| Message ID | 20201028221427.22968-3-kabel@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | Support for RollBall 10G copper SFP modules | expand |
On Wed, Oct 28, 2020 at 11:14:24PM +0100, Marek Behún wrote: > Some SFPs may contain an internal PHY which may in some cases want to > connect with the host interface in 1000base-x/2500base-x mode. > Do not fail if such PHY is being attached in one of these PHY interface > modes. > > Signed-off-by: Marek Behún <kabel@kernel.org> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Russell King <rmk+kernel@armlinux.org.uk> > --- > drivers/net/phy/phylink.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c > index 5d8c015bc9f2..52954f12ca5e 100644 > --- a/drivers/net/phy/phylink.c > +++ b/drivers/net/phy/phylink.c > @@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, > { > if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || > (pl->cfg_link_an_mode == MLO_AN_INBAND && > - phy_interface_mode_is_8023z(interface)))) > + phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) > return -EINVAL; > > if (pl->phydev) I think also changing phylink_sfp_config() too since that check is no longer relevent - although it doesn't actually end up being effective today. So, might as well be removed along with the above change. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5d8c015bc9f2..52954f12ca5e 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, { if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || (pl->cfg_link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(interface)))) + phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) return -EINVAL; if (pl->phydev)
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/phylink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)