| Message ID | 20201213183759.223246-10-aford173@gmail.com |
|---|---|
| State | Accepted |
| Commit | 7f1cb1579808f97bd211b4ad16c82f2dc191c709 |
| Headers | show |
| Series | arm64: dts: renesas: Cleanup Beacon Kit and support more SoC's | expand |
On Sun, Dec 13, 2020 at 7:38 PM Adam Ford <aford173@gmail.com> wrote: > The backlight didn't really work correctly due to some updates that were > made in hardware. It should be safe to apply these, because the older > hardware was never shipped to anyone, so it shouldn't break anything. > Because the display driver refers to the display as DPI, this also > renames the backlight to use DPI for consistency. > > Signed-off-by: Adam Ford <aford173@gmail.com> Thanks, I have to trust you on this one, i.e. will queue in renesas-devel for v5.12. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index bf047a9836ed..87a0f556cd2f 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -17,12 +17,12 @@ backlight_lvds: backlight-lvds { default-brightness-level = <6>; }; - backlight_rgb: backlight-rgb { + backlight_dpi: backlight-dpi { compatible = "pwm-backlight"; power-supply = <®_lcd>; enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; - pwms = <&pwm0 0 50000>; - brightness-levels = <0 4 8 16 32 64 128 255>; + pwms = <&pwm0 0 25000>; + brightness-levels = <0 25 33 50 63 75 88 100>; default-brightness-level = <6>; }; @@ -136,7 +136,7 @@ panel_in: endpoint { rgb { /* Different LCD with compatible timings */ compatible = "rocktech,rk070er9427"; - backlight = <&backlight_rgb>; + backlight = <&backlight_dpi>; enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; power-supply = <®_lcd>; port {
The backlight didn't really work correctly due to some updates that were made in hardware. It should be safe to apply these, because the older hardware was never shipped to anyone, so it shouldn't break anything. Because the display driver refers to the display as DPI, this also renames the backlight to use DPI for consistency. Signed-off-by: Adam Ford <aford173@gmail.com> --- arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)