| Message ID | 20200912143052.30952-1-m.cerveny@computer.org |
|---|---|
| Headers | show |
| Series | ARM: dts: sun8i: v3s: Enable video decoder | expand |
On Sat, 12 Sep 2020 16:30:48 +0200, Martin Cerveny wrote: > Allwinner V3s has system control similar to that in H3. > Add compatibles for system control with SRAM C1 region. > > Signed-off-by: Martin Cerveny <m.cerveny@computer.org> > --- > .../bindings/sram/allwinner,sun4i-a10-system-control.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > Acked-by: Rob Herring <robh@kernel.org>
Maxime, Are you OK with this series? It looks good to me. Regards, Hans On 12/09/2020 16:30, Martin Cerveny wrote: > First patch extends cedrus capability to all decoders > because V3s missing MPEG2 decoder. > > Next two patches add system control node (SRAM C1) and > next three patches add support for Cedrus VPU. > > Tested on "Lichee Zero" V3s platform with testing LCD patch > ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) > and V4L2 raw API testing utility > ( https://github.com/mcerveny/v4l2-request-test ): > - enabled LCD (DRM dual VI and sigle UI planes) > - added RGB panel > - enabled PWM > > There is low memory on V3s (64MB) and maximum must be available to CMA: > - CONFIG_CMA_SIZE_MBYTES=28 > - add swap to swapout other processes > - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) > > Only H.264 decoder working - MPEG and H.265 unsupported by V3s, > JPEG/MJPEG still unimplemented, encoder unimplemented > > best regards, > Martin > > Changes since v1: > - patch 0005 rename > - added testing description > > Martin Cerveny (6): > media: cedrus: Register all codecs as capability > dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s > compatibles > ARM: dts: sun8i: v3s: Add node for system control > media: cedrus: Add support for V3s > dt-bindings: media: cedrus: Add V3s compatible > ARM: dts: sun8i: v3s: Add video engine node > > .../allwinner,sun4i-a10-video-engine.yaml | 1 + > .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ > arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ > drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- > drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ > .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ > 6 files changed, 71 insertions(+), 1 deletion(-) >
Hi! On Fri, Oct 30, 2020 at 12:06:10PM +0100, Hans Verkuil wrote: > Maxime, > > Are you OK with this series? It looks good to me. I am, you can take it. I'll merge the dt patches through arm-soc Thanks! Maxime
Hi Martin, On 12/09/2020 16:30, Martin Cerveny wrote: > First patch extends cedrus capability to all decoders > because V3s missing MPEG2 decoder. > > Next two patches add system control node (SRAM C1) and > next three patches add support for Cedrus VPU. > > Tested on "Lichee Zero" V3s platform with testing LCD patch > ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) > and V4L2 raw API testing utility > ( https://github.com/mcerveny/v4l2-request-test ): > - enabled LCD (DRM dual VI and sigle UI planes) > - added RGB panel > - enabled PWM > > There is low memory on V3s (64MB) and maximum must be available to CMA: > - CONFIG_CMA_SIZE_MBYTES=28 > - add swap to swapout other processes > - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) > > Only H.264 decoder working - MPEG and H.265 unsupported by V3s, > JPEG/MJPEG still unimplemented, encoder unimplemented When I tried to merged these patches I got merge conflicts. Possibly due to other 5.10 changes, but certainly because of conflicts with patches from Jernej: https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-4-jernej.skrabec@siol.net/ https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-5-jernej.skrabec@siol.net/ I've merged Jerne's patches and posted a PR for that: https://patchwork.linuxtv.org/project/linux-media/patch/f3b8e5e2-5f0e-fb6f-e5b2-7f44f7e365e7@xs4all.nl/ Can you rebase your patches on top of my branch that contains Jernej's patches? https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.11e Once my PR is merged into the media_tree master I can take your rebased patches. Regards, Hans > > best regards, > Martin > > Changes since v1: > - patch 0005 rename > - added testing description > > Martin Cerveny (6): > media: cedrus: Register all codecs as capability > dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s > compatibles > ARM: dts: sun8i: v3s: Add node for system control > media: cedrus: Add support for V3s > dt-bindings: media: cedrus: Add V3s compatible > ARM: dts: sun8i: v3s: Add video engine node > > .../allwinner,sun4i-a10-video-engine.yaml | 1 + > .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ > arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ > drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- > drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ > .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ > 6 files changed, 71 insertions(+), 1 deletion(-) >
Hello. On Thu, 5 Nov 2020, Hans Verkuil wrote: > Hi Martin, > > On 12/09/2020 16:30, Martin Cerveny wrote: >> First patch extends cedrus capability to all decoders >> because V3s missing MPEG2 decoder. >> >> Next two patches add system control node (SRAM C1) and >> next three patches add support for Cedrus VPU. >> >> Tested on "Lichee Zero" V3s platform with testing LCD patch >> ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) >> and V4L2 raw API testing utility >> ( https://github.com/mcerveny/v4l2-request-test ): >> - enabled LCD (DRM dual VI and sigle UI planes) >> - added RGB panel >> - enabled PWM >> >> There is low memory on V3s (64MB) and maximum must be available to CMA: >> - CONFIG_CMA_SIZE_MBYTES=28 >> - add swap to swapout other processes >> - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) >> >> Only H.264 decoder working - MPEG and H.265 unsupported by V3s, >> JPEG/MJPEG still unimplemented, encoder unimplemented > > When I tried to merged these patches I got merge conflicts. > > Possibly due to other 5.10 changes, but certainly because of conflicts > with patches from Jernej: > > https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-4-jernej.skrabec@siol.net/ > https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-5-jernej.skrabec@siol.net/ > > I've merged Jerne's patches and posted a PR for that: > https://patchwork.linuxtv.org/project/linux-media/patch/f3b8e5e2-5f0e-fb6f-e5b2-7f44f7e365e7@xs4all.nl/ > > Can you rebase your patches on top of my branch that contains Jernej's patches? > > https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.11e > > Once my PR is merged into the media_tree master I can take your rebased > patches. I updated patches: https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e BUT, commit (555 commits) for v5.10-1 https://github.com/torvalds/linux/commit/fd5c32d80884268a381ed0e67cccef0b3d37750b disrupts usability of Cedrus H.264 (at least for my Allwinner V3s): 1) colors are disrupted There are missing some initialization now. If I use "5.9" compatible code (last bisect good point https://github.com/torvalds/linux/commit/647412daeb454b6dad12a6c6961ab90aac9e5d29 ) then reboot (not power-off!) and use new code ( https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e ) and colors are OK. 2) decoding of complex streams fails ( https://github.com/mcerveny/v4l2-request-test/tree/v5.10 ) - bbb-h264-all-i-32 - OK - bbb-h264-32 - bad from frame 5 - bbb-h264-high-32 - bad from frame 6 best regards, Martin >> Changes since v1: >> - patch 0005 rename >> - added testing description >> >> Martin Cerveny (6): >> media: cedrus: Register all codecs as capability >> dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s >> compatibles >> ARM: dts: sun8i: v3s: Add node for system control >> media: cedrus: Add support for V3s >> dt-bindings: media: cedrus: Add V3s compatible >> ARM: dts: sun8i: v3s: Add video engine node >> >> .../allwinner,sun4i-a10-video-engine.yaml | 1 + >> .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ >> arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ >> drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- >> drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ >> .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ >> 6 files changed, 71 insertions(+), 1 deletion(-) >> >
On 15/11/2020 19:59, Martin Cerveny wrote: > Hello. > > On Thu, 5 Nov 2020, Hans Verkuil wrote: > >> Hi Martin, >> >> On 12/09/2020 16:30, Martin Cerveny wrote: >>> First patch extends cedrus capability to all decoders >>> because V3s missing MPEG2 decoder. >>> >>> Next two patches add system control node (SRAM C1) and >>> next three patches add support for Cedrus VPU. >>> >>> Tested on "Lichee Zero" V3s platform with testing LCD patch >>> ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) >>> and V4L2 raw API testing utility >>> ( https://github.com/mcerveny/v4l2-request-test ): >>> - enabled LCD (DRM dual VI and sigle UI planes) >>> - added RGB panel >>> - enabled PWM >>> >>> There is low memory on V3s (64MB) and maximum must be available to CMA: >>> - CONFIG_CMA_SIZE_MBYTES=28 >>> - add swap to swapout other processes >>> - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) >>> >>> Only H.264 decoder working - MPEG and H.265 unsupported by V3s, >>> JPEG/MJPEG still unimplemented, encoder unimplemented >> >> When I tried to merged these patches I got merge conflicts. >> >> Possibly due to other 5.10 changes, but certainly because of conflicts >> with patches from Jernej: >> >> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-4-jernej.skrabec@siol.net/ >> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-5-jernej.skrabec@siol.net/ >> >> I've merged Jerne's patches and posted a PR for that: >> https://patchwork.linuxtv.org/project/linux-media/patch/f3b8e5e2-5f0e-fb6f-e5b2-7f44f7e365e7@xs4all.nl/ >> >> Can you rebase your patches on top of my branch that contains Jernej's patches? >> >> https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.11e >> >> Once my PR is merged into the media_tree master I can take your rebased >> patches. > > I updated patches: > https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e > > BUT, commit (555 commits) for v5.10-1 > https://github.com/torvalds/linux/commit/fd5c32d80884268a381ed0e67cccef0b3d37750b > disrupts usability of Cedrus H.264 (at least for my Allwinner V3s): > > 1) colors are disrupted > > There are missing some initialization now. > > If I use "5.9" compatible code > (last bisect good point https://github.com/torvalds/linux/commit/647412daeb454b6dad12a6c6961ab90aac9e5d29 ) > then reboot (not power-off!) and use new code > ( https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e ) > and colors are OK. Could this or the next issue be related to this bug fix? https://git.linuxtv.org/media_tree.git/commit/?h=fixes&id=9ac924b98728c3733c91c6c59fc410827d0da49f That fix isn't yet in our master tree. > > 2) decoding of complex streams fails > > ( https://github.com/mcerveny/v4l2-request-test/tree/v5.10 ) > - bbb-h264-all-i-32 - OK > - bbb-h264-32 - bad from frame 5 > - bbb-h264-high-32 - bad from frame 6 I think cedrus devs need to take a look at these issues. Regards, Hans > > best regards, > Martin > >>> Changes since v1: >>> - patch 0005 rename >>> - added testing description >>> >>> Martin Cerveny (6): >>> media: cedrus: Register all codecs as capability >>> dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s >>> compatibles >>> ARM: dts: sun8i: v3s: Add node for system control >>> media: cedrus: Add support for V3s >>> dt-bindings: media: cedrus: Add V3s compatible >>> ARM: dts: sun8i: v3s: Add video engine node >>> >>> .../allwinner,sun4i-a10-video-engine.yaml | 1 + >>> .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ >>> arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ >>> drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- >>> drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ >>> .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ >>> 6 files changed, 71 insertions(+), 1 deletion(-) >>> >>
On Mon, 16 Nov 2020, Hans Verkuil wrote: > On 15/11/2020 19:59, Martin Cerveny wrote: >> Hello. >> >> On Thu, 5 Nov 2020, Hans Verkuil wrote: >> >>> Hi Martin, >>> >>> On 12/09/2020 16:30, Martin Cerveny wrote: >>>> First patch extends cedrus capability to all decoders >>>> because V3s missing MPEG2 decoder. >>>> >>>> Next two patches add system control node (SRAM C1) and >>>> next three patches add support for Cedrus VPU. >>>> >>>> Tested on "Lichee Zero" V3s platform with testing LCD patch >>>> ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) >>>> and V4L2 raw API testing utility >>>> ( https://github.com/mcerveny/v4l2-request-test ): >>>> - enabled LCD (DRM dual VI and sigle UI planes) >>>> - added RGB panel >>>> - enabled PWM >>>> >>>> There is low memory on V3s (64MB) and maximum must be available to CMA: >>>> - CONFIG_CMA_SIZE_MBYTES=28 >>>> - add swap to swapout other processes >>>> - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) >>>> >>>> Only H.264 decoder working - MPEG and H.265 unsupported by V3s, >>>> JPEG/MJPEG still unimplemented, encoder unimplemented >>> >>> When I tried to merged these patches I got merge conflicts. >>> >>> Possibly due to other 5.10 changes, but certainly because of conflicts >>> with patches from Jernej: >>> >>> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-4-jernej.skrabec@siol.net/ >>> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-5-jernej.skrabec@siol.net/ >>> >>> I've merged Jerne's patches and posted a PR for that: >>> https://patchwork.linuxtv.org/project/linux-media/patch/f3b8e5e2-5f0e-fb6f-e5b2-7f44f7e365e7@xs4all.nl/ >>> >>> Can you rebase your patches on top of my branch that contains Jernej's patches? >>> >>> https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.11e >>> >>> Once my PR is merged into the media_tree master I can take your rebased >>> patches. >> >> I updated patches: >> https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e >> >> BUT, commit (555 commits) for v5.10-1 >> https://github.com/torvalds/linux/commit/fd5c32d80884268a381ed0e67cccef0b3d37750b >> disrupts usability of Cedrus H.264 (at least for my Allwinner V3s): >> >> 1) colors are disrupted >> >> There are missing some initialization now. >> >> If I use "5.9" compatible code >> (last bisect good point https://github.com/torvalds/linux/commit/647412daeb454b6dad12a6c6961ab90aac9e5d29 ) >> then reboot (not power-off!) and use new code >> ( https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e ) >> and colors are OK. > > Could this or the next issue be related to this bug fix? > > https://git.linuxtv.org/media_tree.git/commit/?h=fixes&id=9ac924b98728c3733c91c6c59fc410827d0da49f > > That fix isn't yet in our master tree. Confirmed. It recovers colors ! >> >> 2) decoding of complex streams fails >> >> ( https://github.com/mcerveny/v4l2-request-test/tree/v5.10 ) >> - bbb-h264-all-i-32 - OK >> - bbb-h264-32 - bad from frame 5 >> - bbb-h264-high-32 - bad from frame 6 > > I think cedrus devs need to take a look at these issues. Maybe something wrong in my testing code, problematic commit swapped some variables between structures :-( I try to investigate more, regards Martin > Regards, > > Hans > >> >> best regards, >> Martin >> >>>> Changes since v1: >>>> - patch 0005 rename >>>> - added testing description >>>> >>>> Martin Cerveny (6): >>>> media: cedrus: Register all codecs as capability >>>> dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s >>>> compatibles >>>> ARM: dts: sun8i: v3s: Add node for system control >>>> media: cedrus: Add support for V3s >>>> dt-bindings: media: cedrus: Add V3s compatible >>>> ARM: dts: sun8i: v3s: Add video engine node >>>> >>>> .../allwinner,sun4i-a10-video-engine.yaml | 1 + >>>> .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ >>>> arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ >>>> drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- >>>> drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ >>>> .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ >>>> 6 files changed, 71 insertions(+), 1 deletion(-) >>>> >>> >
On 16/11/2020 13:07, Martin Cerveny wrote: > Hello. > > On Mon, 16 Nov 2020, Martin Cerveny wrote: >> On Mon, 16 Nov 2020, Hans Verkuil wrote: >>> On 15/11/2020 19:59, Martin Cerveny wrote: >>>> On Thu, 5 Nov 2020, Hans Verkuil wrote: >>>>> On 12/09/2020 16:30, Martin Cerveny wrote: >>>>>> First patch extends cedrus capability to all decoders >>>>>> because V3s missing MPEG2 decoder. >>>>>> >>>>>> Next two patches add system control node (SRAM C1) and >>>>>> next three patches add support for Cedrus VPU. >>>>>> >>>>>> Tested on "Lichee Zero" V3s platform with testing LCD patch >>>>>> ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) >>>>>> and V4L2 raw API testing utility >>>>>> ( https://github.com/mcerveny/v4l2-request-test ): >>>>>> - enabled LCD (DRM dual VI and sigle UI planes) >>>>>> - added RGB panel >>>>>> - enabled PWM >>>>>> >>>>>> There is low memory on V3s (64MB) and maximum must be available to CMA: >>>>>> - CONFIG_CMA_SIZE_MBYTES=28 >>>>>> - add swap to swapout other processes >>>>>> - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) >>>>>> >>>>>> Only H.264 decoder working - MPEG and H.265 unsupported by V3s, >>>>>> JPEG/MJPEG still unimplemented, encoder unimplemented >>>>> >>>>> When I tried to merged these patches I got merge conflicts. >>>>> >>>>> Possibly due to other 5.10 changes, but certainly because of conflicts >>>>> with patches from Jernej: >>>>> >>>>> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-4-jernej.skrabec@siol.net/ >>>>> https://patchwork.linuxtv.org/project/linux-media/patch/20200825173523.1289379-5-jernej.skrabec@siol.net/ >>>>> >>>>> I've merged Jerne's patches and posted a PR for that: >>>>> https://patchwork.linuxtv.org/project/linux-media/patch/f3b8e5e2-5f0e-fb6f-e5b2-7f44f7e365e7@xs4all.nl/ >>>>> >>>>> Can you rebase your patches on top of my branch that contains Jernej's >>>>> patches? >>>>> >>>>> https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.11e >>>>> >>>>> Once my PR is merged into the media_tree master I can take your rebased >>>>> patches. >>>> >>>> I updated patches: >>>> https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e >>>> >>>> BUT, commit (555 commits) for v5.10-1 >>>> https://github.com/torvalds/linux/commit/fd5c32d80884268a381ed0e67cccef0b3d37750b >>>> disrupts usability of Cedrus H.264 (at least for my Allwinner V3s): >>>> >>>> 1) colors are disrupted >>>> >>>> There are missing some initialization now. >>>> >>>> If I use "5.9" compatible code >>>> (last bisect good point >>>> https://github.com/torvalds/linux/commit/647412daeb454b6dad12a6c6961ab90aac9e5d29 >>>> ) >>>> then reboot (not power-off!) and use new code >>>> ( https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e ) >>>> and colors are OK. >>> >>> Could this or the next issue be related to this bug fix? >>> >>> https://git.linuxtv.org/media_tree.git/commit/?h=fixes&id=9ac924b98728c3733c91c6c59fc410827d0da49f >>> >>> That fix isn't yet in our master tree. >> >> Confirmed. It recovers colors ! >> >>>> >>>> 2) decoding of complex streams fails >>>> >>>> ( https://github.com/mcerveny/v4l2-request-test/tree/v5.10 ) >>>> - bbb-h264-all-i-32 - OK >>>> - bbb-h264-32 - bad from frame 5 >>>> - bbb-h264-high-32 - bad from frame 6 >>> >>> I think cedrus devs need to take a look at these issues. >> >> Maybe something wrong in my testing code, >> problematic commit swapped some variables between structures :-( >> >> I try to investigate more, regards Martin > > Yes. I found new format in ref_pic_list. > I updated test application. All H.264 tests are working now. > > https://github.com/mcerveny/v4l2-request-test > > Is it necessary to release new "Patch V3" (rebased) series from > https://github.com/mcerveny/linux/tree/media_tree_for-v5.11e or not ? Yes, please! That would be much appreciated. Regards, Hans > > Regards, Martin > >>> Regards, >>> >>> Hans >>> >>>> >>>> best regards, >>>> Martin >>>> >>>>>> Changes since v1: >>>>>> - patch 0005 rename >>>>>> - added testing description >>>>>> >>>>>> Martin Cerveny (6): >>>>>> media: cedrus: Register all codecs as capability >>>>>> dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s >>>>>> compatibles >>>>>> ARM: dts: sun8i: v3s: Add node for system control >>>>>> media: cedrus: Add support for V3s >>>>>> dt-bindings: media: cedrus: Add V3s compatible >>>>>> ARM: dts: sun8i: v3s: Add video engine node >>>>>> >>>>>> .../allwinner,sun4i-a10-video-engine.yaml | 1 + >>>>>> .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ >>>>>> arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ >>>>>> drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- >>>>>> drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ >>>>>> .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ >>>>>> 6 files changed, 71 insertions(+), 1 deletion(-) >>>>>> >>>>> >>> >>
First patch extends cedrus capability to all decoders because V3s missing MPEG2 decoder. Next two patches add system control node (SRAM C1) and next three patches add support for Cedrus VPU. Tested on "Lichee Zero" V3s platform with testing LCD patch ( https://github.com/mcerveny/linux/tree/v3s_videocodec_v4 ) and V4L2 raw API testing utility ( https://github.com/mcerveny/v4l2-request-test ): - enabled LCD (DRM dual VI and sigle UI planes) - added RGB panel - enabled PWM There is low memory on V3s (64MB) and maximum must be available to CMA: - CONFIG_CMA_SIZE_MBYTES=28 - add swap to swapout other processes - decrease buffers in v4l2-request-test (.buffers_count from 16 to 6) Only H.264 decoder working - MPEG and H.265 unsupported by V3s, JPEG/MJPEG still unimplemented, encoder unimplemented best regards, Martin Changes since v1: - patch 0005 rename - added testing description Martin Cerveny (6): media: cedrus: Register all codecs as capability dt-bindings: sram: allwinner,sun4i-a10-system-control: Add V3s compatibles ARM: dts: sun8i: v3s: Add node for system control media: cedrus: Add support for V3s dt-bindings: media: cedrus: Add V3s compatible ARM: dts: sun8i: v3s: Add video engine node .../allwinner,sun4i-a10-video-engine.yaml | 1 + .../allwinner,sun4i-a10-system-control.yaml | 6 ++++ arch/arm/boot/dts/sun8i-v3s.dtsi | 33 +++++++++++++++++++ drivers/staging/media/sunxi/cedrus/cedrus.c | 28 +++++++++++++++- drivers/staging/media/sunxi/cedrus/cedrus.h | 2 ++ .../staging/media/sunxi/cedrus/cedrus_video.c | 2 ++ 6 files changed, 71 insertions(+), 1 deletion(-)