diff mbox series

arm64: dts: rockchip: rk3328: Fix UART pull-ups

Message ID 20201204064805.6480-1-wens@kernel.org
State New
Headers show
Series arm64: dts: rockchip: rk3328: Fix UART pull-ups | expand

Commit Message

Chen-Yu Tsai Dec. 4, 2020, 6:48 a.m. UTC 
From: Chen-Yu Tsai <wens@csie.org>

For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.

This gets rid of bogus sysrq events when the UART console is not
connected.

Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Heiko Stübner Dec. 4, 2020, 11:01 a.m. UTC | #1 
On Fri, 4 Dec 2020 14:48:05 +0800, Chen-Yu Tsai wrote:
> For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
> UARTs transmit active-low, so a disconnected RX pin should be pulled
> high instead of left floating to prevent noise being interpreted as
> transmissions.
> 
> This gets rid of bogus sysrq events when the UART console is not
> connected.

Applied, thanks!

[1/1] arm64: dts: rockchip: rk3328: Fix UART pull-ups
      commit: 94dad6bed3c86c00050bf7c2b2ad6b630facae31

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 521c4678ec35..1e3aa6acbc11 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -1265,8 +1265,8 @@  otp_out: otp-out {
 
 		uart0 {
 			uart0_xfer: uart0-xfer {
-				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
-						<1 RK_PB0 1 &pcfg_pull_none>;
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB0 1 &pcfg_pull_up>;
 			};
 
 			uart0_cts: uart0-cts {
@@ -1284,8 +1284,8 @@  uart0_rts_pin: uart0-rts-pin {
 
 		uart1 {
 			uart1_xfer: uart1-xfer {
-				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
-						<3 RK_PA6 4 &pcfg_pull_none>;
+				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+						<3 RK_PA6 4 &pcfg_pull_up>;
 			};
 
 			uart1_cts: uart1-cts {
@@ -1303,15 +1303,15 @@  uart1_rts_pin: uart1-rts-pin {
 
 		uart2-0 {
 			uart2m0_xfer: uart2m0-xfer {
-				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
-						<1 RK_PA1 2 &pcfg_pull_none>;
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+						<1 RK_PA1 2 &pcfg_pull_up>;
 			};
 		};
 
 		uart2-1 {
 			uart2m1_xfer: uart2m1-xfer {
-				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
-						<2 RK_PA1 1 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+						<2 RK_PA1 1 &pcfg_pull_up>;
 			};
 		};