| Message ID | 20201031184854.745828-41-jic23@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings:iio: yet more txt to yam conversions | expand |
On Sat, 31 Oct 2020 18:48:48 +0000 Jonathan Cameron <jic23@kernel.org> wrote: > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > One question in here is whether we want to constrain the number of > interrupts. Some parts definitely only have 1 such pin, and others > 2 pins but I can not find information on the bma254. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Olkesandr's email address is bouncing so I've listed myself as maintainer for now. Applied. Thanks, Jonathan > --- > .../devicetree/bindings/iio/accel/bma180.txt | 35 ----------- > .../bindings/iio/accel/bosch,bma180.yaml | 62 +++++++++++++++++++ > 2 files changed, 62 insertions(+), 35 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt > deleted file mode 100644 > index 33da4a6fdb39..000000000000 > --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt > +++ /dev/null > @@ -1,35 +0,0 @@ > -* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor > - > -https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf > -http://omapworld.com/BMA180_111_1002839.pdf > -http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf > - > -Required properties: > - > - - compatible : should be one of: > - "bosch,bma023" > - "bosch,bma150" > - "bosch,bma180" > - "bosch,bma250" > - "bosch,bma254" > - "bosch,smb380" > - - reg : the I2C address of the sensor > - - vdd-supply : regulator phandle connected to the VDD pin > - - vddio-supply : regulator phandle connected to the VDDIO pin > - > -Optional properties: > - > - - interrupts : interrupt mapping for GPIO IRQ, it should by configured with > - flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING > - For the bma250 the first interrupt listed must be the one > - connected to the INT1 pin, the second (optional) interrupt > - listed must be the one connected to the INT2 pin. > - > -Example: > - > -bma180@40 { > - compatible = "bosch,bma180"; > - reg = <0x40>; > - interrupt-parent = <&gpio6>; > - interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; > -}; > diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml > new file mode 100644 > index 000000000000..14e48290ffe3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers > + > +maintainers: > + - Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> > + > +description: | > + https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf > + http://omapworld.com/BMA180_111_1002839.pdf > + http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf > + > +properties: > + compatible: > + enum: > + - bosch,bma023 > + - bosch,bma150 > + - bosch,bma180 > + - bosch,bma250 > + - bosch,bma254 > + - bosch,smb380 > + > + reg: > + maxItems: 1 > + > + vdd-supply: true > + > + vddio-supply: true > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + description: | > + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. > + For the bma250 the first interrupt listed must be the one > + connected to the INT1 pin, the second (optional) interrupt > + listed must be the one connected to the INT2 pin. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + accel@40 { > + compatible = "bosch,bma180"; > + reg = <0x40>; > + interrupt-parent = <&gpio6>; > + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; > + }; > + }; > +...
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt deleted file mode 100644 index 33da4a6fdb39..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor - -https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf -http://omapworld.com/BMA180_111_1002839.pdf -http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf - -Required properties: - - - compatible : should be one of: - "bosch,bma023" - "bosch,bma150" - "bosch,bma180" - "bosch,bma250" - "bosch,bma254" - "bosch,smb380" - - reg : the I2C address of the sensor - - vdd-supply : regulator phandle connected to the VDD pin - - vddio-supply : regulator phandle connected to the VDDIO pin - -Optional properties: - - - interrupts : interrupt mapping for GPIO IRQ, it should by configured with - flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING - For the bma250 the first interrupt listed must be the one - connected to the INT1 pin, the second (optional) interrupt - listed must be the one connected to the INT2 pin. - -Example: - -bma180@40 { - compatible = "bosch,bma180"; - reg = <0x40>; - interrupt-parent = <&gpio6>; - interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; -}; diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml new file mode 100644 index 000000000000..14e48290ffe3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers + +maintainers: + - Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> + +description: | + https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf + http://omapworld.com/BMA180_111_1002839.pdf + http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf + +properties: + compatible: + enum: + - bosch,bma023 + - bosch,bma150 + - bosch,bma180 + - bosch,bma250 + - bosch,bma254 + - bosch,smb380 + + reg: + maxItems: 1 + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + description: | + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + For the bma250 the first interrupt listed must be the one + connected to the INT1 pin, the second (optional) interrupt + listed must be the one connected to the INT2 pin. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accel@40 { + compatible = "bosch,bma180"; + reg = <0x40>; + interrupt-parent = <&gpio6>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + }; + }; +...