@@ -32,6 +32,15 @@ CXL Memory Device
.. kernel-doc:: drivers/cxl/mem.c
:internal:
+CXL IOCTL Interface
+-------------------
+
+.. kernel-doc:: include/uapi/linux/cxl_mem.h
+ :doc: UAPI
+
+.. kernel-doc:: include/uapi/linux/cxl_mem.h
+ :internal:
+
External Interfaces
===================
@@ -7,6 +7,7 @@
#include <linux/idr.h>
#include <linux/pci.h>
#include <linux/io.h>
+#include <uapi/linux/cxl_mem.h>
#include "acpi.h"
#include "pci.h"
#include "cxl.h"
@@ -73,6 +74,49 @@ static DEFINE_IDR(cxl_mem_idr);
/* protect cxl_mem_idr allocations */
static DEFINE_MUTEX(cxl_memdev_lock);
+/*
+ * This table defines the supported mailboxes commands for the driver. The id is
+ * ordinal and thus gaps in this table aren't allowed. This table is made up of
+ * a UAPI structure. Non-negative values in the table will be validated against
+ * the user's input. For example, if size_in is 0, and the user passed in 1, it
+ * is an error.
+ */
+#define CXL_CMD(_id, _flags, sin, sout, _name, _enable, op) \
+ { \
+ { .id = CXL_MEM_COMMAND_ID_##_id, \
+ .flags = CXL_MEM_COMMAND_FLAG_##_flags, \
+ .size_in = sin, \
+ .size_out = sout, \
+ .name = _name }, \
+ .enable = _enable, .opcode = op \
+ }
+
+/**
+ * struct cxl_mem_command - Driver representation of a memory device command
+ * @info: Command information as it exists for the UAPI
+ * @opcode: The actual bits used for the mailbox protocol
+ * @enable: Whether the command is enabled. The driver may support a large set
+ * of commands that may not be enabled. The primary reason a command
+ * would not be enabled is for commands that are specified as optional
+ * and the hardware doesn't support the command.
+ *
+ * The cxl_mem_command is the driver's internal representation of commands that
+ * are supported by the driver. Some of these commands may not be supported by
+ * the hardware (!@enable). The driver will use @info to validate the fields
+ * passed in by the user then submit the @opcode to the hardware.
+ *
+ * See struct cxl_command_info.
+ */
+struct cxl_mem_command {
+ const struct cxl_command_info info;
+ const u16 opcode;
+ bool enable;
+};
+
+static struct cxl_mem_command mem_commands[] = {
+ CXL_CMD(INVALID, NONE, 0, 0, "Reserved", false, 0),
+};
+
static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
{
const int timeout = msecs_to_jiffies(2000);
@@ -268,8 +312,53 @@ static int cxl_mem_open(struct inode *inode, struct file *file)
return 0;
}
+static int cxl_mem_count_commands(void)
+{
+ int i, n = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mem_commands); i++) {
+ struct cxl_mem_command *c = &mem_commands[i];
+
+ if (c->enable)
+ n++;
+ }
+
+ return n;
+}
+
static long cxl_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
+ if (cmd == CXL_MEM_QUERY_COMMANDS) {
+ struct cxl_mem_query_commands __user *q = (void __user *)arg;
+ u32 n_commands;
+ int i, j;
+
+ if (get_user(n_commands, (u32 __user *)arg))
+ return -EFAULT;
+
+ if (n_commands == 0)
+ return put_user(cxl_mem_count_commands(),
+ (u32 __user *)arg);
+
+ for (i = 0, j = 0;
+ i < ARRAY_SIZE(mem_commands) && j < n_commands; i++) {
+ struct cxl_mem_command *c = &mem_commands[i];
+ const struct cxl_command_info *info = &c->info;
+
+ if (!c->enable)
+ continue;
+
+ if (copy_to_user(&q->commands[j], info, sizeof(*info)))
+ return -EFAULT;
+
+ if (copy_to_user(&q->commands[j].name, info->name,
+ strlen(info->name)))
+ return -EFAULT;
+
+ j++;
+ }
+ }
+
return -ENOTTY;
}
new file mode 100644
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * CXL IOCTLs for Memory Devices
+ */
+
+#ifndef _UAPI_CXL_MEM_H_
+#define _UAPI_CXL_MEM_H_
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/**
+ * DOC: UAPI
+ *
+ * CXL memory devices expose UAPI to have a standard user interface.
+ * Userspace can refer to these structure definitions and UAPI formats
+ * to communicate to driver
+ */
+
+#define CXL_MEM_QUERY_COMMANDS _IOR('C', 1, struct cxl_mem_query_commands)
+
+#define CXL_MEM_COMMAND_NAME_LENGTH 32
+
+/**
+ * struct cxl_command_info - Command information returned from a query.
+ * @id: ID number for the command.
+ * @flags: Flags that specify command behavior.
+ *
+ * - CXL_MEM_COMMAND_FLAG_TAINT: Using this command will taint the kernel.
+ * @size_in: Expected input size, or -1 if variable length.
+ * @size_out: Expected output size, or -1 if variable length.
+ * @name: Name describing the command.
+ *
+ * Represents a single command that is supported by both the driver and the
+ * hardware. The is returned as part of an array from the query ioctl. The
+ * following would be a command named "foobar" that takes a variable length
+ * input and returns 0 bytes of output.
+ *
+ * - @id = 10
+ * - @name = foobar
+ * - @flags = 0
+ * - @size_in = -1
+ * - @size_out = 0
+ *
+ * See struct cxl_mem_query_commands.
+ */
+struct cxl_command_info {
+ __u32 id;
+#define CXL_MEM_COMMAND_ID_INVALID 0
+
+ __u32 flags;
+#define CXL_MEM_COMMAND_FLAG_NONE 0
+#define CXL_MEM_COMMAND_FLAG_TAINT BIT(0)
+
+ __s32 size_in;
+ __s32 size_out;
+
+ char name[32];
+};
+
+/**
+ * struct cxl_mem_query_commands - Query supported commands.
+ * @n_commands: In/out parameter. When @n_commands is > 0, the driver will
+ * return min(num_support_commands, n_commands). When @n_commands
+ * is 0, driver will return the number of total supported commands.
+ * @rsvd: Reserved for future use.
+ * @commands: Output array of supported commands. This array must be allocated
+ * by userspace to be at least min(num_support_commands, @n_commands)
+ *
+ * Allow userspace to query the available commands supported by both the driver,
+ * and the hardware. Commands that aren't supported by either the driver, or the
+ * hardware are not returned in the query.
+ *
+ * Examples:
+ *
+ * - { .n_commands = 0 } // Get number of supported commands
+ * - { .n_commands = 15, .commands = buf } // Return first 15 (or less)
+ * supported commands
+ *
+ * See struct cxl_command_info.
+ */
+struct cxl_mem_query_commands {
+ /*
+ * Input: Number of commands to return (space allocated by user)
+ * Output: Number of commands supported by the driver/hardware
+ *
+ * If n_commands is 0, kernel will only return number of commands and
+ * not try to populate commands[], thus allowing userspace to know how
+ * much space to allocate
+ */
+ __u32 n_commands;
+ __u32 rsvd;
+
+ struct cxl_command_info __user commands[]; /* out: supported commands */
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif