| Message ID | 20201119141307.8342-1-pawell@cadence.com |
|---|---|
| Headers | show |
| Series | Introduced new Cadence USBSSP DRD Driver. | expand |
On 20-11-19 15:12:57, Pawel Laszczak wrote: > This patch introduce new Cadence USBSS DRD driver to linux kernel. > > The Cadence USBSS DRD Controller is a highly configurable IP Core which > can be instantiated as Dual-Role Device (DRD), Peripheral Only and > Host Only (XHCI)configurations. > > The current driver has been validated with FPGA burned. We have support > for PCIe bus, which is used on FPGA prototyping. > > The host side of USBSS-DRD controller is compliance with XHCI > specification, so it works with standard XHCI Linux driver. > > The device side of USBSS DRD controller is compliant with XHCI. > The architecture for device side is almost the same as for host side, > and most of the XHCI specification can be used to understand how > this controller operates. > > This controller and driver support Full Speed, Hight Speed, Supper Speed > and Supper Speed Plus USB protocol. > > The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. > The last letter of this acronym means PLUS. The formal name of controller > is USBSSP but it's to generic so I've decided to use CDNSP. > > The patch 1: adds support for DRD CDNSP. > The patch 2: separates common code that can be reusable by cdnsp driver. > The patch 3: moves reusable code to separate module. > The patch 4: changes prefixes in reusable code from cdns3 to common cdns. > The patch 5: adopts gadget_dev pointer in cdns structure to make possible > use it in both drivers. > The patches 6-8: add the main part of driver and has been intentionally > split into 3 part. In my opinion such division should not > affect understanding and reviewing the driver, and cause that > main patch (7/8) is little smaller. Patch 6 introduces main > header file for driver, 7 is the main part that implements all > functionality of driver and 8 introduces tracepoints. > The patch 9: Adds cdns3 prefixes to files related with USBSS driver. > the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. > > Changlog from v2: > - removed not used pdev parameter from cdnsp_read/wite_64 functions > - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) > - replaced some constant value with CDNSP_ENDPOINTS_NUM macro > - replaced 'true' with '1' in bits description in cdnsp-gadget.h file > - fixed some typos > - some other less important changes suggested by Peter Chen Hi Pawel, I have updated my -next tree as the latest usb-next tree which v5.10-rc4 is included, would you please rebase my tree and send again, I could apply your patches and test, if test could pass, I will apply it to my -next tree. You don't need to rebase again since it is a huge patch set, will take some efforts for rebase. Peter > > Changlog from v1: > - updated common code to latest cdns3 driver > - moved cdnsp driver files to cdns3 as sugested by Peter Chan > - removed duplicate code from cdnsp_ep0_set_config function > - added cdns3 prefixes to file related with USBSS driver > - updated MAINTAINERS file > - fixed issue with U1 > - fixed issue with L1 > - some less improtant changes sugested by Chunfeng Yun > --- > > Pawel Laszczak (10): > usb: cdns3: Add support for DRD CDNSP > usb: cdns3: Split core.c into cdns3-plat and core.c file > usb: cdns3: Moves reusable code to separate module > usb: cdns3: Refactoring names in reusable code > usb: cdns3: Changed type of gadget_dev in cdns structure > usb: cdnsp: Device side header file for CDNSP driver > usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver > usb: cdnsp: Add tracepoints for CDNSP driver > usb: cdns3: Change file names for cdns3 driver. > MAINTAINERS: add Cadence USBSSP DRD IP driver entry > > MAINTAINERS | 8 + > drivers/usb/Makefile | 2 + > drivers/usb/cdns3/Kconfig | 61 +- > drivers/usb/cdns3/Makefile | 30 +- > drivers/usb/cdns3/{debug.h => cdns3-debug.h} | 0 > drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} | 4 +- > .../usb/cdns3/{gadget.c => cdns3-gadget.c} | 28 +- > .../usb/cdns3/{gadget.h => cdns3-gadget.h} | 0 > drivers/usb/cdns3/cdns3-imx.c | 2 +- > drivers/usb/cdns3/cdns3-plat.c | 315 +++ > drivers/usb/cdns3/{trace.c => cdns3-trace.c} | 2 +- > drivers/usb/cdns3/{trace.h => cdns3-trace.h} | 6 +- > drivers/usb/cdns3/cdnsp-debug.h | 583 ++++ > drivers/usb/cdns3/cdnsp-ep0.c | 495 ++++ > drivers/usb/cdns3/cdnsp-gadget.c | 2017 ++++++++++++++ > drivers/usb/cdns3/cdnsp-gadget.h | 1600 +++++++++++ > drivers/usb/cdns3/cdnsp-mem.c | 1325 +++++++++ > drivers/usb/cdns3/cdnsp-pci.c | 255 ++ > drivers/usb/cdns3/cdnsp-ring.c | 2439 +++++++++++++++++ > drivers/usb/cdns3/cdnsp-trace.c | 12 + > drivers/usb/cdns3/cdnsp-trace.h | 840 ++++++ > drivers/usb/cdns3/core.c | 454 +-- > drivers/usb/cdns3/core.h | 54 +- > drivers/usb/cdns3/drd.c | 222 +- > drivers/usb/cdns3/drd.h | 94 +- > drivers/usb/cdns3/gadget-export.h | 22 +- > drivers/usb/cdns3/host-export.h | 13 +- > drivers/usb/cdns3/host.c | 22 +- > 28 files changed, 10398 insertions(+), 507 deletions(-) > rename drivers/usb/cdns3/{debug.h => cdns3-debug.h} (100%) > rename drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} (99%) > rename drivers/usb/cdns3/{gadget.c => cdns3-gadget.c} (99%) > rename drivers/usb/cdns3/{gadget.h => cdns3-gadget.h} (100%) > create mode 100644 drivers/usb/cdns3/cdns3-plat.c > rename drivers/usb/cdns3/{trace.c => cdns3-trace.c} (89%) > rename drivers/usb/cdns3/{trace.h => cdns3-trace.h} (99%) > create mode 100644 drivers/usb/cdns3/cdnsp-debug.h > create mode 100644 drivers/usb/cdns3/cdnsp-ep0.c > create mode 100644 drivers/usb/cdns3/cdnsp-gadget.c > create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h > create mode 100644 drivers/usb/cdns3/cdnsp-mem.c > create mode 100644 drivers/usb/cdns3/cdnsp-pci.c > create mode 100644 drivers/usb/cdns3/cdnsp-ring.c > create mode 100644 drivers/usb/cdns3/cdnsp-trace.c > create mode 100644 drivers/usb/cdns3/cdnsp-trace.h > > -- > 2.17.1 > -- Thanks, Peter Chen
Peter, >On 20-11-19 15:12:57, Pawel Laszczak wrote: >> This patch introduce new Cadence USBSS DRD driver to linux kernel. >> >> The Cadence USBSS DRD Controller is a highly configurable IP Core which >> can be instantiated as Dual-Role Device (DRD), Peripheral Only and >> Host Only (XHCI)configurations. >> >> The current driver has been validated with FPGA burned. We have support >> for PCIe bus, which is used on FPGA prototyping. >> >> The host side of USBSS-DRD controller is compliance with XHCI >> specification, so it works with standard XHCI Linux driver. >> >> The device side of USBSS DRD controller is compliant with XHCI. >> The architecture for device side is almost the same as for host side, >> and most of the XHCI specification can be used to understand how >> this controller operates. >> >> This controller and driver support Full Speed, Hight Speed, Supper Speed >> and Supper Speed Plus USB protocol. >> >> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. >> The last letter of this acronym means PLUS. The formal name of controller >> is USBSSP but it's to generic so I've decided to use CDNSP. >> >> The patch 1: adds support for DRD CDNSP. >> The patch 2: separates common code that can be reusable by cdnsp driver. >> The patch 3: moves reusable code to separate module. >> The patch 4: changes prefixes in reusable code from cdns3 to common cdns. >> The patch 5: adopts gadget_dev pointer in cdns structure to make possible >> use it in both drivers. >> The patches 6-8: add the main part of driver and has been intentionally >> split into 3 part. In my opinion such division should not >> affect understanding and reviewing the driver, and cause that >> main patch (7/8) is little smaller. Patch 6 introduces main >> header file for driver, 7 is the main part that implements all >> functionality of driver and 8 introduces tracepoints. >> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. >> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. >> >> Changlog from v2: >> - removed not used pdev parameter from cdnsp_read/wite_64 functions >> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) >> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro >> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file >> - fixed some typos >> - some other less important changes suggested by Peter Chen > >Hi Pawel, > >I have updated my -next tree as the latest usb-next tree which v5.10-rc4 >is included, would you please rebase my tree and send again, I could apply your >patches and test, if test could pass, I will apply it to my -next tree. >You don't need to rebase again since it is a huge patch set, will take some >efforts for rebase. > I'll try to post it tomorrow. >> >> Changlog from v1: >> - updated common code to latest cdns3 driver >> - moved cdnsp driver files to cdns3 as sugested by Peter Chan >> - removed duplicate code from cdnsp_ep0_set_config function >> - added cdns3 prefixes to file related with USBSS driver >> - updated MAINTAINERS file >> - fixed issue with U1 >> - fixed issue with L1 >> - some less improtant changes sugested by Chunfeng Yun >> --- >> >> Pawel Laszczak (10): >> usb: cdns3: Add support for DRD CDNSP >> usb: cdns3: Split core.c into cdns3-plat and core.c file >> usb: cdns3: Moves reusable code to separate module >> usb: cdns3: Refactoring names in reusable code >> usb: cdns3: Changed type of gadget_dev in cdns structure >> usb: cdnsp: Device side header file for CDNSP driver >> usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver >> usb: cdnsp: Add tracepoints for CDNSP driver >> usb: cdns3: Change file names for cdns3 driver. >> MAINTAINERS: add Cadence USBSSP DRD IP driver entry >> >> MAINTAINERS | 8 + >> drivers/usb/Makefile | 2 + >> drivers/usb/cdns3/Kconfig | 61 +- >> drivers/usb/cdns3/Makefile | 30 +- >> drivers/usb/cdns3/{debug.h => cdns3-debug.h} | 0 >> drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} | 4 +- >> .../usb/cdns3/{gadget.c => cdns3-gadget.c} | 28 +- >> .../usb/cdns3/{gadget.h => cdns3-gadget.h} | 0 >> drivers/usb/cdns3/cdns3-imx.c | 2 +- >> drivers/usb/cdns3/cdns3-plat.c | 315 +++ >> drivers/usb/cdns3/{trace.c => cdns3-trace.c} | 2 +- >> drivers/usb/cdns3/{trace.h => cdns3-trace.h} | 6 +- >> drivers/usb/cdns3/cdnsp-debug.h | 583 ++++ >> drivers/usb/cdns3/cdnsp-ep0.c | 495 ++++ >> drivers/usb/cdns3/cdnsp-gadget.c | 2017 ++++++++++++++ >> drivers/usb/cdns3/cdnsp-gadget.h | 1600 +++++++++++ >> drivers/usb/cdns3/cdnsp-mem.c | 1325 +++++++++ >> drivers/usb/cdns3/cdnsp-pci.c | 255 ++ >> drivers/usb/cdns3/cdnsp-ring.c | 2439 +++++++++++++++++ >> drivers/usb/cdns3/cdnsp-trace.c | 12 + >> drivers/usb/cdns3/cdnsp-trace.h | 840 ++++++ >> drivers/usb/cdns3/core.c | 454 +-- >> drivers/usb/cdns3/core.h | 54 +- >> drivers/usb/cdns3/drd.c | 222 +- >> drivers/usb/cdns3/drd.h | 94 +- >> drivers/usb/cdns3/gadget-export.h | 22 +- >> drivers/usb/cdns3/host-export.h | 13 +- >> drivers/usb/cdns3/host.c | 22 +- >> 28 files changed, 10398 insertions(+), 507 deletions(-) >> rename drivers/usb/cdns3/{debug.h => cdns3-debug.h} (100%) >> rename drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} (99%) >> rename drivers/usb/cdns3/{gadget.c => cdns3-gadget.c} (99%) >> rename drivers/usb/cdns3/{gadget.h => cdns3-gadget.h} (100%) >> create mode 100644 drivers/usb/cdns3/cdns3-plat.c >> rename drivers/usb/cdns3/{trace.c => cdns3-trace.c} (89%) >> rename drivers/usb/cdns3/{trace.h => cdns3-trace.h} (99%) >> create mode 100644 drivers/usb/cdns3/cdnsp-debug.h >> create mode 100644 drivers/usb/cdns3/cdnsp-ep0.c >> create mode 100644 drivers/usb/cdns3/cdnsp-gadget.c >> create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h >> create mode 100644 drivers/usb/cdns3/cdnsp-mem.c >> create mode 100644 drivers/usb/cdns3/cdnsp-pci.c >> create mode 100644 drivers/usb/cdns3/cdnsp-ring.c >> create mode 100644 drivers/usb/cdns3/cdnsp-trace.c >> create mode 100644 drivers/usb/cdns3/cdnsp-trace.h >> >> -- >> 2.17.1 >> -- Thanks Pawel
On 24/11/20 2:51 PM, Pawel Laszczak wrote: > Peter, > >> On 20-11-19 15:12:57, Pawel Laszczak wrote: >>> This patch introduce new Cadence USBSS DRD driver to linux kernel. >>> >>> The Cadence USBSS DRD Controller is a highly configurable IP Core which >>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and >>> Host Only (XHCI)configurations. >>> >>> The current driver has been validated with FPGA burned. We have support >>> for PCIe bus, which is used on FPGA prototyping. >>> >>> The host side of USBSS-DRD controller is compliance with XHCI >>> specification, so it works with standard XHCI Linux driver. >>> >>> The device side of USBSS DRD controller is compliant with XHCI. >>> The architecture for device side is almost the same as for host side, >>> and most of the XHCI specification can be used to understand how >>> this controller operates. >>> >>> This controller and driver support Full Speed, Hight Speed, Supper Speed >>> and Supper Speed Plus USB protocol. >>> >>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. >>> The last letter of this acronym means PLUS. The formal name of controller >>> is USBSSP but it's to generic so I've decided to use CDNSP. >>> >>> The patch 1: adds support for DRD CDNSP. >>> The patch 2: separates common code that can be reusable by cdnsp driver. >>> The patch 3: moves reusable code to separate module. >>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns. >>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible >>> use it in both drivers. >>> The patches 6-8: add the main part of driver and has been intentionally >>> split into 3 part. In my opinion such division should not >>> affect understanding and reviewing the driver, and cause that >>> main patch (7/8) is little smaller. Patch 6 introduces main >>> header file for driver, 7 is the main part that implements all >>> functionality of driver and 8 introduces tracepoints. >>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. >>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. >>> >>> Changlog from v2: >>> - removed not used pdev parameter from cdnsp_read/wite_64 functions >>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) >>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro >>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file >>> - fixed some typos >>> - some other less important changes suggested by Peter Chen >> >> Hi Pawel, >> >> I have updated my -next tree as the latest usb-next tree which v5.10-rc4 >> is included, would you please rebase my tree and send again, I could apply your >> patches and test, if test could pass, I will apply it to my -next tree. >> You don't need to rebase again since it is a huge patch set, will take some >> efforts for rebase. >> > > I'll try to post it tomorrow. Pawel, have you tested TI J7 for regressions after this series? After your latest changes, can you post a tree which someone in TI can test? Thanks, Sekhar
Sekhar, > > >On 24/11/20 2:51 PM, Pawel Laszczak wrote: >> Peter, >> >>> On 20-11-19 15:12:57, Pawel Laszczak wrote: >>>> This patch introduce new Cadence USBSS DRD driver to linux kernel. >>>> >>>> The Cadence USBSS DRD Controller is a highly configurable IP Core which >>>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and >>>> Host Only (XHCI)configurations. >>>> >>>> The current driver has been validated with FPGA burned. We have support >>>> for PCIe bus, which is used on FPGA prototyping. >>>> >>>> The host side of USBSS-DRD controller is compliance with XHCI >>>> specification, so it works with standard XHCI Linux driver. >>>> >>>> The device side of USBSS DRD controller is compliant with XHCI. >>>> The architecture for device side is almost the same as for host side, >>>> and most of the XHCI specification can be used to understand how >>>> this controller operates. >>>> >>>> This controller and driver support Full Speed, Hight Speed, Supper Speed >>>> and Supper Speed Plus USB protocol. >>>> >>>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. >>>> The last letter of this acronym means PLUS. The formal name of controller >>>> is USBSSP but it's to generic so I've decided to use CDNSP. >>>> >>>> The patch 1: adds support for DRD CDNSP. >>>> The patch 2: separates common code that can be reusable by cdnsp driver. >>>> The patch 3: moves reusable code to separate module. >>>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns. >>>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible >>>> use it in both drivers. >>>> The patches 6-8: add the main part of driver and has been intentionally >>>> split into 3 part. In my opinion such division should not >>>> affect understanding and reviewing the driver, and cause that >>>> main patch (7/8) is little smaller. Patch 6 introduces main >>>> header file for driver, 7 is the main part that implements all >>>> functionality of driver and 8 introduces tracepoints. >>>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. >>>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. >>>> >>>> Changlog from v2: >>>> - removed not used pdev parameter from cdnsp_read/wite_64 functions >>>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) >>>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro >>>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file >>>> - fixed some typos >>>> - some other less important changes suggested by Peter Chen >>> >>> Hi Pawel, >>> >>> I have updated my -next tree as the latest usb-next tree which v5.10-rc4 >>> is included, would you please rebase my tree and send again, I could apply your >>> patches and test, if test could pass, I will apply it to my -next tree. >>> You don't need to rebase again since it is a huge patch set, will take some >>> efforts for rebase. >>> >> >> I'll try to post it tomorrow. > >Pawel, have you tested TI J7 for regressions after this series? After >your latest changes, can you post a tree which someone in TI can test? No I haven't test it on J7. For testing I'm using PCIe based platform for both cnds3 and cdnsp driver. Why you can't use the latest kernel version and current series ? -- Thanks Pawel
On 20-11-19 15:13:07, Pawel Laszczak wrote: > Patch adds entry for USBSSP (CDNSP) driver into MAINTARNERS file. > > Signed-off-by: Pawel Laszczak <pawell@cadence.com> > --- > MAINTAINERS | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 842fef329119..70c31fd2cd61 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3867,6 +3867,14 @@ S: Maintained > T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git > F: Documentation/devicetree/bindings/usb/cdns,usb3.yaml > F: drivers/usb/cdns3/ > +X: drivers/usb/cdns3/cdnsp* > + > +CADENCE USBSSP DRD IP DRIVER > +M: Pawel Laszczak <pawell@cadence.com> > +L: linux-usb@vger.kernel.org > +S: Maintained > +F: drivers/usb/cdns3/ > +X: drivers/usb/cdns3/cdns3* > Hi Pawel, You may add "T" for which tree for cdns3 ssp driver. -- Thanks, Peter Chen
Peter, > >On 20-11-19 15:13:07, Pawel Laszczak wrote: >> Patch adds entry for USBSSP (CDNSP) driver into MAINTARNERS file. >> >> Signed-off-by: Pawel Laszczak <pawell@cadence.com> >> --- >> MAINTAINERS | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 842fef329119..70c31fd2cd61 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -3867,6 +3867,14 @@ S: Maintained >> T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git >> F: Documentation/devicetree/bindings/usb/cdns,usb3.yaml >> F: drivers/usb/cdns3/ >> +X: drivers/usb/cdns3/cdnsp* >> + >> +CADENCE USBSSP DRD IP DRIVER >> +M: Pawel Laszczak <pawell@cadence.com> >> +L: linux-usb@vger.kernel.org >> +S: Maintained >> +F: drivers/usb/cdns3/ >> +X: drivers/usb/cdns3/cdns3* >> > >Hi Pawel, > >You may add "T" for which tree for cdns3 ssp driver. It make sense. I will do it. -- Thanks, Pawel
Peter, > >>On 20-11-19 15:12:57, Pawel Laszczak wrote: >>> This patch introduce new Cadence USBSS DRD driver to linux kernel. >>> >>> The Cadence USBSS DRD Controller is a highly configurable IP Core which >>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and >>> Host Only (XHCI)configurations. >>> >>> The current driver has been validated with FPGA burned. We have support >>> for PCIe bus, which is used on FPGA prototyping. >>> >>> The host side of USBSS-DRD controller is compliance with XHCI >>> specification, so it works with standard XHCI Linux driver. >>> >>> The device side of USBSS DRD controller is compliant with XHCI. >>> The architecture for device side is almost the same as for host side, >>> and most of the XHCI specification can be used to understand how >>> this controller operates. >>> >>> This controller and driver support Full Speed, Hight Speed, Supper Speed >>> and Supper Speed Plus USB protocol. >>> >>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. >>> The last letter of this acronym means PLUS. The formal name of controller >>> is USBSSP but it's to generic so I've decided to use CDNSP. >>> >>> The patch 1: adds support for DRD CDNSP. >>> The patch 2: separates common code that can be reusable by cdnsp driver. >>> The patch 3: moves reusable code to separate module. >>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns. >>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible >>> use it in both drivers. >>> The patches 6-8: add the main part of driver and has been intentionally >>> split into 3 part. In my opinion such division should not >>> affect understanding and reviewing the driver, and cause that >>> main patch (7/8) is little smaller. Patch 6 introduces main >>> header file for driver, 7 is the main part that implements all >>> functionality of driver and 8 introduces tracepoints. >>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. >>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. >>> >>> Changlog from v2: >>> - removed not used pdev parameter from cdnsp_read/wite_64 functions >>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) >>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro >>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file >>> - fixed some typos >>> - some other less important changes suggested by Peter Chen >> >>Hi Pawel, >> >>I have updated my -next tree as the latest usb-next tree which v5.10-rc4 >>is included, would you please rebase my tree and send again, I could apply your >>patches and test, if test could pass, I will apply it to my -next tree. >>You don't need to rebase again since it is a huge patch set, will take some >>efforts for rebase. >> > >I'll try to post it tomorrow. Can I send the new version CDNSP or I should wait for completion 'Re: [PATCH] Revert "usb: cdns3: core: quit if it uses role switch class"' and applying the appropriate fix to your repo ? <snip> Thanks Pawel
> >>> > >>> The device side of USBSS DRD controller is compliant with XHCI. > >>> The architecture for device side is almost the same as for host > >>> side, and most of the XHCI specification can be used to understand > >>> how this controller operates. > >>> > >>> This controller and driver support Full Speed, Hight Speed, Supper > >>> Speed and Supper Speed Plus USB protocol. > >>> > >>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. > >>> The last letter of this acronym means PLUS. The formal name of > >>> controller is USBSSP but it's to generic so I've decided to use CDNSP. > >>> > >>> The patch 1: adds support for DRD CDNSP. > >>> The patch 2: separates common code that can be reusable by cdnsp driver. > >>> The patch 3: moves reusable code to separate module. > >>> The patch 4: changes prefixes in reusable code from cdns3 to common > cdns. > >>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible > >>> use it in both drivers. > >>> The patches 6-8: add the main part of driver and has been intentionally > >>> split into 3 part. In my opinion such division should not > >>> affect understanding and reviewing the driver, and cause > that > >>> main patch (7/8) is little smaller. Patch 6 introduces main > >>> header file for driver, 7 is the main part that implements > all > >>> functionality of driver and 8 introduces tracepoints. > >>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. > >>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. > >>> > >>> Changlog from v2: > >>> - removed not used pdev parameter from cdnsp_read/wite_64 functions > >>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) > >>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro > >>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h > >>> file > >>> - fixed some typos > >>> - some other less important changes suggested by Peter Chen > >> > >>Hi Pawel, > >> > >>I have updated my -next tree as the latest usb-next tree which > >>v5.10-rc4 is included, would you please rebase my tree and send again, > >>I could apply your patches and test, if test could pass, I will apply it to my > -next tree. > >>You don't need to rebase again since it is a huge patch set, will take > >>some efforts for rebase. > >> > > > >I'll try to post it tomorrow. > > Can I send the new version CDNSP or I should wait for completion > 'Re: [PATCH] Revert "usb: cdns3: core: quit if it uses role switch class"' and > applying the appropriate fix to your repo ? > Please wait that fix, thanks. Peter
On 24/11/20 3:22 PM, Pawel Laszczak wrote: > Sekhar, > >> >> >> On 24/11/20 2:51 PM, Pawel Laszczak wrote: >>> Peter, >>> >>>> On 20-11-19 15:12:57, Pawel Laszczak wrote: >>>>> This patch introduce new Cadence USBSS DRD driver to linux kernel. >>>>> >>>>> The Cadence USBSS DRD Controller is a highly configurable IP Core which >>>>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and >>>>> Host Only (XHCI)configurations. >>>>> >>>>> The current driver has been validated with FPGA burned. We have support >>>>> for PCIe bus, which is used on FPGA prototyping. >>>>> >>>>> The host side of USBSS-DRD controller is compliance with XHCI >>>>> specification, so it works with standard XHCI Linux driver. >>>>> >>>>> The device side of USBSS DRD controller is compliant with XHCI. >>>>> The architecture for device side is almost the same as for host side, >>>>> and most of the XHCI specification can be used to understand how >>>>> this controller operates. >>>>> >>>>> This controller and driver support Full Speed, Hight Speed, Supper Speed >>>>> and Supper Speed Plus USB protocol. >>>>> >>>>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. >>>>> The last letter of this acronym means PLUS. The formal name of controller >>>>> is USBSSP but it's to generic so I've decided to use CDNSP. >>>>> >>>>> The patch 1: adds support for DRD CDNSP. >>>>> The patch 2: separates common code that can be reusable by cdnsp driver. >>>>> The patch 3: moves reusable code to separate module. >>>>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns. >>>>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible >>>>> use it in both drivers. >>>>> The patches 6-8: add the main part of driver and has been intentionally >>>>> split into 3 part. In my opinion such division should not >>>>> affect understanding and reviewing the driver, and cause that >>>>> main patch (7/8) is little smaller. Patch 6 introduces main >>>>> header file for driver, 7 is the main part that implements all >>>>> functionality of driver and 8 introduces tracepoints. >>>>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver. >>>>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. >>>>> >>>>> Changlog from v2: >>>>> - removed not used pdev parameter from cdnsp_read/wite_64 functions >>>>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) >>>>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro >>>>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file >>>>> - fixed some typos >>>>> - some other less important changes suggested by Peter Chen >>>> >>>> Hi Pawel, >>>> >>>> I have updated my -next tree as the latest usb-next tree which v5.10-rc4 >>>> is included, would you please rebase my tree and send again, I could apply your >>>> patches and test, if test could pass, I will apply it to my -next tree. >>>> You don't need to rebase again since it is a huge patch set, will take some >>>> efforts for rebase. >>>> >>> >>> I'll try to post it tomorrow. >> >> Pawel, have you tested TI J7 for regressions after this series? After >> your latest changes, can you post a tree which someone in TI can test? > > No I haven't test it on J7. For testing I'm using PCIe based platform for > both cnds3 and cdnsp driver. Do you have access to J7 EVM? Are you willing to test it there to make sure nothing broke? > > Why you can't use the latest kernel version and current series ? Sure. Let me try that. Looking at some other traffic on this thread, I was not sure where this applies. So, this applies to latest of Linus's tree? I re-read the cover letter but cannot find this information. Thanks, Sekhar
This patch introduce new Cadence USBSS DRD driver to linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA burned. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliance with XHCI specification, so it works with standard XHCI Linux driver. The device side of USBSS DRD controller is compliant with XHCI. The architecture for device side is almost the same as for host side, and most of the XHCI specification can be used to understand how this controller operates. This controller and driver support Full Speed, Hight Speed, Supper Speed and Supper Speed Plus USB protocol. The prefix cdnsp used in driver has chosen by analogy to cdn3 driver. The last letter of this acronym means PLUS. The formal name of controller is USBSSP but it's to generic so I've decided to use CDNSP. The patch 1: adds support for DRD CDNSP. The patch 2: separates common code that can be reusable by cdnsp driver. The patch 3: moves reusable code to separate module. The patch 4: changes prefixes in reusable code from cdns3 to common cdns. The patch 5: adopts gadget_dev pointer in cdns structure to make possible use it in both drivers. The patches 6-8: add the main part of driver and has been intentionally split into 3 part. In my opinion such division should not affect understanding and reviewing the driver, and cause that main patch (7/8) is little smaller. Patch 6 introduces main header file for driver, 7 is the main part that implements all functionality of driver and 8 introduces tracepoints. The patch 9: Adds cdns3 prefixes to files related with USBSS driver. the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file. Changlog from v2: - removed not used pdev parameter from cdnsp_read/wite_64 functions - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31) - replaced some constant value with CDNSP_ENDPOINTS_NUM macro - replaced 'true' with '1' in bits description in cdnsp-gadget.h file - fixed some typos - some other less important changes suggested by Peter Chen Changlog from v1: - updated common code to latest cdns3 driver - moved cdnsp driver files to cdns3 as sugested by Peter Chan - removed duplicate code from cdnsp_ep0_set_config function - added cdns3 prefixes to file related with USBSS driver - updated MAINTAINERS file - fixed issue with U1 - fixed issue with L1 - some less improtant changes sugested by Chunfeng Yun --- Pawel Laszczak (10): usb: cdns3: Add support for DRD CDNSP usb: cdns3: Split core.c into cdns3-plat and core.c file usb: cdns3: Moves reusable code to separate module usb: cdns3: Refactoring names in reusable code usb: cdns3: Changed type of gadget_dev in cdns structure usb: cdnsp: Device side header file for CDNSP driver usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver usb: cdnsp: Add tracepoints for CDNSP driver usb: cdns3: Change file names for cdns3 driver. MAINTAINERS: add Cadence USBSSP DRD IP driver entry MAINTAINERS | 8 + drivers/usb/Makefile | 2 + drivers/usb/cdns3/Kconfig | 61 +- drivers/usb/cdns3/Makefile | 30 +- drivers/usb/cdns3/{debug.h => cdns3-debug.h} | 0 drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} | 4 +- .../usb/cdns3/{gadget.c => cdns3-gadget.c} | 28 +- .../usb/cdns3/{gadget.h => cdns3-gadget.h} | 0 drivers/usb/cdns3/cdns3-imx.c | 2 +- drivers/usb/cdns3/cdns3-plat.c | 315 +++ drivers/usb/cdns3/{trace.c => cdns3-trace.c} | 2 +- drivers/usb/cdns3/{trace.h => cdns3-trace.h} | 6 +- drivers/usb/cdns3/cdnsp-debug.h | 583 ++++ drivers/usb/cdns3/cdnsp-ep0.c | 495 ++++ drivers/usb/cdns3/cdnsp-gadget.c | 2017 ++++++++++++++ drivers/usb/cdns3/cdnsp-gadget.h | 1600 +++++++++++ drivers/usb/cdns3/cdnsp-mem.c | 1325 +++++++++ drivers/usb/cdns3/cdnsp-pci.c | 255 ++ drivers/usb/cdns3/cdnsp-ring.c | 2439 +++++++++++++++++ drivers/usb/cdns3/cdnsp-trace.c | 12 + drivers/usb/cdns3/cdnsp-trace.h | 840 ++++++ drivers/usb/cdns3/core.c | 454 +-- drivers/usb/cdns3/core.h | 54 +- drivers/usb/cdns3/drd.c | 222 +- drivers/usb/cdns3/drd.h | 94 +- drivers/usb/cdns3/gadget-export.h | 22 +- drivers/usb/cdns3/host-export.h | 13 +- drivers/usb/cdns3/host.c | 22 +- 28 files changed, 10398 insertions(+), 507 deletions(-) rename drivers/usb/cdns3/{debug.h => cdns3-debug.h} (100%) rename drivers/usb/cdns3/{ep0.c => cdns3-ep0.c} (99%) rename drivers/usb/cdns3/{gadget.c => cdns3-gadget.c} (99%) rename drivers/usb/cdns3/{gadget.h => cdns3-gadget.h} (100%) create mode 100644 drivers/usb/cdns3/cdns3-plat.c rename drivers/usb/cdns3/{trace.c => cdns3-trace.c} (89%) rename drivers/usb/cdns3/{trace.h => cdns3-trace.h} (99%) create mode 100644 drivers/usb/cdns3/cdnsp-debug.h create mode 100644 drivers/usb/cdns3/cdnsp-ep0.c create mode 100644 drivers/usb/cdns3/cdnsp-gadget.c create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h create mode 100644 drivers/usb/cdns3/cdnsp-mem.c create mode 100644 drivers/usb/cdns3/cdnsp-pci.c create mode 100644 drivers/usb/cdns3/cdnsp-ring.c create mode 100644 drivers/usb/cdns3/cdnsp-trace.c create mode 100644 drivers/usb/cdns3/cdnsp-trace.h