| Message ID | 20201204054347.2877857-5-vkoul@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add binding and dts for Qualcomm SM8350 | expand |
On Fri, Dec 04, 2020 at 11:13:47AM +0530, Vinod Koul wrote: > Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC > MTP board. This enabled uart node and adds rpmh-regulators present for > this board. Please make sure this is warning free with dtbs_check. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 246 ++++++++++++++++++++++++ > 2 files changed, 247 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index fb4631f898fd..cad6a1413c8b 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -43,3 +43,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts > new file mode 100644 > index 000000000000..d7b2448530ff > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts > @@ -0,0 +1,246 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2020, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8350.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. sm8350 MTP"; > + compatible = "qcom,sm8350-mtp"; > + > + aliases { > + serial0 = &uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&apps_rsc { > + pm8350-rpmh-regulators { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-s11-supply = <&vph_pwr>; > + vdd-s12-supply = <&vph_pwr>; > + > + vdd-l1-l4-supply = <&vreg_s11b_0p95>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_bob>; > + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; > + vdd-l8-supply = <&vreg_s2c_0p8>; > + > + vreg_s10b_1p8: smps10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s11b_0p95: smps11 { > + regulator-min-microvolt = <752000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + vreg_s12b_1p25: smps12 { > + regulator-min-microvolt = <1224000>; > + regulator-max-microvolt = <1360000>; > + }; > + > + vreg_l1b_0p88: ldo1 { > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p07: ldo2 { > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3b_0p9: ldo3 { > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_0p88: ldo5 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <888000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p2: ldo6 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1208000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_2p96: ldo7 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_1p2: ldo9 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8350c-rpmh-regulators { > + compatible = "qcom,pm8350c-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l12-supply = <&vreg_s1c_1p86>; > + vdd-l2-l8-supply = <&vreg_s1c_1p86>; > + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; > + vdd-l6-l9-l11-supply = <&vreg_bob>; > + vdd-l10-supply = <&vreg_s12b_1p25>; > + > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_s1c_1p86: smps1 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + vreg_s2c_0p8: smps2 { > + regulator-min-microvolt = <640000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + vreg_s10c_1p05: smps10 { > + regulator-min-microvolt = <1048000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_1p8: ldo2 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_3p0: ldo3 { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4c_uim1: ldo4 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5c_uim2: ldo5 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_1p8: ldo6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c_3p0: ldo7 { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p96: ldo9 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_1p2: ldo10 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_2p96: ldo11 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12c_1p8: ldo12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13c_3p0: ldo13 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > -- > 2.26.2 >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index fb4631f898fd..cad6a1413c8b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -43,3 +43,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts new file mode 100644 index 000000000000..d7b2448530ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sm8350 MTP"; + compatible = "qcom,sm8350-mtp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p96: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_uim1: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_uim2: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_1p2: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p96: ldo11 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +};
Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC MTP board. This enabled uart node and adds rpmh-regulators present for this board. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 246 ++++++++++++++++++++++++ 2 files changed, 247 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts -- 2.26.2