| Message ID | 20201216075158.16458-1-m.szyprowski@samsung.com |
|---|---|
| Headers | show |
| Series | VIM3: add support for checking 'Function' button state | expand |
On 16/12/2020 08:51, Marek Szyprowski wrote: > Hi All, > > This patchset adds all building blocks needed for checking the 'Function' > button state in the boot script on Amlogic A311D based VIM3 board. This > button is connected to the ADC lines of the SoC, so it required to enable > meson SARADC, the clocks needed for it and a simple button-adc drivers. > > Once applied, one can use following commands in the boot scripts: > -->8--- > echo Checking Func button state: \\c > if button Function > then > echo Selected alternative boot > ... > fi > --->8--- > The above script requires commit a6bfd71a96 ("cmd/button: return button > status") already present in mainline tree. > > Best regards > Marek Szyprowski > Samsung R&D Institute Poland > > > Changelog: > v3: > - removed 'button' env variable > - extended kconfig and patch descriptions > > v2: https://lists.denx.de/pipermail/u-boot/2020-December/434991.html > - removed Change-Id tags > - split defconfig changes into ADC and button related > > v1: https://lists.denx.de/pipermail/u-boot/2020-December/434875.html > - initial submission > > > Patch summary: > > Marek Szyprowski (6): > clk: meson: add minimal driver for g12a-ao clocks > adc: meson-saradc: add G12A variant > adc: meson-saradc: skip hardware init only if ADC is enabled > configs: khadas-vim3: enable ADC device support > button: add a simple ADC-based button driver > configs: khadas-vim3: enable Function button support > > configs/khadas-vim3_defconfig | 4 ++ > drivers/adc/meson-saradc.c | 9 ++- > drivers/button/Kconfig | 8 +++ > drivers/button/Makefile | 1 + > drivers/button/button-adc.c | 117 ++++++++++++++++++++++++++++++++++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/g12a-ao.c | 83 ++++++++++++++++++++++++ > 7 files changed, 221 insertions(+), 2 deletions(-) > create mode 100644 drivers/button/button-adc.c > create mode 100644 drivers/clk/meson/g12a-ao.c > Applied patches 1 to 4 to u-boot-amlogic-next Also updated khadas-vim3l_defconfig in the same time in patch 4. Thx Neil
Hi All, This patchset adds all building blocks needed for checking the 'Function' button state in the boot script on Amlogic A311D based VIM3 board. This button is connected to the ADC lines of the SoC, so it required to enable meson SARADC, the clocks needed for it and a simple button-adc drivers. Once applied, one can use following commands in the boot scripts: -->8--- echo Checking Func button state: \\c if button Function then echo Selected alternative boot ... fi --->8--- The above script requires commit a6bfd71a96 ("cmd/button: return button status") already present in mainline tree. Best regards Marek Szyprowski Samsung R&D Institute Poland Changelog: v3: - removed 'button' env variable - extended kconfig and patch descriptions v2: https://lists.denx.de/pipermail/u-boot/2020-December/434991.html - removed Change-Id tags - split defconfig changes into ADC and button related v1: https://lists.denx.de/pipermail/u-boot/2020-December/434875.html - initial submission Patch summary: Marek Szyprowski (6): clk: meson: add minimal driver for g12a-ao clocks adc: meson-saradc: add G12A variant adc: meson-saradc: skip hardware init only if ADC is enabled configs: khadas-vim3: enable ADC device support button: add a simple ADC-based button driver configs: khadas-vim3: enable Function button support configs/khadas-vim3_defconfig | 4 ++ drivers/adc/meson-saradc.c | 9 ++- drivers/button/Kconfig | 8 +++ drivers/button/Makefile | 1 + drivers/button/button-adc.c | 117 ++++++++++++++++++++++++++++++++++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/g12a-ao.c | 83 ++++++++++++++++++++++++ 7 files changed, 221 insertions(+), 2 deletions(-) create mode 100644 drivers/button/button-adc.c create mode 100644 drivers/clk/meson/g12a-ao.c -- 2.17.1