| Message ID | 20201019085717.32413-2-dylan_hung@aspeedtech.com |
|---|---|
| State | New |
| Headers | show |
| Series | fix ftgmac100 issues on aspeed soc | expand |
On Mon, 2020-10-19 at 16:57 +0800, Dylan Hung wrote: > These rules must be followed when accessing the TX descriptor: > > 1. A TX descriptor is "cleanable" only when its value is non-zero > and the owner bit is set to "software" Can you elaborate ? What is the point of that change ? The owner bit should be sufficient, why do we need to check other fields ? > 2. A TX descriptor is "writable" only when its value is zero > regardless the edotr mask. Again, why is that ? Can you elaborate ? What race are you trying to address here ? Cheers, Ben. > Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors") > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> > Signed-off-by: Joel Stanley <joel@jms.id.au> > --- > drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > b/drivers/net/ethernet/faraday/ftgmac100.c > index 00024dd41147..7cacbe4aecb7 100644 > --- a/drivers/net/ethernet/faraday/ftgmac100.c > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > @@ -647,6 +647,9 @@ static bool ftgmac100_tx_complete_packet(struct > ftgmac100 *priv) > if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) > return false; > > + if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0) > + return false; > + > skb = priv->tx_skbs[pointer]; > netdev->stats.tx_packets++; > netdev->stats.tx_bytes += skb->len; > @@ -756,6 +759,9 @@ static netdev_tx_t > ftgmac100_hard_start_xmit(struct sk_buff *skb, > pointer = priv->tx_pointer; > txdes = first = &priv->txdes[pointer]; > > + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) > + goto drop; > + > /* Setup it up with the packet head. Don't write the head to > the > * ring just yet > */ > @@ -787,6 +793,10 @@ static netdev_tx_t > ftgmac100_hard_start_xmit(struct sk_buff *skb, > /* Setup descriptor */ > priv->tx_skbs[pointer] = skb; > txdes = &priv->txdes[pointer]; > + > + if (le32_to_cpu(txdes->txdes0) & ~priv- > >txdes0_edotr_mask) > + goto dma_err; > + > ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer); > ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN; > ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
On Mon, 19 Oct 2020 at 23:20, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote: > > On Mon, 2020-10-19 at 16:57 +0800, Dylan Hung wrote: > > These rules must be followed when accessing the TX descriptor: > > > > 1. A TX descriptor is "cleanable" only when its value is non-zero > > and the owner bit is set to "software" > > Can you elaborate ? What is the point of that change ? The owner bit > should be sufficient, why do we need to check other fields ? I would like Dylan to clarify too. The datasheet has a footnote below the descriptor layout: - TXDES#0: Bits 27 ~ 14 are valid only when FTS = 1 - TXDES#1: Bits 31 ~ 0 are valid only when FTS = 1 So the ownership bit (31) is not valid unless FTS is set. However, this isn't what his patch does. It adds checks for EDOTR. > > > 2. A TX descriptor is "writable" only when its value is zero > > regardless the edotr mask. > > Again, why is that ? Can you elaborate ? What race are you trying to > address here ? > > Cheers, > Ben. > > > Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors") > > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> > > Signed-off-by: Joel Stanley <joel@jms.id.au> > > --- > > drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > > b/drivers/net/ethernet/faraday/ftgmac100.c > > index 00024dd41147..7cacbe4aecb7 100644 > > --- a/drivers/net/ethernet/faraday/ftgmac100.c > > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > > @@ -647,6 +647,9 @@ static bool ftgmac100_tx_complete_packet(struct > > ftgmac100 *priv) > > if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) > > return false; > > > > + if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0) > > + return false; > > + > > skb = priv->tx_skbs[pointer]; > > netdev->stats.tx_packets++; > > netdev->stats.tx_bytes += skb->len; > > @@ -756,6 +759,9 @@ static netdev_tx_t > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > pointer = priv->tx_pointer; > > txdes = first = &priv->txdes[pointer]; > > > > + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) > > + goto drop; > > + > > /* Setup it up with the packet head. Don't write the head to > > the > > * ring just yet > > */ > > @@ -787,6 +793,10 @@ static netdev_tx_t > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > /* Setup descriptor */ > > priv->tx_skbs[pointer] = skb; > > txdes = &priv->txdes[pointer]; > > + > > + if (le32_to_cpu(txdes->txdes0) & ~priv- > > >txdes0_edotr_mask) > > + goto dma_err; > > + > > ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer); > > ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN; > > ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len); >
On Tue, 2020-10-20 at 04:13 +0000, Joel Stanley wrote: > On Mon, 19 Oct 2020 at 23:20, Benjamin Herrenschmidt > <benh@kernel.crashing.org> wrote: > > > > On Mon, 2020-10-19 at 16:57 +0800, Dylan Hung wrote: > > > These rules must be followed when accessing the TX descriptor: > > > > > > 1. A TX descriptor is "cleanable" only when its value is non-zero > > > and the owner bit is set to "software" > > > > Can you elaborate ? What is the point of that change ? The owner > > bit > > should be sufficient, why do we need to check other fields ? > > I would like Dylan to clarify too. The datasheet has a footnote below > the descriptor layout: > > - TXDES#0: Bits 27 ~ 14 are valid only when FTS = 1 > - TXDES#1: Bits 31 ~ 0 are valid only when FTS = 1 > > So the ownership bit (31) is not valid unless FTS is set. However, > this isn't what his patch does. It adds checks for EDOTR. No I think it adds a check for everything except EDOTR which just marks the end of ring and needs to be ignored in the comparison. That said, we do need a better explanation. One potential bug I did find by looking at my code however is: static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv) { struct net_device *netdev = priv->netdev; struct ftgmac100_txdes *txdes; struct sk_buff *skb; unsigned int pointer; u32 ctl_stat; pointer = priv->tx_clean_pointer; txdes = &priv->txdes[pointer]; ctl_stat = le32_to_cpu(txdes->txdes0); if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) return false; skb = priv->tx_skbs[pointer]; netdev->stats.tx_packets++; netdev->stats.tx_bytes += skb->len; ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat); txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask); ^^^^ There should probably be an smp_wmb() here to ensure that all the above stores are visible before the tx clean pointer is updated. priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer); return true; } Similarly we probablu should have one before setting tx_pointer in start_xmit(). As for the read side of this, I'm not 100% sure, I'll have to think more about it, it *think* the existing barriers are sufficient at first sight. Cheers, Ben. > > > > > 2. A TX descriptor is "writable" only when its value is zero > > > regardless the edotr mask. > > > > Again, why is that ? Can you elaborate ? What race are you trying > > to > > address here ? > > > > Cheers, > > Ben. > > > > > Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors") > > > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> > > > Signed-off-by: Joel Stanley <joel@jms.id.au> > > > --- > > > drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++ > > > 1 file changed, 10 insertions(+) > > > > > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > > > b/drivers/net/ethernet/faraday/ftgmac100.c > > > index 00024dd41147..7cacbe4aecb7 100644 > > > --- a/drivers/net/ethernet/faraday/ftgmac100.c > > > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > > > @@ -647,6 +647,9 @@ static bool > > > ftgmac100_tx_complete_packet(struct > > > ftgmac100 *priv) > > > if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) > > > return false; > > > > > > + if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0) > > > + return false; > > > + > > > skb = priv->tx_skbs[pointer]; > > > netdev->stats.tx_packets++; > > > netdev->stats.tx_bytes += skb->len; > > > @@ -756,6 +759,9 @@ static netdev_tx_t > > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > > pointer = priv->tx_pointer; > > > txdes = first = &priv->txdes[pointer]; > > > > > > + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) > > > + goto drop; > > > + > > > /* Setup it up with the packet head. Don't write the head > > > to > > > the > > > * ring just yet > > > */ > > > @@ -787,6 +793,10 @@ static netdev_tx_t > > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > > /* Setup descriptor */ > > > priv->tx_skbs[pointer] = skb; > > > txdes = &priv->txdes[pointer]; > > > + > > > + if (le32_to_cpu(txdes->txdes0) & ~priv- > > > > txdes0_edotr_mask) > > > > > > + goto dma_err; > > > + > > > ctl_stat = ftgmac100_base_tx_ctlstat(priv, > > > pointer); > > > ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN; > > > ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
On Tue, 20 Oct 2020 at 06:23, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote: > > On Tue, 2020-10-20 at 04:13 +0000, Joel Stanley wrote: > > On Mon, 19 Oct 2020 at 23:20, Benjamin Herrenschmidt > > <benh@kernel.crashing.org> wrote: > > > > > > On Mon, 2020-10-19 at 16:57 +0800, Dylan Hung wrote: > > > > These rules must be followed when accessing the TX descriptor: > > > > > > > > 1. A TX descriptor is "cleanable" only when its value is non-zero > > > > and the owner bit is set to "software" > > > > > > Can you elaborate ? What is the point of that change ? The owner > > > bit > > > should be sufficient, why do we need to check other fields ? > > > > I would like Dylan to clarify too. The datasheet has a footnote below > > the descriptor layout: > > > > - TXDES#0: Bits 27 ~ 14 are valid only when FTS = 1 > > - TXDES#1: Bits 31 ~ 0 are valid only when FTS = 1 > > > > So the ownership bit (31) is not valid unless FTS is set. However, > > this isn't what his patch does. It adds checks for EDOTR. > > No I think it adds a check for everything except EDOTR which just marks > the end of ring and needs to be ignored in the comparison. Of course. I missed the invert. I did some testing with just this patch (and "[4/4] ftgmac100: Restart MAC HW once") from Dylan. It seemed to resolve the hang, but there were occasional retries. Putting in some tracing I only hit the condition in ftgmac100_tx_complete_packet, never in ftgmac100_hard_start_xmit. > That said, we do need a better explanation. > > One potential bug I did find by looking at my code however is: > > static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv) > { > struct net_device *netdev = priv->netdev; > struct ftgmac100_txdes *txdes; > struct sk_buff *skb; > unsigned int pointer; > u32 ctl_stat; > > pointer = priv->tx_clean_pointer; > txdes = &priv->txdes[pointer]; > > ctl_stat = le32_to_cpu(txdes->txdes0); > if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) > return false; > > skb = priv->tx_skbs[pointer]; > netdev->stats.tx_packets++; > netdev->stats.tx_bytes += skb->len; > ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat); > txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask); > > ^^^^ There should probably be an smp_wmb() here to ensure that all the above > stores are visible before the tx clean pointer is updated. > > priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer); > > return true; > } > > Similarly we probablu should have one before setting tx_pointer in start_xmit(). I added the two smp_wmb you suggested (with only 4/4 applied). This did the trick; iperf on a gigabit link is running well with no retries. diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 331d4bdd4a67..15cdfeb135b0 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -653,6 +653,11 @@ static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv) ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat); txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask); + /* Ensure the descriptor config is visible before setting the tx + * pointer. + */ + smp_wmb(); + priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer); return true; @@ -806,6 +811,11 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb, dma_wmb(); first->txdes0 = cpu_to_le32(f_ctl_stat); + /* Ensure the descriptor config is visible before setting the tx + * pointer. + */ + smp_wmb(); + /* Update next TX pointer */ priv->tx_pointer = pointer; I left the test running while writing this email and I did start to see some retries. I'm not sure if that's because my laptop is one of the test machines, or if we have another issue. I will do some further testing over night. Cheers, Joel > > As for the read side of this, I'm not 100% sure, I'll have to think more about > it, it *think* the existing barriers are sufficient at first sight. > > Cheers, > Ben. > > > > > > > > 2. A TX descriptor is "writable" only when its value is zero > > > > regardless the edotr mask. > > > > > > Again, why is that ? Can you elaborate ? What race are you trying > > > to > > > address here ? > > > > > > Cheers, > > > Ben. > > > > > > > Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors") > > > > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> > > > > Signed-off-by: Joel Stanley <joel@jms.id.au> > > > > --- > > > > drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > > > > b/drivers/net/ethernet/faraday/ftgmac100.c > > > > index 00024dd41147..7cacbe4aecb7 100644 > > > > --- a/drivers/net/ethernet/faraday/ftgmac100.c > > > > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > > > > @@ -647,6 +647,9 @@ static bool > > > > ftgmac100_tx_complete_packet(struct > > > > ftgmac100 *priv) > > > > if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) > > > > return false; > > > > > > > > + if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0) > > > > + return false; > > > > + > > > > skb = priv->tx_skbs[pointer]; > > > > netdev->stats.tx_packets++; > > > > netdev->stats.tx_bytes += skb->len; > > > > @@ -756,6 +759,9 @@ static netdev_tx_t > > > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > > > pointer = priv->tx_pointer; > > > > txdes = first = &priv->txdes[pointer]; > > > > > > > > + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) > > > > + goto drop; > > > > + > > > > /* Setup it up with the packet head. Don't write the head > > > > to > > > > the > > > > * ring just yet > > > > */ > > > > @@ -787,6 +793,10 @@ static netdev_tx_t > > > > ftgmac100_hard_start_xmit(struct sk_buff *skb, > > > > /* Setup descriptor */ > > > > priv->tx_skbs[pointer] = skb; > > > > txdes = &priv->txdes[pointer]; > > > > + > > > > + if (le32_to_cpu(txdes->txdes0) & ~priv- > > > > > txdes0_edotr_mask) > > > > > > > > + goto dma_err; > > > > + > > > > ctl_stat = ftgmac100_base_tx_ctlstat(priv, > > > > pointer); > > > > ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN; > > > > ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len); >
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 00024dd41147..7cacbe4aecb7 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -647,6 +647,9 @@ static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv) if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN) return false; + if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0) + return false; + skb = priv->tx_skbs[pointer]; netdev->stats.tx_packets++; netdev->stats.tx_bytes += skb->len; @@ -756,6 +759,9 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb, pointer = priv->tx_pointer; txdes = first = &priv->txdes[pointer]; + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) + goto drop; + /* Setup it up with the packet head. Don't write the head to the * ring just yet */ @@ -787,6 +793,10 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb, /* Setup descriptor */ priv->tx_skbs[pointer] = skb; txdes = &priv->txdes[pointer]; + + if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask) + goto dma_err; + ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer); ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN; ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
These rules must be followed when accessing the TX descriptor: 1. A TX descriptor is "cleanable" only when its value is non-zero and the owner bit is set to "software" 2. A TX descriptor is "writable" only when its value is zero regardless the edotr mask. Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> --- drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++ 1 file changed, 10 insertions(+)