@@ -232,6 +232,17 @@ config PWM_IMX_TPM
To compile this driver as a module, choose M here: the module
will be called pwm-imx-tpm.
+config PWM_INTEL_LGM
+ tristate "Intel LGM PWM support"
+ depends on HAS_IOMEM
+ depends on (OF && X86) || COMPILE_TEST
+ select REGMAP_MMIO
+ help
+ Generic PWM fan controller driver for LGM SoC.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-intel-lgm.
+
config PWM_IQS620A
tristate "Azoteq IQS620A PWM support"
depends on MFD_IQS62X || COMPILE_TEST
@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG) += pwm-img.o
obj-$(CONFIG_PWM_IMX1) += pwm-imx1.o
obj-$(CONFIG_PWM_IMX27) += pwm-imx27.o
obj-$(CONFIG_PWM_IMX_TPM) += pwm-imx-tpm.o
+obj-$(CONFIG_PWM_INTEL_LGM) += pwm-intel-lgm.o
obj-$(CONFIG_PWM_IQS620A) += pwm-iqs620a.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
new file mode 100644
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Limitations:
+ * - The hardware supports fixed period & configures only 2-wire mode.
+ * - Supports normal polarity. Does not support changing polarity.
+ * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
+ * keep track of running period.
+ * - When duty cycle is changed, PWM output may be a mix of previous setting
+ * and new setting for the first period. From second period, the output is
+ * based on new setting.
+ * - It is a dedicated PWM fan controller. There are no other consumers for
+ * this PWM controller.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define LGM_PWM_FAN_CON0 0x0
+#define LGM_PWM_FAN_EN_EN BIT(0)
+#define LGM_PWM_FAN_EN_DIS 0x0
+#define LGM_PWM_FAN_EN_MSK BIT(0)
+#define LGM_PWM_FAN_MODE_2WIRE 0x0
+#define LGM_PWM_FAN_MODE_MSK BIT(1)
+#define LGM_PWM_FAN_DC_MSK GENMASK(23, 16)
+
+#define LGM_PWM_FAN_CON1 0x4
+#define LGM_PWM_FAN_MAX_RPM_MSK GENMASK(15, 0)
+
+#define LGM_PWM_MAX_RPM (BIT(16) - 1)
+#define LGM_PWM_DEFAULT_RPM 4000
+#define LGM_PWM_MAX_DUTY_CYCLE (BIT(8) - 1)
+
+#define LGM_PWM_DC_BITS 8
+
+#define LGM_PWM_PERIOD_2WIRE_NS (40 * NSEC_PER_MSEC)
+
+struct lgm_pwm_chip {
+ struct pwm_chip chip;
+ struct regmap *regmap;
+ u32 period;
+};
+
+static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct lgm_pwm_chip, chip);
+}
+
+static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
+{
+ struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+ struct regmap *regmap = pc->regmap;
+
+ return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
+ enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
+}
+
+static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+ u32 duty_cycle, val;
+ int ret;
+
+ /* The hardware only supports normal polarity and fixed period. */
+ if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
+ return -EINVAL;
+
+ if (!state->enabled)
+ return lgm_pwm_enable(chip, 0);
+
+ duty_cycle = min_t(u64, state->duty_cycle, pc->period);
+ val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
+
+ ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
+ FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
+ if (ret)
+ return ret;
+
+ return lgm_pwm_enable(chip, 1);
+}
+
+static void lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+ u32 duty, val;
+
+ state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
+ LGM_PWM_FAN_EN_EN);
+ state->polarity = PWM_POLARITY_NORMAL;
+ state->period = pc->period; /* fixed period */
+
+ regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
+ duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
+ state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
+}
+
+static const struct pwm_ops lgm_pwm_ops = {
+ .get_state = lgm_pwm_get_state,
+ .apply = lgm_pwm_apply,
+ .owner = THIS_MODULE,
+};
+
+static void lgm_pwm_init(struct lgm_pwm_chip *pc)
+{
+ struct regmap *regmap = pc->regmap;
+ u32 con0_val;
+
+ con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
+ pc->period = LGM_PWM_PERIOD_2WIRE_NS;
+ regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
+ LGM_PWM_DEFAULT_RPM);
+ regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
+ con0_val);
+}
+
+static const struct regmap_config lgm_pwm_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+};
+
+static void lgm_clk_release(void *data)
+{
+ struct clk *clk = data;
+
+ clk_disable_unprepare(clk);
+}
+
+static int lgm_clk_enable(struct device *dev, struct clk *clk)
+{
+ int ret;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(dev, lgm_clk_release, clk);
+}
+
+static void lgm_reset_control_release(void *data)
+{
+ struct reset_control *rst = data;
+
+ reset_control_assert(rst);
+}
+
+static int lgm_reset_control_deassert(struct device *dev, struct reset_control *rst)
+{
+ int ret;
+
+ ret = reset_control_deassert(rst);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(dev, lgm_reset_control_release, rst);
+}
+
+static int lgm_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct reset_control *rst;
+ struct lgm_pwm_chip *pc;
+ void __iomem *io_base;
+ struct clk *clk;
+ int ret;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+
+ io_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(io_base))
+ return PTR_ERR(io_base);
+
+ pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
+ if (IS_ERR(pc->regmap))
+ return dev_err_probe(dev, PTR_ERR(pc->regmap),
+ "failed to init register map\n");
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
+
+ ret = lgm_clk_enable(dev, clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable clock\n");
+
+ rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(rst))
+ return dev_err_probe(dev, PTR_ERR(rst),
+ "failed to get reset control\n");
+
+ ret = lgm_reset_control_deassert(dev, rst);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot deassert reset control\n");
+
+ pc->chip.dev = dev;
+ pc->chip.ops = &lgm_pwm_ops;
+ pc->chip.npwm = 1;
+ pc->chip.base = -1;
+
+ lgm_pwm_init(pc);
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to add PWM chip\n");
+
+ return 0;
+}
+
+static int lgm_pwm_remove(struct platform_device *pdev)
+{
+ struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id lgm_pwm_of_match[] = {
+ { .compatible = "intel,lgm-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
+
+static struct platform_driver lgm_pwm_driver = {
+ .driver = {
+ .name = "intel-pwm",
+ .of_match_table = lgm_pwm_of_match,
+ },
+ .probe = lgm_pwm_probe,
+ .remove = lgm_pwm_remove,
+};
+module_platform_driver(lgm_pwm_driver);
+
+MODULE_LICENSE("GPL v2");