating: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enable gating of the MAC TX clock during TX low-power mode snps,multicast-filter-bins: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of multicast filter hash bins supported by this device instance snps,perfect-filter-entries: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of perfect filter entries supported by this device instance snps,ps-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and @@ -307,25 +307,25 @@ allOf: snps,pbl: description: Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,txpbl: description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,rxpbl: description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,no-pbl-x8: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core rev < 3.50, don\'t multiply the values by 4. @@ -351,7 +351,7 @@ allOf: then: properties: snps,tso: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enables the TSO feature otherwise it will be managed by MAC HW capability register. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index cbacc04fc9e6..8a03a24a2019 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -64,7 +64,7 @@ properties: - const: ether # for others socionext,syscon-phy-mode: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index dadeb8f811c0..07a00f53adbf 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -70,7 +70,7 @@ properties: pinctrl-names: true syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 4050a3608658..047d757e8d82 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -47,31 +47,31 @@ properties: takes precedence. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h for applicable values. The CLK_OUT pin can also be disabled by this property. When omitted, the PHY's default will be left as is. ti,rx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID. ti,tx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is @@ -101,7 +101,7 @@ properties: ti,fifo-depth: deprecated: true - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index c3235f08e326..70a1209cb13b 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -44,22 +44,22 @@ properties: to a maximum value (70 ohms). tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. ti,op-mode: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Operational mode for the PHY. If this is not set then the operational mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 227270cbf892..c47b58f3e3f6 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -119,12 +119,12 @@ properties: description: label associated with this port ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Specifies the port works in mac-only mode. ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 6af999191559..85c2f699d602 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -136,7 +136,7 @@ properties: - const: tcl2host-status-ring qcom,rproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: DT entry of q6v5-wcss remoteproc driver. Phandle to a node that can contain the following properties diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index 83d5d0aceb04..cbbf5e8b1197 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -44,13 +44,13 @@ properties: - const: refclk syscon-phy-power: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle/offset pair. Phandle to the system control module and register offset to power on/off the PHY. ctrl-module: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: (deprecated) phandle of the control module used by PHY driver to power on the PHY. Use syscon-phy-power instead. diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index fd12bafe3548..d14cb9bac849 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -83,11 +83,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. patternProperties: @@ -131,11 +131,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. patternProperties: @@ -179,11 +179,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. required: diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index ee92e6a076ac..5fcdf5801536 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -27,7 +27,7 @@ properties: of this binary blob is kept secret by CellWise. The only way to obtain it is to mail two batteries to a test facility of CellWise and receive back a test report with the binary blob. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array minItems: 64 maxItems: 64 diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml index 6494c7d08b93..1b0936a5beec 100644 --- a/Documentation/devicetree/bindings/powerpc/sleep.yaml +++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml @@ -42,6 +42,6 @@ select: true properties: sleep: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array additionalProperties: true diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index c1d4c196f005..f54cae9ff7b2 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -126,7 +126,7 @@ properties: maxItems: 1 current-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The current active speed of the UART. reg-offset: @@ -154,7 +154,7 @@ properties: Set to indicate that the port does not implement loopback test mode. fifo-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The fifo size of the UART. auto-flow-control: @@ -165,7 +165,7 @@ properties: property. tx-threshold: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml index c3c595e235a8..ddea3d41971d 100644 --- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -55,7 +55,7 @@ properties: description: TI-SCI RM subtype for GP ring range ti,sci: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle on TI-SCI compatible System controller node ti,sci-dev-id: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index be390accdd07..dd47fef9854d 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,7 +57,7 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. - $ref: /schemas/types.yaml#definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array minItems: 2 maxItems: 18 items: diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 6ad48c7681c1..f2443b651282 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -106,7 +106,7 @@ patternProperties: Must contain the phandle and index of the SAI sub-block providing the synchronization. allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array + - $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 st,iec60958: @@ -117,7 +117,7 @@ patternProperties: configured according to protocol defined in related DAI link node, such as i2s, left justified, right justified, dsp and pdm protocols. allOf: - - $ref: /schemas/types.yaml#definitions/flag + - $ref: /schemas/types.yaml#/definitions/flag "#clock-cells": description: Configure the SAI device as master clock provider.

dt-bindings: Fix JSON pointers

Commit Message

Comments

Patch