Message ID | 20200115184415.1726953-1-andres@anarazel.de |
---|---|
State | Accepted |
Commit | e78acf7efebff9184ad4add02b62a1f486a8cde8 |
Headers | show |
Series | thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH. | expand |
Hi, On 2020-01-16 11:41:34 -0800, Srinivas Pandruvada wrote: > On Thu, 2020-01-16 at 10:42 -0800, Andres Freund wrote: > > Hi, > > > > On 2020-01-16 05:53:13 -0800, Srinivas Pandruvada wrote: > > > On Wed, 2020-01-15 at 10:44 -0800, Andres Freund wrote: > > > > I noticed that I couldn't read the PCH temperature on my > > > > workstation > > > > (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but > > > > had to > > > > go > > > > through IPMI. Looking at the data sheet, it looks to me like the > > > > existing intel PCH thermal driver should work without changes for > > > > Lewisburg. > > > Does the temperature reading match with what you read via IPMI? > > > > It does: > > > > root@awork3:~# ipmitool sdr|grep ^PCH > > PCH Temp | 58 degrees C | ok > > > > andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/type > > pch_lewisburg > > andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp > > 58000 > > > > And if I generate some load, it rises for both: > > root@awork3:~# ipmitool sdr|grep ^PCH > > PCH Temp | 60 degrees C | ok > > andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp > > 60000 > > > Thanks for the test. > > Rui can add his ACK. Ping? Looks like this got lost somewhere? Greetings, Andres Freund
On 28/10/2020 21:21, Andres Freund wrote: > Hi, > > On 2020-01-16 11:41:34 -0800, Srinivas Pandruvada wrote: >> On Thu, 2020-01-16 at 10:42 -0800, Andres Freund wrote: >>> Hi, >>> >>> On 2020-01-16 05:53:13 -0800, Srinivas Pandruvada wrote: >>>> On Wed, 2020-01-15 at 10:44 -0800, Andres Freund wrote: >>>>> I noticed that I couldn't read the PCH temperature on my >>>>> workstation >>>>> (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but >>>>> had to >>>>> go >>>>> through IPMI. Looking at the data sheet, it looks to me like the >>>>> existing intel PCH thermal driver should work without changes for >>>>> Lewisburg. >>>> Does the temperature reading match with what you read via IPMI? >>> >>> It does: >>> >>> root@awork3:~# ipmitool sdr|grep ^PCH >>> PCH Temp | 58 degrees C | ok >>> >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/type >>> pch_lewisburg >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp >>> 58000 >>> >>> And if I generate some load, it rises for both: >>> root@awork3:~# ipmitool sdr|grep ^PCH >>> PCH Temp | 60 degrees C | ok >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp >>> 60000 >>> >> Thanks for the test. >> >> Rui can add his ACK. > > Ping? Looks like this got lost somewhere? Waiting for Rui's ack :) -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
On 28/10/2020 21:21, Andres Freund wrote: > Hi, > > On 2020-01-16 11:41:34 -0800, Srinivas Pandruvada wrote: >> On Thu, 2020-01-16 at 10:42 -0800, Andres Freund wrote: >>> Hi, >>> >>> On 2020-01-16 05:53:13 -0800, Srinivas Pandruvada wrote: >>>> On Wed, 2020-01-15 at 10:44 -0800, Andres Freund wrote: >>>>> I noticed that I couldn't read the PCH temperature on my >>>>> workstation >>>>> (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but >>>>> had to >>>>> go >>>>> through IPMI. Looking at the data sheet, it looks to me like the >>>>> existing intel PCH thermal driver should work without changes for >>>>> Lewisburg. >>>> Does the temperature reading match with what you read via IPMI? >>> >>> It does: >>> >>> root@awork3:~# ipmitool sdr|grep ^PCH >>> PCH Temp | 58 degrees C | ok >>> >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/type >>> pch_lewisburg >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp >>> 58000 >>> >>> And if I generate some load, it rises for both: >>> root@awork3:~# ipmitool sdr|grep ^PCH >>> PCH Temp | 60 degrees C | ok >>> andres@awork3:~$ cat /sys/class/thermal/thermal_zone0/temp >>> 60000 >>> >> Thanks for the test. >> >> Rui can add his ACK. > > Ping? Looks like this got lost somewhere? It does no longer apply, is it possible to do a respin ? Thanks -- Daniel -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Hi,
On 2020-11-12 12:34:08 +0100, Daniel Lezcano wrote:
> It does no longer apply, is it possible to do a respin ?
Yep, sent.
Thanks,
- Andres
On Fri, 2020-11-13 at 12:49 -0800, Andres Freund wrote: > I noticed that I couldn't read the PCH temperature on my workstation > (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to > go > through IPMI. Looking at the data sheet, it looks to me like the > existing intel PCH thermal driver should work without changes for > Lewisburg. > > I suspect there's some other PCI IDs missing. But I hope somebody at > Intel would have an easier time figuring that out than I... > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > Cc: Tushar Dave <tushar.n.dave@intel.com> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: linux-pm@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Link: > https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/ > Signed-off-by: Andres Freund <andres@anarazel.de> Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> > --- > drivers/thermal/intel/intel_pch_thermal.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/thermal/intel/intel_pch_thermal.c > b/drivers/thermal/intel/intel_pch_thermal.c > index 3b813ebb6ca1..7785e05f46f0 100644 > --- a/drivers/thermal/intel/intel_pch_thermal.c > +++ b/drivers/thermal/intel/intel_pch_thermal.c > @@ -26,6 +26,7 @@ > #define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */ > #define PCH_THERMAL_DID_CNL_LP 0x02F9 /* CNL-LP PCH */ > #define PCH_THERMAL_DID_CML_H 0X06F9 /* CML-H PCH */ > +#define PCH_THERMAL_DID_LWB 0xA1B1 /* Lewisburg PCH */ > > /* Wildcat Point-LP PCH Thermal registers */ > #define WPT_TEMP 0x0000 /* Temperature */ > @@ -276,6 +277,7 @@ enum board_ids { > board_skl, > board_cnl, > board_cml, > + board_lwb, > }; > > static const struct board_info { > @@ -301,7 +303,11 @@ static const struct board_info { > [board_cml] = { > .name = "pch_cometlake", > .ops = &pch_dev_ops_wpt, > - } > + }, > + [board_lwb] = { > + .name = "pch_lewisburg", > + .ops = &pch_dev_ops_wpt, > + }, > }; > > static int intel_pch_thermal_probe(struct pci_dev *pdev, > @@ -415,6 +421,8 @@ static const struct pci_device_id > intel_pch_thermal_id[] = { > .driver_data = board_cnl, }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H), > .driver_data = board_cml, }, > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), > + .driver_data = board_lwb, }, > { 0, }, > }; > MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
On 13/11/2020 21:49, Andres Freund wrote: > I noticed that I couldn't read the PCH temperature on my workstation > (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to go > through IPMI. Looking at the data sheet, it looks to me like the > existing intel PCH thermal driver should work without changes for > Lewisburg. > > I suspect there's some other PCI IDs missing. But I hope somebody at > Intel would have an easier time figuring that out than I... > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > Cc: Tushar Dave <tushar.n.dave@intel.com> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: linux-pm@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Link: https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/ > Signed-off-by: Andres Freund <andres@anarazel.de> > --- Applied, thanks -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Hi, On 2020-11-16 10:28:04 +0100, Daniel Lezcano wrote: > On 13/11/2020 21:49, Andres Freund wrote: > > I noticed that I couldn't read the PCH temperature on my workstation > > (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to go > > through IPMI. Looking at the data sheet, it looks to me like the > > existing intel PCH thermal driver should work without changes for > > Lewisburg. > > > > I suspect there's some other PCI IDs missing. But I hope somebody at > > Intel would have an easier time figuring that out than I... > > > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > > Cc: Tushar Dave <tushar.n.dave@intel.com> > > Cc: Zhang Rui <rui.zhang@intel.com> > > Cc: linux-pm@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Link: https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/ > > Signed-off-by: Andres Freund <andres@anarazel.de> > > --- > > Applied, thanks Thanks for review and applying. Greetings, Andres Freund
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c index 4f0bb8f502e1..1f3ff0d489ef 100644 --- a/drivers/thermal/intel/intel_pch_thermal.c +++ b/drivers/thermal/intel/intel_pch_thermal.c @@ -23,6 +23,7 @@ #define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */ #define PCH_THERMAL_DID_CNL 0x9Df9 /* CNL PCH */ #define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */ +#define PCH_THERMAL_DID_LWB 0xA1B1 /* Lewisburg PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000 /* Temperature */ @@ -272,6 +273,7 @@ enum board_ids { board_wpt, board_skl, board_cnl, + board_lwb, }; static const struct board_info { @@ -294,6 +296,10 @@ static const struct board_info { .name = "pch_cannonlake", .ops = &pch_dev_ops_wpt, }, + [board_lwb] = { + .name = "pch_lewisburg", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev, @@ -398,6 +404,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cnl, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H), .driver_data = board_cnl, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), + .driver_data = board_lwb, }, { 0, }, }; MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
I noticed that I couldn't read the PCH temperature on my workstation (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to go through IPMI. Looking at the data sheet, it looks to me like the existing intel PCH thermal driver should work without changes for Lewisburg. I suspect there's some other PCI id's missing. But I hope somebody at Intel would have an easier time figuring that out than I... Signed-off-by: Andres Freund <andres@anarazel.de> --- drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++ 1 file changed, 8 insertions(+)