| Message ID | 20201028232759.1928479-3-atish.patra@wdc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add Microchip PolarFire Soc Support | expand |
On 28/10/2020 23:27, Atish Patra wrote: > Add initial DTS for Microchip ICICLE board having only > essential devcies (clocks, sdhci, ethernet, serial, etc). > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > 3 files changed, 316 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ca1f8cbd78c0..3ea94ea0a18a 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > subdir-y += sifive > subdir-y += kendryte > +subdir-y += microchip > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > new file mode 100644 > index 000000000000..55ad77521304 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > new file mode 100644 > index 000000000000..5848920af55c > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > @@ -0,0 +1,313 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +/* Clock frequency (in Hz) of the rtcclk */ > +#define RTCCLK_FREQ 1000000 > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC"; > + compatible = "microchip,polarfire-soc"; > + > + chosen { > + stdout-path = &serial0; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = <RTCCLK_FREQ>; > + > + cpu@0 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <128>; > + i-cache-size = <16384>; > + reg = <0>; > + riscv,isa = "rv64imac"; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@1 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <1>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@2 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <2>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@3 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <3>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@4 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <4>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + cpu4_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; > + clocks = <&clkcfg 26>; > + }; U-boot doesn't seem to be updating this properly. The board should have 2GiB, confirmed by looking at the device's chip markings. We only see 1GiB memory. The 0x80000000 bus window is only capable of dealing with 1GiB memory. The higher 64-bit one can have 16GiB mapped. Do we need a second node for the second GiB of memory? > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + cache-controller@2010000 { > + compatible = "sifive,fu540-c000-ccache", "cache"; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <1024>; > + cache-size = <2097152>; > + cache-unified; > + interrupt-parent = <&plic>; > + interrupts = <1 2 3>; > + reg = <0x0 0x2010000 0x0 0x1000>; > + }; > + > + clint@2000000 { > + compatible = "riscv,clint0"; > + reg = <0x0 0x2000000 0x0 0xC000>; > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > + &cpu1_intc 3 &cpu1_intc 7 > + &cpu2_intc 3 &cpu2_intc 7 > + &cpu3_intc 3 &cpu3_intc 7 > + &cpu4_intc 3 &cpu4_intc 7>; > + }; > + > + plic: interrupt-controller@c000000 { > + #interrupt-cells = <1>; > + compatible = "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + riscv,ndev = <53>; > + interrupt-controller; > + interrupts-extended = <&cpu0_intc 11 > + &cpu1_intc 11 &cpu1_intc 9 > + &cpu2_intc 11 &cpu2_intc 9 > + &cpu3_intc 11 &cpu3_intc 9 > + &cpu4_intc 11 &cpu4_intc 9>; > + }; > + > + dma@3000000 { > + compatible = "sifive,fu540-c000-pdma"; > + reg = <0x0 0x3000000 0x0 0x8000>; > + interrupt-parent = <&plic>; > + interrupts = <23 24 25 26 27 28 29 30>; > + #dma-cells = <1>; > + }; > + > + refclk: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; > + > + clkcfg: clkcfg@20002000 { > + compatible = "microchip,pfsoc-clkcfg"; > + reg = <0x0 0x20002000 0x0 0x1000>; > + reg-names = "mss_sysreg"; > + clocks = <&refclk>; > + #clock-cells = <1>; > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; Any chance of making this list multi-line, it is difficult to read as-is. > + }; > + > + serial0: serial@20000000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20000000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <90>; > + current-speed = <115200>; > + clocks = <&clkcfg 8>; > + status = "okay"; > + }; > + > + serial1: serial@20100000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20100000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <91>; > + current-speed = <115200>; > + clocks = <&clkcfg 9>; > + status = "okay"; > + }; > + > + serial2: serial@20102000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20102000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <92>; > + current-speed = <115200>; > + clocks = <&clkcfg 10>; > + status = "okay"; > + }; > + > + serial3: serial@20104000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20104000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <93>; > + current-speed = <115200>; > + clocks = <&clkcfg 11>; > + status = "okay"; > + }; > + > + sdcard: sdhc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + disable-wp; > + no-1-8-v; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + status = "okay"; > + }; Given eMMC is the default device, shouldn't that be default for the device tree too? Even if not, having the emmc node here would be a good thing as it is different to the SD node. > + > + emac1: ethernet@20112000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20112000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <70 71 72 73>; > + mac-address = [56 34 12 00 FC 00]; > + phy-mode = "sgmii"; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + clock-names = "pclk", "hclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy1: ethernet-phy@9 { > + reg = <9>; > + ti,fifo-depth = <0x01>; > + }; > + }; Aren't there two ethernet ports on the board? Also, at the moment u-boot is not filling the MAC address parameter in so we've got at two boards on the network with the same MAC until we override it in the device tree for the second. > + > + uio_axi_lsram@2030000000 { > + compatible = "generic-uio"; > + reg = <0x20 0x30000000 0 0x80000000 >; > + status = "okay"; > + }; > + }; > +}; > -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius https://www.codethink.co.uk/privacy.html
On Thu, Oct 29, 2020 at 3:24 AM Ben Dooks <ben.dooks@codethink.co.uk> wrote: > > On 28/10/2020 23:27, Atish Patra wrote: > > Add initial DTS for Microchip ICICLE board having only > > essential devcies (clocks, sdhci, ethernet, serial, etc). > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > --- > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > 3 files changed, 316 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > > index ca1f8cbd78c0..3ea94ea0a18a 100644 > > --- a/arch/riscv/boot/dts/Makefile > > +++ b/arch/riscv/boot/dts/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > subdir-y += sifive > > subdir-y += kendryte > > +subdir-y += microchip > > > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > > new file mode 100644 > > index 000000000000..55ad77521304 > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/Makefile > > @@ -0,0 +1,2 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > new file mode 100644 > > index 000000000000..5848920af55c > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > @@ -0,0 +1,313 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* Copyright (c) 2020 Microchip Technology Inc */ > > + > > +/dts-v1/; > > + > > +/* Clock frequency (in Hz) of the rtcclk */ > > +#define RTCCLK_FREQ 1000000 > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "Microchip PolarFire-SoC"; > > + compatible = "microchip,polarfire-soc"; > > + > > + chosen { > > + stdout-path = &serial0; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + timebase-frequency = <RTCCLK_FREQ>; > > + > > + cpu@0 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <128>; > > + i-cache-size = <16384>; > > + reg = <0>; > > + riscv,isa = "rv64imac"; > > + status = "disabled"; > > + > > + cpu0_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@1 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <1>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu1_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@2 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <2>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu2_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@3 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <3>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu3_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@4 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <4>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + cpu4_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x0 0x80000000 0x0 0x40000000>; > > + clocks = <&clkcfg 26>; > > + }; > > U-boot doesn't seem to be updating this properly. > > The board should have 2GiB, confirmed by looking at the device's > chip markings. We only see 1GiB memory. The 0x80000000 bus window > is only capable of dealing with 1GiB memory. The higher 64-bit one > can have 16GiB mapped. > > Do we need a second node for the second GiB of memory? > We could just modify the reg size but to allow more memory. I tried that for Linux but it didn't boot. Probably, DDR init code in HSS only initialized 1GB of memory. > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + ranges; > > + > > + cache-controller@2010000 { > > + compatible = "sifive,fu540-c000-ccache", "cache"; > > + cache-block-size = <64>; > > + cache-level = <2>; > > + cache-sets = <1024>; > > + cache-size = <2097152>; > > + cache-unified; > > + interrupt-parent = <&plic>; > > + interrupts = <1 2 3>; > > + reg = <0x0 0x2010000 0x0 0x1000>; > > + }; > > + > > + clint@2000000 { > > + compatible = "riscv,clint0"; > > + reg = <0x0 0x2000000 0x0 0xC000>; > > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > > + &cpu1_intc 3 &cpu1_intc 7 > > + &cpu2_intc 3 &cpu2_intc 7 > > + &cpu3_intc 3 &cpu3_intc 7 > > + &cpu4_intc 3 &cpu4_intc 7>; > > + }; > > + > > + plic: interrupt-controller@c000000 { > > + #interrupt-cells = <1>; > > + compatible = "sifive,plic-1.0.0"; > > + reg = <0x0 0xc000000 0x0 0x4000000>; > > + riscv,ndev = <53>; > > + interrupt-controller; > > + interrupts-extended = <&cpu0_intc 11 > > + &cpu1_intc 11 &cpu1_intc 9 > > + &cpu2_intc 11 &cpu2_intc 9 > > + &cpu3_intc 11 &cpu3_intc 9 > > + &cpu4_intc 11 &cpu4_intc 9>; > > + }; > > + > > + dma@3000000 { > > + compatible = "sifive,fu540-c000-pdma"; > > + reg = <0x0 0x3000000 0x0 0x8000>; > > + interrupt-parent = <&plic>; > > + interrupts = <23 24 25 26 27 28 29 30>; > > + #dma-cells = <1>; > > + }; > > + > > + refclk: refclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <600000000>; > > + clock-output-names = "msspllclk"; > > + }; > > + > > + clkcfg: clkcfg@20002000 { > > + compatible = "microchip,pfsoc-clkcfg"; > > + reg = <0x0 0x20002000 0x0 0x1000>; > > + reg-names = "mss_sysreg"; > > + clocks = <&refclk>; > > + #clock-cells = <1>; > > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; > > Any chance of making this list multi-line, it is difficult to read as-is. > Yes. We can also get rid of a few names that are not used. I will fix it in v2. > > + }; > > + > > + serial0: serial@20000000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20000000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <90>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 8>; > > + status = "okay"; > > + }; > > + > > + serial1: serial@20100000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20100000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <91>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 9>; > > + status = "okay"; > > + }; > > + > > + serial2: serial@20102000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20102000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <92>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 10>; > > + status = "okay"; > > + }; > > + > > + serial3: serial@20104000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20104000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <93>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 11>; > > + status = "okay"; > > + }; > > + > > + sdcard: sdhc@20008000 { > > + compatible = "cdns,sd4hc"; > > + reg = <0x0 0x20008000 0x0 0x1000>; > > + interrupt-parent = <&plic>; > > + interrupts = <88>; > > + pinctrl-names = "default"; > > + clocks = <&clkcfg 6>; > > + bus-width = <4>; > > + disable-wp; > > + no-1-8-v; > > + cap-mmc-highspeed; > > + cap-sd-highspeed; > > + card-detect-delay = <200>; > > + sd-uhs-sdr12; > > + sd-uhs-sdr25; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + max-frequency = <200000000>; > > + status = "okay"; > > + }; > > Given eMMC is the default device, shouldn't that be default for the > device tree too? Even if not, having the emmc node here would be a > good thing as it is different to the SD node. > I tested this device tree with sdcard. That's why, I just picked the sdcard node. I am not sure if both eMMC & sdcard node can co-exist. The polar fire soc github repo seems to point that both of them have the same address and only 1 can be enabled at that time. That may not be true now as the github repo has not been updated in couple of months. @Cyril : Can we enable both eMMC & sdcard at the same time ? > > + > > + emac1: ethernet@20112000 { > > + compatible = "cdns,macb"; > > + reg = <0x0 0x20112000 0x0 0x2000>; > > + interrupt-parent = <&plic>; > > + interrupts = <70 71 72 73>; > > + mac-address = [56 34 12 00 FC 00]; > > + phy-mode = "sgmii"; > > + clocks = <&clkcfg 5>, <&clkcfg 2>; > > + clock-names = "pclk", "hclk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + phy1: ethernet-phy@9 { > > + reg = <9>; > > + ti,fifo-depth = <0x01>; > > + }; > > + }; > > Aren't there two ethernet ports on the board? > Yes. I hadn't tested that out. I will test it and add the 2nd one as well. > Also, at the moment u-boot is not filling the MAC address parameter > in so we've got at two boards on the network with the same MAC until > we override it in the device tree for the second. > Looking at latest U-Boot patches, it seems it updates the mac address from the serial number. > > + > > + uio_axi_lsram@2030000000 { > > + compatible = "generic-uio"; > > + reg = <0x20 0x30000000 0 0x80000000 >; > > + status = "okay"; > > + }; > > + }; > > +}; > > > > > -- > Ben Dooks http://www.codethink.co.uk/ > Senior Engineer Codethink - Providing Genius > > https://www.codethink.co.uk/privacy.html > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv -- Regards, Atish
On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: > > Add initial DTS for Microchip ICICLE board having only > essential devcies (clocks, sdhci, ethernet, serial, etc). > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ I suggest we split this DTS into two parts: 1. SOC (microchip-polarfire.dtsi) 2. Board (microchip-icicle-kit-a000.dts) This will be much cleaner and aligned with what is done on other architectures. > 3 files changed, 316 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ca1f8cbd78c0..3ea94ea0a18a 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > subdir-y += sifive > subdir-y += kendryte > +subdir-y += microchip > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > new file mode 100644 > index 000000000000..55ad77521304 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > new file mode 100644 > index 000000000000..5848920af55c > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > @@ -0,0 +1,313 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +/* Clock frequency (in Hz) of the rtcclk */ > +#define RTCCLK_FREQ 1000000 > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC"; > + compatible = "microchip,polarfire-soc"; > + > + chosen { > + stdout-path = &serial0; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = <RTCCLK_FREQ>; > + > + cpu@0 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <128>; > + i-cache-size = <16384>; > + reg = <0>; > + riscv,isa = "rv64imac"; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@1 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <1>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@2 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <2>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@3 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <3>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@4 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <4>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + cpu4_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; > + clocks = <&clkcfg 26>; > + }; > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + cache-controller@2010000 { > + compatible = "sifive,fu540-c000-ccache", "cache"; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <1024>; > + cache-size = <2097152>; > + cache-unified; > + interrupt-parent = <&plic>; > + interrupts = <1 2 3>; > + reg = <0x0 0x2010000 0x0 0x1000>; > + }; > + > + clint@2000000 { > + compatible = "riscv,clint0"; > + reg = <0x0 0x2000000 0x0 0xC000>; > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > + &cpu1_intc 3 &cpu1_intc 7 > + &cpu2_intc 3 &cpu2_intc 7 > + &cpu3_intc 3 &cpu3_intc 7 > + &cpu4_intc 3 &cpu4_intc 7>; > + }; > + > + plic: interrupt-controller@c000000 { > + #interrupt-cells = <1>; > + compatible = "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + riscv,ndev = <53>; > + interrupt-controller; > + interrupts-extended = <&cpu0_intc 11 > + &cpu1_intc 11 &cpu1_intc 9 > + &cpu2_intc 11 &cpu2_intc 9 > + &cpu3_intc 11 &cpu3_intc 9 > + &cpu4_intc 11 &cpu4_intc 9>; > + }; > + > + dma@3000000 { > + compatible = "sifive,fu540-c000-pdma"; > + reg = <0x0 0x3000000 0x0 0x8000>; > + interrupt-parent = <&plic>; > + interrupts = <23 24 25 26 27 28 29 30>; > + #dma-cells = <1>; > + }; > + > + refclk: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; > + > + clkcfg: clkcfg@20002000 { > + compatible = "microchip,pfsoc-clkcfg"; > + reg = <0x0 0x20002000 0x0 0x1000>; > + reg-names = "mss_sysreg"; > + clocks = <&refclk>; > + #clock-cells = <1>; > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; > + }; > + > + serial0: serial@20000000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20000000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <90>; > + current-speed = <115200>; > + clocks = <&clkcfg 8>; > + status = "okay"; > + }; > + > + serial1: serial@20100000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20100000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <91>; > + current-speed = <115200>; > + clocks = <&clkcfg 9>; > + status = "okay"; > + }; > + > + serial2: serial@20102000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20102000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <92>; > + current-speed = <115200>; > + clocks = <&clkcfg 10>; > + status = "okay"; > + }; > + > + serial3: serial@20104000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20104000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <93>; > + current-speed = <115200>; > + clocks = <&clkcfg 11>; > + status = "okay"; > + }; > + > + sdcard: sdhc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + disable-wp; > + no-1-8-v; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + status = "okay"; > + }; > + > + emac1: ethernet@20112000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20112000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <70 71 72 73>; > + mac-address = [56 34 12 00 FC 00]; > + phy-mode = "sgmii"; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + clock-names = "pclk", "hclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy1: ethernet-phy@9 { > + reg = <9>; > + ti,fifo-depth = <0x01>; > + }; > + }; > + > + uio_axi_lsram@2030000000 { > + compatible = "generic-uio"; > + reg = <0x20 0x30000000 0 0x80000000 >; > + status = "okay"; > + }; > + }; > +}; > -- > 2.25.1 > Regards, Anup
On Fri, Oct 30, 2020 at 2:05 AM Anup Patel <anup@brainfault.org> wrote: > > On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: > > > > Add initial DTS for Microchip ICICLE board having only > > essential devcies (clocks, sdhci, ethernet, serial, etc). > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > --- > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > I suggest we split this DTS into two parts: > 1. SOC (microchip-polarfire.dtsi) > 2. Board (microchip-icicle-kit-a000.dts) > > This will be much cleaner and aligned with what is done > on other architectures. > Sure. I will do that in v2. > > 3 files changed, 316 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > > index ca1f8cbd78c0..3ea94ea0a18a 100644 > > --- a/arch/riscv/boot/dts/Makefile > > +++ b/arch/riscv/boot/dts/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > subdir-y += sifive > > subdir-y += kendryte > > +subdir-y += microchip > > > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > > new file mode 100644 > > index 000000000000..55ad77521304 > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/Makefile > > @@ -0,0 +1,2 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > new file mode 100644 > > index 000000000000..5848920af55c > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > @@ -0,0 +1,313 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* Copyright (c) 2020 Microchip Technology Inc */ > > + > > +/dts-v1/; > > + > > +/* Clock frequency (in Hz) of the rtcclk */ > > +#define RTCCLK_FREQ 1000000 > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "Microchip PolarFire-SoC"; > > + compatible = "microchip,polarfire-soc"; > > + > > + chosen { > > + stdout-path = &serial0; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + timebase-frequency = <RTCCLK_FREQ>; > > + > > + cpu@0 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <128>; > > + i-cache-size = <16384>; > > + reg = <0>; > > + riscv,isa = "rv64imac"; > > + status = "disabled"; > > + > > + cpu0_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@1 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <1>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu1_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@2 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <2>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu2_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@3 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <3>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu3_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@4 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <4>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + cpu4_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x0 0x80000000 0x0 0x40000000>; > > + clocks = <&clkcfg 26>; > > + }; > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + ranges; > > + > > + cache-controller@2010000 { > > + compatible = "sifive,fu540-c000-ccache", "cache"; > > + cache-block-size = <64>; > > + cache-level = <2>; > > + cache-sets = <1024>; > > + cache-size = <2097152>; > > + cache-unified; > > + interrupt-parent = <&plic>; > > + interrupts = <1 2 3>; > > + reg = <0x0 0x2010000 0x0 0x1000>; > > + }; > > + > > + clint@2000000 { > > + compatible = "riscv,clint0"; > > + reg = <0x0 0x2000000 0x0 0xC000>; > > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > > + &cpu1_intc 3 &cpu1_intc 7 > > + &cpu2_intc 3 &cpu2_intc 7 > > + &cpu3_intc 3 &cpu3_intc 7 > > + &cpu4_intc 3 &cpu4_intc 7>; > > + }; > > + > > + plic: interrupt-controller@c000000 { > > + #interrupt-cells = <1>; > > + compatible = "sifive,plic-1.0.0"; > > + reg = <0x0 0xc000000 0x0 0x4000000>; > > + riscv,ndev = <53>; > > + interrupt-controller; > > + interrupts-extended = <&cpu0_intc 11 > > + &cpu1_intc 11 &cpu1_intc 9 > > + &cpu2_intc 11 &cpu2_intc 9 > > + &cpu3_intc 11 &cpu3_intc 9 > > + &cpu4_intc 11 &cpu4_intc 9>; > > + }; > > + > > + dma@3000000 { > > + compatible = "sifive,fu540-c000-pdma"; > > + reg = <0x0 0x3000000 0x0 0x8000>; > > + interrupt-parent = <&plic>; > > + interrupts = <23 24 25 26 27 28 29 30>; > > + #dma-cells = <1>; > > + }; > > + > > + refclk: refclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <600000000>; > > + clock-output-names = "msspllclk"; > > + }; > > + > > + clkcfg: clkcfg@20002000 { > > + compatible = "microchip,pfsoc-clkcfg"; > > + reg = <0x0 0x20002000 0x0 0x1000>; > > + reg-names = "mss_sysreg"; > > + clocks = <&refclk>; > > + #clock-cells = <1>; > > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; > > + }; > > + > > + serial0: serial@20000000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20000000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <90>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 8>; > > + status = "okay"; > > + }; > > + > > + serial1: serial@20100000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20100000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <91>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 9>; > > + status = "okay"; > > + }; > > + > > + serial2: serial@20102000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20102000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <92>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 10>; > > + status = "okay"; > > + }; > > + > > + serial3: serial@20104000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20104000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <93>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 11>; > > + status = "okay"; > > + }; > > + > > + sdcard: sdhc@20008000 { > > + compatible = "cdns,sd4hc"; > > + reg = <0x0 0x20008000 0x0 0x1000>; > > + interrupt-parent = <&plic>; > > + interrupts = <88>; > > + pinctrl-names = "default"; > > + clocks = <&clkcfg 6>; > > + bus-width = <4>; > > + disable-wp; > > + no-1-8-v; > > + cap-mmc-highspeed; > > + cap-sd-highspeed; > > + card-detect-delay = <200>; > > + sd-uhs-sdr12; > > + sd-uhs-sdr25; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + max-frequency = <200000000>; > > + status = "okay"; > > + }; > > + > > + emac1: ethernet@20112000 { > > + compatible = "cdns,macb"; > > + reg = <0x0 0x20112000 0x0 0x2000>; > > + interrupt-parent = <&plic>; > > + interrupts = <70 71 72 73>; > > + mac-address = [56 34 12 00 FC 00]; > > + phy-mode = "sgmii"; > > + clocks = <&clkcfg 5>, <&clkcfg 2>; > > + clock-names = "pclk", "hclk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + phy1: ethernet-phy@9 { > > + reg = <9>; > > + ti,fifo-depth = <0x01>; > > + }; > > + }; > > + > > + uio_axi_lsram@2030000000 { > > + compatible = "generic-uio"; > > + reg = <0x20 0x30000000 0 0x80000000 >; > > + status = "okay"; > > + }; > > + }; > > +}; > > -- > > 2.25.1 > > > > Regards, > Anup > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv -- Regards, Atish
On 30/10/2020 09:05, Anup Patel wrote: > On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: >> >> Add initial DTS for Microchip ICICLE board having only >> essential devcies (clocks, sdhci, ethernet, serial, etc). >> >> Signed-off-by: Atish Patra <atish.patra@wdc.com> >> --- >> arch/riscv/boot/dts/Makefile | 1 + >> arch/riscv/boot/dts/microchip/Makefile | 2 + >> .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > I suggest we split this DTS into two parts: > 1. SOC (microchip-polarfire.dtsi) > 2. Board (microchip-icicle-kit-a000.dts) I was just going to suggest that. -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius https://www.codethink.co.uk/privacy.html
On Fri, Oct 30, 2020 at 5:08 PM Anup Patel <anup@brainfault.org> wrote: > > On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: > > > > Add initial DTS for Microchip ICICLE board having only > > essential devcies (clocks, sdhci, ethernet, serial, etc). > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > --- > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > I suggest we split this DTS into two parts: > 1. SOC (microchip-polarfire.dtsi) > 2. Board (microchip-icicle-kit-a000.dts) I also doubt what is the correct board name. I suspect the -a000 comes from the SiFive board name convention, but does not apply to the Icicle Kit board. @Cyril, please confirm. > > This will be much cleaner and aligned with what is done > on other architectures. > > > 3 files changed, 316 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > Regards, Bin
On 30/10/2020 20:27, Atish Patra wrote: > On Fri, Oct 30, 2020 at 2:05 AM Anup Patel <anup@brainfault.org> wrote: >> >> On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: >>> >>> Add initial DTS for Microchip ICICLE board having only >>> essential devcies (clocks, sdhci, ethernet, serial, etc). >>> >>> Signed-off-by: Atish Patra <atish.patra@wdc.com> >>> --- >>> arch/riscv/boot/dts/Makefile | 1 + >>> arch/riscv/boot/dts/microchip/Makefile | 2 + >>> .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ >> >> I suggest we split this DTS into two parts: >> 1. SOC (microchip-polarfire.dtsi) >> 2. Board (microchip-icicle-kit-a000.dts) >> >> This will be much cleaner and aligned with what is done >> on other architectures. >> > > Sure. I will do that in v2. > >>> 3 files changed, 316 insertions(+) >>> create mode 100644 arch/riscv/boot/dts/microchip/Makefile >>> create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts >>> >>> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile >>> index ca1f8cbd78c0..3ea94ea0a18a 100644 >>> --- a/arch/riscv/boot/dts/Makefile >>> +++ b/arch/riscv/boot/dts/Makefile >>> @@ -1,5 +1,6 @@ >>> # SPDX-License-Identifier: GPL-2.0 >>> subdir-y += sifive >>> subdir-y += kendryte >>> +subdir-y += microchip >>> >>> obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) >>> diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile >>> new file mode 100644 >>> index 000000000000..55ad77521304 >>> --- /dev/null >>> +++ b/arch/riscv/boot/dts/microchip/Makefile >>> @@ -0,0 +1,2 @@ >>> +# SPDX-License-Identifier: GPL-2.0 >>> +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb >>> diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts >>> new file mode 100644 >>> index 000000000000..5848920af55c >>> --- /dev/null >>> +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts >>> @@ -0,0 +1,313 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ >>> +/* Copyright (c) 2020 Microchip Technology Inc */ >>> + >>> +/dts-v1/; >>> + >>> +/* Clock frequency (in Hz) of the rtcclk */ >>> +#define RTCCLK_FREQ 1000000 >>> + >>> +/ { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + model = "Microchip PolarFire-SoC"; >>> + compatible = "microchip,polarfire-soc"; >>> + >>> + chosen { >>> + stdout-path = &serial0; >>> + }; >>> + >>> + cpus { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + timebase-frequency = <RTCCLK_FREQ>; >>> + >>> + cpu@0 { >>> + clock-frequency = <0>; >>> + compatible = "sifive,rocket0", "riscv"; >>> + device_type = "cpu"; >>> + i-cache-block-size = <64>; >>> + i-cache-sets = <128>; >>> + i-cache-size = <16384>; >>> + reg = <0>; >>> + riscv,isa = "rv64imac"; >>> + status = "disabled"; >>> + >>> + cpu0_intc: interrupt-controller { >>> + #interrupt-cells = <1>; >>> + compatible = "riscv,cpu-intc"; >>> + interrupt-controller; >>> + }; >>> + }; >>> + >>> + cpu@1 { >>> + clock-frequency = <0>; >>> + compatible = "sifive,rocket0", "riscv"; >>> + d-cache-block-size = <64>; >>> + d-cache-sets = <64>; >>> + d-cache-size = <32768>; >>> + d-tlb-sets = <1>; >>> + d-tlb-size = <32>; >>> + device_type = "cpu"; >>> + i-cache-block-size = <64>; >>> + i-cache-sets = <64>; >>> + i-cache-size = <32768>; >>> + i-tlb-sets = <1>; >>> + i-tlb-size = <32>; >>> + mmu-type = "riscv,sv39"; >>> + reg = <1>; >>> + riscv,isa = "rv64imafdc"; >>> + tlb-split; >>> + status = "okay"; >>> + >>> + cpu1_intc: interrupt-controller { >>> + #interrupt-cells = <1>; >>> + compatible = "riscv,cpu-intc"; >>> + interrupt-controller; >>> + }; >>> + }; >>> + >>> + cpu@2 { >>> + clock-frequency = <0>; >>> + compatible = "sifive,rocket0", "riscv"; >>> + d-cache-block-size = <64>; >>> + d-cache-sets = <64>; >>> + d-cache-size = <32768>; >>> + d-tlb-sets = <1>; >>> + d-tlb-size = <32>; >>> + device_type = "cpu"; >>> + i-cache-block-size = <64>; >>> + i-cache-sets = <64>; >>> + i-cache-size = <32768>; >>> + i-tlb-sets = <1>; >>> + i-tlb-size = <32>; >>> + mmu-type = "riscv,sv39"; >>> + reg = <2>; >>> + riscv,isa = "rv64imafdc"; >>> + tlb-split; >>> + status = "okay"; >>> + >>> + cpu2_intc: interrupt-controller { >>> + #interrupt-cells = <1>; >>> + compatible = "riscv,cpu-intc"; >>> + interrupt-controller; >>> + }; >>> + }; >>> + >>> + cpu@3 { >>> + clock-frequency = <0>; >>> + compatible = "sifive,rocket0", "riscv"; >>> + d-cache-block-size = <64>; >>> + d-cache-sets = <64>; >>> + d-cache-size = <32768>; >>> + d-tlb-sets = <1>; >>> + d-tlb-size = <32>; >>> + device_type = "cpu"; >>> + i-cache-block-size = <64>; >>> + i-cache-sets = <64>; >>> + i-cache-size = <32768>; >>> + i-tlb-sets = <1>; >>> + i-tlb-size = <32>; >>> + mmu-type = "riscv,sv39"; >>> + reg = <3>; >>> + riscv,isa = "rv64imafdc"; >>> + tlb-split; >>> + status = "okay"; >>> + >>> + cpu3_intc: interrupt-controller { >>> + #interrupt-cells = <1>; >>> + compatible = "riscv,cpu-intc"; >>> + interrupt-controller; >>> + }; >>> + }; >>> + >>> + cpu@4 { >>> + clock-frequency = <0>; >>> + compatible = "sifive,rocket0", "riscv"; >>> + d-cache-block-size = <64>; >>> + d-cache-sets = <64>; >>> + d-cache-size = <32768>; >>> + d-tlb-sets = <1>; >>> + d-tlb-size = <32>; >>> + device_type = "cpu"; >>> + i-cache-block-size = <64>; >>> + i-cache-sets = <64>; >>> + i-cache-size = <32768>; >>> + i-tlb-sets = <1>; >>> + i-tlb-size = <32>; >>> + mmu-type = "riscv,sv39"; >>> + reg = <4>; >>> + riscv,isa = "rv64imafdc"; >>> + tlb-split; >>> + status = "okay"; >>> + cpu4_intc: interrupt-controller { >>> + #interrupt-cells = <1>; >>> + compatible = "riscv,cpu-intc"; >>> + interrupt-controller; >>> + }; >>> + }; >>> + }; >>> + >>> + memory@80000000 { >>> + device_type = "memory"; >>> + reg = <0x0 0x80000000 0x0 0x40000000>; >>> + clocks = <&clkcfg 26>; >>> + }; >>> + >>> + soc { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + compatible = "simple-bus"; >>> + ranges; >>> + >>> + cache-controller@2010000 { >>> + compatible = "sifive,fu540-c000-ccache", "cache"; >>> + cache-block-size = <64>; >>> + cache-level = <2>; >>> + cache-sets = <1024>; >>> + cache-size = <2097152>; >>> + cache-unified; >>> + interrupt-parent = <&plic>; >>> + interrupts = <1 2 3>; >>> + reg = <0x0 0x2010000 0x0 0x1000>; >>> + }; >>> + >>> + clint@2000000 { >>> + compatible = "riscv,clint0"; >>> + reg = <0x0 0x2000000 0x0 0xC000>; >>> + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 >>> + &cpu1_intc 3 &cpu1_intc 7 >>> + &cpu2_intc 3 &cpu2_intc 7 >>> + &cpu3_intc 3 &cpu3_intc 7 >>> + &cpu4_intc 3 &cpu4_intc 7>; >>> + }; >>> + >>> + plic: interrupt-controller@c000000 { >>> + #interrupt-cells = <1>; >>> + compatible = "sifive,plic-1.0.0"; >>> + reg = <0x0 0xc000000 0x0 0x4000000>; >>> + riscv,ndev = <53>; >>> + interrupt-controller; >>> + interrupts-extended = <&cpu0_intc 11 >>> + &cpu1_intc 11 &cpu1_intc 9 >>> + &cpu2_intc 11 &cpu2_intc 9 >>> + &cpu3_intc 11 &cpu3_intc 9 >>> + &cpu4_intc 11 &cpu4_intc 9>; >>> + }; >>> + >>> + dma@3000000 { >>> + compatible = "sifive,fu540-c000-pdma"; >>> + reg = <0x0 0x3000000 0x0 0x8000>; >>> + interrupt-parent = <&plic>; >>> + interrupts = <23 24 25 26 27 28 29 30>; >>> + #dma-cells = <1>; >>> + }; >>> + >>> + refclk: refclk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <600000000>; >>> + clock-output-names = "msspllclk"; >>> + }; >>> + >>> + clkcfg: clkcfg@20002000 { >>> + compatible = "microchip,pfsoc-clkcfg"; >>> + reg = <0x0 0x20002000 0x0 0x1000>; >>> + reg-names = "mss_sysreg"; >>> + clocks = <&refclk>; >>> + #clock-cells = <1>; >>> + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; >>> + }; >>> + H ow about doing something like > clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", /* 0 -4 */ > "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", /* 5-9 */ this means we can easily work out what clocks are in which index As per the previos email, I'd leave these all populated as coming back and adding ones later is just going to be a pain with merge conflicts. -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius https://www.codethink.co.uk/privacy.html
On Thu, Oct 29, 2020 at 6:42 PM Ben Dooks <ben.dooks@codethink.co.uk> wrote: > > On 28/10/2020 23:27, Atish Patra wrote: > > Add initial DTS for Microchip ICICLE board having only > > essential devcies (clocks, sdhci, ethernet, serial, etc). > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > --- > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > 3 files changed, 316 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > > index ca1f8cbd78c0..3ea94ea0a18a 100644 > > --- a/arch/riscv/boot/dts/Makefile > > +++ b/arch/riscv/boot/dts/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > subdir-y += sifive > > subdir-y += kendryte > > +subdir-y += microchip > > > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > > new file mode 100644 > > index 000000000000..55ad77521304 > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/Makefile > > @@ -0,0 +1,2 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > new file mode 100644 > > index 000000000000..5848920af55c > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > @@ -0,0 +1,313 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* Copyright (c) 2020 Microchip Technology Inc */ > > + > > +/dts-v1/; > > + > > +/* Clock frequency (in Hz) of the rtcclk */ > > +#define RTCCLK_FREQ 1000000 > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "Microchip PolarFire-SoC"; > > + compatible = "microchip,polarfire-soc"; > > + > > + chosen { > > + stdout-path = &serial0; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + timebase-frequency = <RTCCLK_FREQ>; > > + > > + cpu@0 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <128>; > > + i-cache-size = <16384>; > > + reg = <0>; > > + riscv,isa = "rv64imac"; > > + status = "disabled"; > > + > > + cpu0_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@1 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <1>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu1_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@2 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <2>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu2_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@3 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <3>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu3_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@4 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <4>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + cpu4_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x0 0x80000000 0x0 0x40000000>; > > + clocks = <&clkcfg 26>; > > + }; > > U-boot doesn't seem to be updating this properly. > > The board should have 2GiB, confirmed by looking at the device's > chip markings. We only see 1GiB memory. The 0x80000000 bus window > is only capable of dealing with 1GiB memory. The higher 64-bit one > can have 16GiB mapped. > > Do we need a second node for the second GiB of memory? > > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + ranges; > > + > > + cache-controller@2010000 { > > + compatible = "sifive,fu540-c000-ccache", "cache"; > > + cache-block-size = <64>; > > + cache-level = <2>; > > + cache-sets = <1024>; > > + cache-size = <2097152>; > > + cache-unified; > > + interrupt-parent = <&plic>; > > + interrupts = <1 2 3>; > > + reg = <0x0 0x2010000 0x0 0x1000>; > > + }; > > + > > + clint@2000000 { > > + compatible = "riscv,clint0"; > > + reg = <0x0 0x2000000 0x0 0xC000>; > > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > > + &cpu1_intc 3 &cpu1_intc 7 > > + &cpu2_intc 3 &cpu2_intc 7 > > + &cpu3_intc 3 &cpu3_intc 7 > > + &cpu4_intc 3 &cpu4_intc 7>; > > + }; > > + > > + plic: interrupt-controller@c000000 { > > + #interrupt-cells = <1>; > > + compatible = "sifive,plic-1.0.0"; > > + reg = <0x0 0xc000000 0x0 0x4000000>; > > + riscv,ndev = <53>; > > + interrupt-controller; > > + interrupts-extended = <&cpu0_intc 11 > > + &cpu1_intc 11 &cpu1_intc 9 > > + &cpu2_intc 11 &cpu2_intc 9 > > + &cpu3_intc 11 &cpu3_intc 9 > > + &cpu4_intc 11 &cpu4_intc 9>; > > + }; > > + > > + dma@3000000 { > > + compatible = "sifive,fu540-c000-pdma"; > > + reg = <0x0 0x3000000 0x0 0x8000>; > > + interrupt-parent = <&plic>; > > + interrupts = <23 24 25 26 27 28 29 30>; > > + #dma-cells = <1>; > > + }; > > + > > + refclk: refclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <600000000>; > > + clock-output-names = "msspllclk"; > > + }; > > + > > + clkcfg: clkcfg@20002000 { > > + compatible = "microchip,pfsoc-clkcfg"; > > + reg = <0x0 0x20002000 0x0 0x1000>; > > + reg-names = "mss_sysreg"; > > + clocks = <&refclk>; > > + #clock-cells = <1>; > > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; > > Any chance of making this list multi-line, it is difficult to read as-is. Besides the multi-line issue, I believe the clock-output-names should all have lower case names. > > > + }; > > + > > + serial0: serial@20000000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20000000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <90>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 8>; > > + status = "okay"; > > + }; > > + > > + serial1: serial@20100000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20100000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <91>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 9>; > > + status = "okay"; > > + }; > > + > > + serial2: serial@20102000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20102000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <92>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 10>; > > + status = "okay"; > > + }; > > + > > + serial3: serial@20104000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20104000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <93>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 11>; > > + status = "okay"; > > + }; > > + > > + sdcard: sdhc@20008000 { > > + compatible = "cdns,sd4hc"; > > + reg = <0x0 0x20008000 0x0 0x1000>; > > + interrupt-parent = <&plic>; > > + interrupts = <88>; > > + pinctrl-names = "default"; > > + clocks = <&clkcfg 6>; > > + bus-width = <4>; > > + disable-wp; > > + no-1-8-v; > > + cap-mmc-highspeed; > > + cap-sd-highspeed; > > + card-detect-delay = <200>; > > + sd-uhs-sdr12; > > + sd-uhs-sdr25; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + max-frequency = <200000000>; > > + status = "okay"; > > + }; > > Given eMMC is the default device, shouldn't that be default for the > device tree too? Even if not, having the emmc node here would be a > good thing as it is different to the SD node. > > > + > > + emac1: ethernet@20112000 { > > + compatible = "cdns,macb"; > > + reg = <0x0 0x20112000 0x0 0x2000>; > > + interrupt-parent = <&plic>; > > + interrupts = <70 71 72 73>; > > + mac-address = [56 34 12 00 FC 00]; > > + phy-mode = "sgmii"; > > + clocks = <&clkcfg 5>, <&clkcfg 2>; > > + clock-names = "pclk", "hclk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + phy1: ethernet-phy@9 { > > + reg = <9>; > > + ti,fifo-depth = <0x01>; > > + }; > > + }; > > Aren't there two ethernet ports on the board? > > Also, at the moment u-boot is not filling the MAC address parameter > in so we've got at two boards on the network with the same MAC until > we override it in the device tree for the second. > > > + > > + uio_axi_lsram@2030000000 { > > + compatible = "generic-uio"; > > + reg = <0x20 0x30000000 0 0x80000000 >; > > + status = "okay"; > > + }; > > + }; > > +}; Regards, Bin
On Wed, 28 Oct 2020 16:27:58 PDT (-0700), Atish Patra wrote: > Add initial DTS for Microchip ICICLE board having only > essential devcies (clocks, sdhci, ethernet, serial, etc). This fails `make dtbs_check`. The fu540 fails too, so I guess it's not exactly fair, though. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > 3 files changed, 316 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ca1f8cbd78c0..3ea94ea0a18a 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > subdir-y += sifive > subdir-y += kendryte > +subdir-y += microchip > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > new file mode 100644 > index 000000000000..55ad77521304 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > new file mode 100644 > index 000000000000..5848920af55c > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > @@ -0,0 +1,313 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +/* Clock frequency (in Hz) of the rtcclk */ > +#define RTCCLK_FREQ 1000000 > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC"; > + compatible = "microchip,polarfire-soc"; > + > + chosen { > + stdout-path = &serial0; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = <RTCCLK_FREQ>; > + > + cpu@0 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <128>; > + i-cache-size = <16384>; > + reg = <0>; > + riscv,isa = "rv64imac"; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@1 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <1>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@2 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <2>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@3 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <3>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@4 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <4>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + cpu4_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; > + clocks = <&clkcfg 26>; > + }; > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + cache-controller@2010000 { > + compatible = "sifive,fu540-c000-ccache", "cache"; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <1024>; > + cache-size = <2097152>; > + cache-unified; > + interrupt-parent = <&plic>; > + interrupts = <1 2 3>; > + reg = <0x0 0x2010000 0x0 0x1000>; > + }; > + > + clint@2000000 { > + compatible = "riscv,clint0"; > + reg = <0x0 0x2000000 0x0 0xC000>; > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > + &cpu1_intc 3 &cpu1_intc 7 > + &cpu2_intc 3 &cpu2_intc 7 > + &cpu3_intc 3 &cpu3_intc 7 > + &cpu4_intc 3 &cpu4_intc 7>; > + }; > + > + plic: interrupt-controller@c000000 { > + #interrupt-cells = <1>; > + compatible = "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + riscv,ndev = <53>; > + interrupt-controller; > + interrupts-extended = <&cpu0_intc 11 > + &cpu1_intc 11 &cpu1_intc 9 > + &cpu2_intc 11 &cpu2_intc 9 > + &cpu3_intc 11 &cpu3_intc 9 > + &cpu4_intc 11 &cpu4_intc 9>; > + }; > + > + dma@3000000 { > + compatible = "sifive,fu540-c000-pdma"; > + reg = <0x0 0x3000000 0x0 0x8000>; > + interrupt-parent = <&plic>; > + interrupts = <23 24 25 26 27 28 29 30>; > + #dma-cells = <1>; > + }; > + > + refclk: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; > + > + clkcfg: clkcfg@20002000 { > + compatible = "microchip,pfsoc-clkcfg"; > + reg = <0x0 0x20002000 0x0 0x1000>; > + reg-names = "mss_sysreg"; > + clocks = <&refclk>; > + #clock-cells = <1>; > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; > + }; > + > + serial0: serial@20000000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20000000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <90>; > + current-speed = <115200>; > + clocks = <&clkcfg 8>; > + status = "okay"; > + }; > + > + serial1: serial@20100000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20100000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <91>; > + current-speed = <115200>; > + clocks = <&clkcfg 9>; > + status = "okay"; > + }; > + > + serial2: serial@20102000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20102000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <92>; > + current-speed = <115200>; > + clocks = <&clkcfg 10>; > + status = "okay"; > + }; > + > + serial3: serial@20104000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20104000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <93>; > + current-speed = <115200>; > + clocks = <&clkcfg 11>; > + status = "okay"; > + }; > + > + sdcard: sdhc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + disable-wp; > + no-1-8-v; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + status = "okay"; > + }; > + > + emac1: ethernet@20112000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20112000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <70 71 72 73>; > + mac-address = [56 34 12 00 FC 00]; > + phy-mode = "sgmii"; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + clock-names = "pclk", "hclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy1: ethernet-phy@9 { > + reg = <9>; > + ti,fifo-depth = <0x01>; > + }; > + }; > + > + uio_axi_lsram@2030000000 { > + compatible = "generic-uio"; > + reg = <0x20 0x30000000 0 0x80000000 >; > + status = "okay"; > + }; > + }; > +};
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile index ca1f8cbd78c0..3ea94ea0a18a 100644 --- a/arch/riscv/boot/dts/Makefile +++ b/arch/riscv/boot/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 subdir-y += sifive subdir-y += kendryte +subdir-y += microchip obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile new file mode 100644 index 000000000000..55ad77521304 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts new file mode 100644 index 000000000000..5848920af55c --- /dev/null +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (c) 2020 Microchip Technology Inc */ + +/dts-v1/; + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire-SoC"; + compatible = "microchip,polarfire-soc"; + + chosen { + stdout-path = &serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <RTCCLK_FREQ>; + + cpu@0 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + status = "disabled"; + + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@1 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + tlb-split; + status = "okay"; + + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@2 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + tlb-split; + status = "okay"; + + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@3 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + tlb-split; + status = "okay"; + + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@4 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + tlb-split; + status = "okay"; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + clocks = <&clkcfg 26>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic>; + interrupts = <1 2 3>; + reg = <0x0 0x2010000 0x0 0x1000>; + }; + + clint@2000000 { + compatible = "riscv,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7 + &cpu2_intc 3 &cpu2_intc 7 + &cpu3_intc 3 &cpu3_intc 7 + &cpu4_intc 3 &cpu4_intc 7>; + }; + + plic: interrupt-controller@c000000 { + #interrupt-cells = <1>; + compatible = "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + riscv,ndev = <53>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 11 + &cpu1_intc 11 &cpu1_intc 9 + &cpu2_intc 11 &cpu2_intc 9 + &cpu3_intc 11 &cpu3_intc 9 + &cpu4_intc 11 &cpu4_intc 9>; + }; + + dma@3000000 { + compatible = "sifive,fu540-c000-pdma"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic>; + interrupts = <23 24 25 26 27 28 29 30>; + #dma-cells = <1>; + }; + + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "msspllclk"; + }; + + clkcfg: clkcfg@20002000 { + compatible = "microchip,pfsoc-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>; + reg-names = "mss_sysreg"; + clocks = <&refclk>; + #clock-cells = <1>; + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; + }; + + serial0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <90>; + current-speed = <115200>; + clocks = <&clkcfg 8>; + status = "okay"; + }; + + serial1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <91>; + current-speed = <115200>; + clocks = <&clkcfg 9>; + status = "okay"; + }; + + serial2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <92>; + current-speed = <115200>; + clocks = <&clkcfg 10>; + status = "okay"; + }; + + serial3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <93>; + current-speed = <115200>; + clocks = <&clkcfg 11>; + status = "okay"; + }; + + sdcard: sdhc@20008000 { + compatible = "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + pinctrl-names = "default"; + clocks = <&clkcfg 6>; + bus-width = <4>; + disable-wp; + no-1-8-v; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + status = "okay"; + }; + + emac1: ethernet@20112000 { + compatible = "cdns,macb"; + reg = <0x0 0x20112000 0x0 0x2000>; + interrupt-parent = <&plic>; + interrupts = <70 71 72 73>; + mac-address = [56 34 12 00 FC 00]; + phy-mode = "sgmii"; + clocks = <&clkcfg 5>, <&clkcfg 2>; + clock-names = "pclk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@9 { + reg = <9>; + ti,fifo-depth = <0x01>; + }; + }; + + uio_axi_lsram@2030000000 { + compatible = "generic-uio"; + reg = <0x20 0x30000000 0 0x80000000 >; + status = "okay"; + }; + }; +};
Add initial DTS for Microchip ICICLE board having only essential devcies (clocks, sdhci, ethernet, serial, etc). Signed-off-by: Atish Patra <atish.patra@wdc.com> --- arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/microchip/Makefile | 2 + .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ 3 files changed, 316 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/Makefile create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts