| Message ID | 20201201123932.12312-8-martin.kepplinger@puri.sm |
|---|---|
| State | New |
| Headers | show |
| Series | imx8mq: updates for the interconnect fabric | expand |
On 1.12.20 14:39, Martin Kepplinger wrote: > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely > available for testing. I hope that it's not just for testing, but using it. > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > --- > arch/arm64/configs/defconfig | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 1fed16950a7c..830c26a95b3d 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y > CONFIG_MUX_MMIO=y > CONFIG_SLIM_QCOM_CTRL=m > CONFIG_SLIM_QCOM_NGD_CTRL=m > -CONFIG_INTERCONNECT=y Why are you removing this line? Thanks, Georgi > +CONFIG_INTERCONNECT_IMX=m > +CONFIG_INTERCONNECT_IMX8MQ=m > CONFIG_INTERCONNECT_QCOM=y > CONFIG_INTERCONNECT_QCOM_MSM8916=m > CONFIG_INTERCONNECT_QCOM_SDM845=m >
On Tue, Dec 01, 2020 at 01:39:32PM +0100, Martin Kepplinger wrote: > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely > available for testing. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > --- > arch/arm64/configs/defconfig | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote: > On 01.12.20 14:10, Georgi Djakov wrote: > > On 1.12.20 14:39, Martin Kepplinger wrote: > > > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely > > > available for testing. > > > > I hope that it's not just for testing, but using it. > > sure, I just think that most people will use their own config for production > but that's a different story. I can rephrase. > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > > --- > > > arch/arm64/configs/defconfig | 3 ++- > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > > > index 1fed16950a7c..830c26a95b3d 100644 > > > --- a/arch/arm64/configs/defconfig > > > +++ b/arch/arm64/configs/defconfig > > > @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y > > > CONFIG_MUX_MMIO=y > > > CONFIG_SLIM_QCOM_CTRL=m > > > CONFIG_SLIM_QCOM_NGD_CTRL=m > > > -CONFIG_INTERCONNECT=y > > > > Why are you removing this line? > > savedefconfig removes it. INTERCONNECT_IMX below depends on it. It's save to remove it as other Interconnect options are directly dependant. Best regards, Krzysztof
On Wed, 2 Dec 2020 at 10:03, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote: > > On 01.12.20 14:10, Georgi Djakov wrote: > > > On 1.12.20 14:39, Martin Kepplinger wrote: > > > > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely > > > > available for testing. > > > > > > I hope that it's not just for testing, but using it. > > > > sure, I just think that most people will use their own config for production > > but that's a different story. I can rephrase. > > > > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > > > --- > > > > arch/arm64/configs/defconfig | 3 ++- > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > > > > index 1fed16950a7c..830c26a95b3d 100644 > > > > --- a/arch/arm64/configs/defconfig > > > > +++ b/arch/arm64/configs/defconfig > > > > @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y > > > > CONFIG_MUX_MMIO=y > > > > CONFIG_SLIM_QCOM_CTRL=m > > > > CONFIG_SLIM_QCOM_NGD_CTRL=m > > > > -CONFIG_INTERCONNECT=y > > > > > > Why are you removing this line? > > > > savedefconfig removes it. INTERCONNECT_IMX below depends on it. > > It's save to remove it as other Interconnect options are directly > dependant. Ugh, my bad, it is not allowed to remove it. My review was too fast. INTERCONNECT_IMX depends on it, so the INTERCONNECT must stay, It is selected by TEGRA_MC which is independent here, so you should keep it. Best regards, Krzysztof
On 02.12.20 09:05, Krzysztof Kozlowski wrote: > On Wed, 2 Dec 2020 at 10:03, Krzysztof Kozlowski <krzk@kernel.org> wrote: >> >> On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote: >>> On 01.12.20 14:10, Georgi Djakov wrote: >>>> On 1.12.20 14:39, Martin Kepplinger wrote: >>>>> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely >>>>> available for testing. >>>> >>>> I hope that it's not just for testing, but using it. >>> >>> sure, I just think that most people will use their own config for production >>> but that's a different story. I can rephrase. >>> >>>> >>>>> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> >>>>> --- >>>>> arch/arm64/configs/defconfig | 3 ++- >>>>> 1 file changed, 2 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig >>>>> index 1fed16950a7c..830c26a95b3d 100644 >>>>> --- a/arch/arm64/configs/defconfig >>>>> +++ b/arch/arm64/configs/defconfig >>>>> @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y >>>>> CONFIG_MUX_MMIO=y >>>>> CONFIG_SLIM_QCOM_CTRL=m >>>>> CONFIG_SLIM_QCOM_NGD_CTRL=m >>>>> -CONFIG_INTERCONNECT=y >>>> >>>> Why are you removing this line? >>> >>> savedefconfig removes it. INTERCONNECT_IMX below depends on it. >> >> It's save to remove it as other Interconnect options are directly >> dependant. > > Ugh, my bad, it is not allowed to remove it. My review was too fast. > INTERCONNECT_IMX depends on it, so the INTERCONNECT must stay, > > It is selected by TEGRA_MC which is independent here, so you should keep it. > thanks for reviewing! Just to be clear: We're talking about defconfig, so if I keep INTERCONNECT that means that I do `make savedefconfig` which removes it (it's of course still enabled, just redundant in defconfig output), and then *manually* add INTERCONNECT. That would indicate that there's a Kconfig bug. thanks, martin
On Wed, 2 Dec 2020 at 13:30, Martin Kepplinger <martin.kepplinger@puri.sm> wrote: > >>>>> -CONFIG_INTERCONNECT=y > >>>> > >>>> Why are you removing this line? > >>> > >>> savedefconfig removes it. INTERCONNECT_IMX below depends on it. > >> > >> It's save to remove it as other Interconnect options are directly > >> dependant. > > > > Ugh, my bad, it is not allowed to remove it. My review was too fast. > > INTERCONNECT_IMX depends on it, so the INTERCONNECT must stay, > > > > It is selected by TEGRA_MC which is independent here, so you should keep it. > > > > thanks for reviewing! Just to be clear: We're talking about defconfig, > so if I keep INTERCONNECT that means that I do `make savedefconfig` > which removes it (it's of course still enabled, just redundant in > defconfig output), and then *manually* add INTERCONNECT. That would > indicate that there's a Kconfig bug. I don't get the point. You should not send the savedefconfig output as is, without any adjustments and checks. You can run savedefconfig because it nicely puts your entries in the proper place, but it's not a bug that it removes features which we *want to keep*. Where is a bug in Kconfig? Best regards, Krzysztof
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 1fed16950a7c..830c26a95b3d 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y CONFIG_MUX_MMIO=y CONFIG_SLIM_QCOM_CTRL=m CONFIG_SLIM_QCOM_NGD_CTRL=m -CONFIG_INTERCONNECT=y +CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX8MQ=m CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8916=m CONFIG_INTERCONNECT_QCOM_SDM845=m
Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely available for testing. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)