diff mbox series

[3/3] ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen

Message ID 20201106112412.390724-4-j.neuschaefer@gmx.net
State New
Headers show
Series Support for ELAN eKTF2132 touchscreens | expand

Commit Message

J. Neuschäfer Nov. 6, 2020, 11:24 a.m. UTC
The Kobo Aura has an eKTF2132 touchscreen controller.

Although the vendor kernel toggles a reset pin (GPIO5-12) during the
startup sequence, the touchscreen works without it.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

This patch requires "[PATCH] ARM: dts: imx50-kobo-aura: Add 'grp' suffix
to pinctrl node names" in order to apply cleanly.
(https://lore.kernel.org/lkml/20201031210729.2804471-1-j.neuschaefer@gmx.net/)
---
 arch/arm/boot/dts/imx50-kobo-aura.dts | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--
2.28.0

Comments

Shawn Guo Nov. 10, 2020, 2:35 a.m. UTC | #1
On Fri, Nov 06, 2020 at 12:24:12PM +0100, Jonathan Neuschäfer wrote:
> The Kobo Aura has an eKTF2132 touchscreen controller.

> 

> Although the vendor kernel toggles a reset pin (GPIO5-12) during the

> startup sequence, the touchscreen works without it.

> 

> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>


Applied, thanks.
Shawn Guo Nov. 10, 2020, 3:12 a.m. UTC | #2
On Fri, Nov 06, 2020 at 12:24:12PM +0100, Jonathan Neuschäfer wrote:
> The Kobo Aura has an eKTF2132 touchscreen controller.

> 

> Although the vendor kernel toggles a reset pin (GPIO5-12) during the

> startup sequence, the touchscreen works without it.

> 

> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

> ---

> 

> This patch requires "[PATCH] ARM: dts: imx50-kobo-aura: Add 'grp' suffix

> to pinctrl node names" in order to apply cleanly.

> (https://lore.kernel.org/lkml/20201031210729.2804471-1-j.neuschaefer@gmx.net/)

> ---

>  arch/arm/boot/dts/imx50-kobo-aura.dts | 16 +++++++++++++++-

>  1 file changed, 15 insertions(+), 1 deletion(-)

> 

> diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts

> index b2fbee60271f2..82ce8c43be867 100644

> --- a/arch/arm/boot/dts/imx50-kobo-aura.dts

> +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts

> @@ -120,7 +120,14 @@ &i2c1 {

>  	pinctrl-0 = <&pinctrl_i2c1>;

>  	status = "okay";

> 

> -	/* TODO: ektf2132 touch controller at 0x15 */

> +	touchscreen@15 {

> +		reg = <0x15>;

> +		compatible = "elan,ektf2132";

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&pinctrl_ts>;

> +		power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;

> +		interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;


It needs include of <dt-bindings/interrupt-controller/irq.h>.

  DTC     arch/arm/boot/dts/imx50-kobo-aura.dtb
Error: ../arch/arm/boot/dts/imx50-kobo-aura.dts:128.36-37 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:326: recipe for target 'arch/arm/boot/dts/imx50-kobo-aura.dtb' failed
make[2]: *** [arch/arm/boot/dts/imx50-kobo-aura.dtb] Error 1

Patch dropped.

Shawn

> +	};

>  };

> 

>  &i2c2 {

> @@ -240,6 +247,13 @@ MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4

>  		>;

>  	};

> 

> +	pinctrl_ts: tsgrp {

> +		fsl,pins = <

> +			MX50_PAD_CSPI_MOSI__GPIO4_9		0x0

> +			MX50_PAD_SD2_D5__GPIO5_13		0x0

> +		>;

> +	};

> +

>  	pinctrl_uart2: uart2grp {

>  		fsl,pins = <

>  			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4

> --

> 2.28.0

>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index b2fbee60271f2..82ce8c43be867 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -120,7 +120,14 @@  &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";

-	/* TODO: ektf2132 touch controller at 0x15 */
+	touchscreen@15 {
+		reg = <0x15>;
+		compatible = "elan,ektf2132";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;
+	};
 };

 &i2c2 {
@@ -240,6 +247,13 @@  MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4
 		>;
 	};

+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_MOSI__GPIO4_9		0x0
+			MX50_PAD_SD2_D5__GPIO5_13		0x0
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4