diff mbox series

[3/3] soc: qcom: llcc-qcom: Add support for SM8250 SoC

Message ID 20201127121127.158082-4-manivannan.sadhasivam@linaro.org
State Accepted
Commit c4df37fe186de4df8895a7a4793f5221eda6e5ae
Headers show
Series Add LLCC support for SM8250 SoC | expand

Commit Message

Manivannan Sadhasivam Nov. 27, 2020, 12:11 p.m. UTC 
SM8250 SoC uses LLCC IP version 2. In this version, the WRSC_EN register
needs to be written to enable the Write Sub Cache for each SCID. Hence,
use a dedicated "write_scid_en" member with predefined values and write
them for SoCs enabling the "llcc_v2" flag.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/soc/qcom/llcc-qcom.c       | 40 ++++++++++++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h |  1 +
 2 files changed, 41 insertions(+)

Comments

Manivannan Sadhasivam Nov. 27, 2020, 4:07 p.m. UTC | #1 
Hi Sai,

On Fri, Nov 27, 2020 at 07:09:09PM +0530, Sai Prakash Ranjan wrote:
> Hi Mani,
> 
> On 2020-11-27 17:41, Manivannan Sadhasivam wrote:
> > SM8250 SoC uses LLCC IP version 2. In this version, the WRSC_EN register
> > needs to be written to enable the Write Sub Cache for each SCID. Hence,
> > use a dedicated "write_scid_en" member with predefined values and write
> > them for SoCs enabling the "llcc_v2" flag.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/soc/qcom/llcc-qcom.c       | 40 ++++++++++++++++++++++++++++++
> >  include/linux/soc/qcom/llcc-qcom.h |  1 +
> >  2 files changed, 41 insertions(+)
> > 
> > diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> > index 16b421608e9c..3ec4cdffa852 100644
> > --- a/drivers/soc/qcom/llcc-qcom.c
> > +++ b/drivers/soc/qcom/llcc-qcom.c
> > @@ -47,6 +47,7 @@
> > 
> >  #define LLCC_TRP_SCID_DIS_CAP_ALLOC   0x21f00
> >  #define LLCC_TRP_PCB_ACT              0x21f04
> > +#define LLCC_TRP_WRSC_EN              0x21f20
> > 
> >  #define BANK_OFFSET_STRIDE	      0x80000
> > 
> > @@ -73,6 +74,7 @@
> >   *               then the ways assigned to this client are not flushed
> > on power
> >   *               collapse.
> >   * @activate_on_init: Activate the slice immediately after it is
> > programmed
> > + * @write_scid_en: Bit enables write cache support for a given scid.
> >   */
> >  struct llcc_slice_config {
> >  	u32 usecase_id;
> > @@ -87,12 +89,14 @@ struct llcc_slice_config {
> >  	bool dis_cap_alloc;
> >  	bool retain_on_pc;
> >  	bool activate_on_init;
> > +	bool write_scid_en;
> >  };
> > 
> >  struct qcom_llcc_config {
> >  	const struct llcc_slice_config *sct_data;
> >  	int size;
> >  	bool need_llcc_cfg;
> > +	bool llcc_v2;
> >  };
> 
> We can extract the version from HW info register and so
> would not have to maintain a flag for every new version
> of LLCC. I had a patch to do that which I have sent to you
> now, perhaps you can check if that works for you and take
> it with this series?
> 

Yeah sure. Will do.

Thanks,
Mani

> Thanks,
> Sai
> 
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 16b421608e9c..3ec4cdffa852 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -47,6 +47,7 @@ 
 
 #define LLCC_TRP_SCID_DIS_CAP_ALLOC   0x21f00
 #define LLCC_TRP_PCB_ACT              0x21f04
+#define LLCC_TRP_WRSC_EN              0x21f20
 
 #define BANK_OFFSET_STRIDE	      0x80000
 
@@ -73,6 +74,7 @@ 
  *               then the ways assigned to this client are not flushed on power
  *               collapse.
  * @activate_on_init: Activate the slice immediately after it is programmed
+ * @write_scid_en: Bit enables write cache support for a given scid.
  */
 struct llcc_slice_config {
 	u32 usecase_id;
@@ -87,12 +89,14 @@  struct llcc_slice_config {
 	bool dis_cap_alloc;
 	bool retain_on_pc;
 	bool activate_on_init;
+	bool write_scid_en;
 };
 
 struct qcom_llcc_config {
 	const struct llcc_slice_config *sct_data;
 	int size;
 	bool need_llcc_cfg;
+	bool llcc_v2;
 };
 
 static const struct llcc_slice_config sc7180_data[] =  {
@@ -147,6 +151,25 @@  static const struct llcc_slice_config sm8150_data[] =  {
 	{  LLCC_WRCACHE, 31, 128,  1, 1, 0xFFF, 0x0,   0, 0, 0, 0, 0 },
 };
 
+static const struct llcc_slice_config sm8250_data[] =  {
+	{ LLCC_CPUSS,    1, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 1, 0 },
+	{ LLCC_VIDSC0,   2, 512,  3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_AUDIO,    6, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 0, 0, 0 },
+	{ LLCC_CMPT,    10, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 0, 0, 0 },
+	{ LLCC_GPUHTW,  11, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_GPU,     12, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 1 },
+	{ LLCC_MMUHWT,  13, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+	{ LLCC_CMPTDMA, 15, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_DISP,    16, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_VIDFW,   17, 512,  1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_AUDHW,   22, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_NPU,     23, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_WLHW,    24, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_CVP,     28, 256,  3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_APTCM,   30, 128,  3, 0, 0x0,   0x3, 1, 0, 0, 1, 0, 0 },
+	{ LLCC_WRCACHE, 31, 256,  1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+};
+
 static const struct qcom_llcc_config sc7180_cfg = {
 	.sct_data	= sc7180_data,
 	.size		= ARRAY_SIZE(sc7180_data),
@@ -164,6 +187,12 @@  static const struct qcom_llcc_config sm8150_cfg = {
 	.size           = ARRAY_SIZE(sm8150_data),
 };
 
+static const struct qcom_llcc_config sm8250_cfg = {
+	.sct_data       = sm8250_data,
+	.size           = ARRAY_SIZE(sm8250_data),
+	.llcc_v2	= true,
+};
+
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
 
 /**
@@ -413,6 +442,16 @@  static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
 			return ret;
 	}
 
+	if (cfg->llcc_v2) {
+		u32 wren;
+
+		wren = config->write_scid_en << config->slice_id;
+		ret = regmap_update_bits(drv_data->bcast_regmap, LLCC_TRP_WRSC_EN,
+					 BIT(config->slice_id), wren);
+		if (ret)
+			return ret;
+	}
+
 	if (config->activate_on_init) {
 		desc.slice_id = config->slice_id;
 		ret = llcc_slice_activate(&desc);
@@ -559,6 +598,7 @@  static const struct of_device_id qcom_llcc_of_match[] = {
 	{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
 	{ .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
 	{ .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
+	{ .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
 	{ }
 };
 
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 3db6797ba6ff..85f18ae7692f 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -29,6 +29,7 @@ 
 #define LLCC_AUDHW       22
 #define LLCC_NPU         23
 #define LLCC_WLHW        24
+#define LLCC_CVP         28
 #define LLCC_MODPE       29
 #define LLCC_APTCM       30
 #define LLCC_WRCACHE     31