| Message ID | 1394712342-15778-394-Taiwan-albertk@realtek.com |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next,v2] r8153_ecm: avoid to be prior to r8152 driver | expand |
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Wed, 18 Nov 2020 14:43:58 +0800 you wrote: > Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled > as modules. Otherwise, the r8153_ecm would be used, even though the > device is supported by r8152 driver. > > Fixes: c1aedf015ebd ("net/usb/r8153_ecm: support ECM mode for RTL8153") > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Hayes Wang <hayeswang@realtek.com> > > [...] Here is the summary with links: - [net-next,v2] r8153_ecm: avoid to be prior to r8152 driver https://git.kernel.org/netdev/net-next/c/657bc1d10bfc You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index b46993d5f997..1e3719028780 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -628,4 +628,13 @@ config USB_NET_AQC111 This driver should work with at least the following devices: * Aquantia AQtion USB to 5GbE +config USB_RTL8153_ECM + tristate "RTL8153 ECM support" + depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n) + default y + help + This option supports ECM mode for RTL8153 ethernet adapter, when + CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not + supported by r8152 driver. + endif # USB_NET_DRIVERS diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 99381e6bea78..4964f7b326fb 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SR9700) += sr9700.o @@ -41,3 +41,4 @@ obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o obj-$(CONFIG_USB_NET_CH9200) += ch9200.o obj-$(CONFIG_USB_NET_AQC111) += aqc111.o +obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o
Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled as modules. Otherwise, the r8153_ecm would be used, even though the device is supported by r8152 driver. Fixes: c1aedf015ebd ("net/usb/r8153_ecm: support ECM mode for RTL8153") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- v2: Use a separate Kconfig entry for r8153_ecm with proper dependencies. drivers/net/usb/Kconfig | 9 +++++++++ drivers/net/usb/Makefile | 3 ++- 2 files changed, 11 insertions(+), 1 deletion(-)