diff mbox series

[2/2] clk: samsung: exynos-clkout: convert to module driver

Message ID 20201001165646.32279-3-krzk@kernel.org
State New
Headers show
Series samsung: exynos: convert clkout to module driver | expand

Commit Message

Krzysztof Kozlowski Oct. 1, 2020, 4:56 p.m. UTC 
The Exynos clkout driver depends on board input clock (typically XXTI or
XUSBXTI), however on Exynos4 boards these clocks were modeled as part of
SoC clocks (Exynos4 clocks driver).  Obviously this is not proper, but
correcting it would break DT backward compatibility.

Both drivers - clkout and Exynos4 clocks - register the clock providers
with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the
Makefile clkout is behind Exynos4 clock).  It will work only if the
Exynos4 clock driver comes up before clkout.

A change in DTS adding input clock reference to Exynos4 clocks input
PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input
clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout
appeared before Exynos4 clock provider.  Since clkout depends on Exynos4
clocks and does not support deferred probe, this did not work and caused
later failure of usb3503 USB hub probe which needs clkout:

    [    5.007442] usb3503 0-0008: unable to request refclk (-517)

The Exynos clkout driver is not a critical/core clock so there is
actually no problem in instantiating it later, as a regular module.
This removes specific probe ordering and adds support for probe
deferral.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/samsung/clk-exynos-clkout.c | 198 +++++++++++++++++-------
 1 file changed, 141 insertions(+), 57 deletions(-)

Comments

Stephen Boyd Oct. 14, 2020, 2:43 a.m. UTC | #1 
Quoting Krzysztof Kozlowski (2020-10-01 09:56:46)
> diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c

> index 34ccb1d23bc3..68af082d4716 100644

> --- a/drivers/clk/samsung/clk-exynos-clkout.c

> +++ b/drivers/clk/samsung/clk-exynos-clkout.c

> @@ -28,41 +31,103 @@ struct exynos_clkout {

[...]
> +       if (!match) {

> +               dev_err(dev, "cannot match parent device\n");

> +               return -EINVAL;

> +       }

> +       variant = match->data;

> +

> +       *mux_mask = variant->mux_mask;

> +       dev_err(dev, "MATCH: %x\n", variant->mux_mask);


Is this a debug print?

> +

> +       return 0;

> +}

>
Krzysztof Kozlowski Oct. 14, 2020, 6:17 a.m. UTC | #2 
On Tue, Oct 13, 2020 at 07:43:40PM -0700, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2020-10-01 09:56:46)

> > diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c

> > index 34ccb1d23bc3..68af082d4716 100644

> > --- a/drivers/clk/samsung/clk-exynos-clkout.c

> > +++ b/drivers/clk/samsung/clk-exynos-clkout.c

> > @@ -28,41 +31,103 @@ struct exynos_clkout {

> [...]

> > +       if (!match) {

> > +               dev_err(dev, "cannot match parent device\n");

> > +               return -EINVAL;

> > +       }

> > +       variant = match->data;

> > +

> > +       *mux_mask = variant->mux_mask;

> > +       dev_err(dev, "MATCH: %x\n", variant->mux_mask);

> 

> Is this a debug print?


Debugging left over, thanks for catching this. I'll remove it.

Best regards,
Krzysztof
Sylwester Nawrocki Oct. 23, 2020, 11:42 a.m. UTC | #3 
On 10/1/20 18:56, Krzysztof Kozlowski wrote:
> The Exynos clkout driver depends on board input clock (typically XXTI or
> XUSBXTI), however on Exynos4 boards these clocks were modeled as part of
> SoC clocks (Exynos4 clocks driver).  Obviously this is not proper, but
> correcting it would break DT backward compatibility.
> 
> Both drivers - clkout and Exynos4 clocks - register the clock providers
> with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the
> Makefile clkout is behind Exynos4 clock).  It will work only if the
> Exynos4 clock driver comes up before clkout.
> 
> A change in DTS adding input clock reference to Exynos4 clocks input
> PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input
> clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout
> appeared before Exynos4 clock provider.  Since clkout depends on Exynos4
> clocks and does not support deferred probe, this did not work and caused
> later failure of usb3503 USB hub probe which needs clkout:
> 
>      [    5.007442] usb3503 0-0008: unable to request refclk (-517)
> 
> The Exynos clkout driver is not a critical/core clock so there is
> actually no problem in instantiating it later, as a regular module.
> This removes specific probe ordering and adds support for probe
> deferral.


The patch looks good to me, I have tested it on Trats2, where CLKOUT
provides master clock for the audio codec.

Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

With the debug print removed feel free to apply it through your tree.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

--
Regards,
Sylwester
Krzysztof Kozlowski Oct. 28, 2020, 10:07 p.m. UTC | #4 
On Thu, Oct 01, 2020 at 06:56:46PM +0200, Krzysztof Kozlowski wrote:
> The Exynos clkout driver depends on board input clock (typically XXTI or

> XUSBXTI), however on Exynos4 boards these clocks were modeled as part of

> SoC clocks (Exynos4 clocks driver).  Obviously this is not proper, but

> correcting it would break DT backward compatibility.

> 

> Both drivers - clkout and Exynos4 clocks - register the clock providers

> with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the

> Makefile clkout is behind Exynos4 clock).  It will work only if the

> Exynos4 clock driver comes up before clkout.

> 

> A change in DTS adding input clock reference to Exynos4 clocks input

> PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input

> clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout

> appeared before Exynos4 clock provider.  Since clkout depends on Exynos4

> clocks and does not support deferred probe, this did not work and caused

> later failure of usb3503 USB hub probe which needs clkout:

> 

>     [    5.007442] usb3503 0-0008: unable to request refclk (-517)

> 

> The Exynos clkout driver is not a critical/core clock so there is

> actually no problem in instantiating it later, as a regular module.

> This removes specific probe ordering and adds support for probe

> deferral.

> 

> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

> ---

>  drivers/clk/samsung/clk-exynos-clkout.c | 198 +++++++++++++++++-------

>  1 file changed, 141 insertions(+), 57 deletions(-)


Applied (with fixes pointed out by Sylwester).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c
index 34ccb1d23bc3..68af082d4716 100644
--- a/drivers/clk/samsung/clk-exynos-clkout.c
+++ b/drivers/clk/samsung/clk-exynos-clkout.c
@@ -9,10 +9,13 @@ 
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/syscore_ops.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
 
 #define EXYNOS_CLKOUT_NR_CLKS		1
 #define EXYNOS_CLKOUT_PARENTS		32
@@ -28,41 +31,103 @@  struct exynos_clkout {
 	struct clk_mux mux;
 	spinlock_t slock;
 	void __iomem *reg;
+	struct device_node *np;
 	u32 pmu_debug_save;
 	struct clk_hw_onecell_data data;
 };
 
-static struct exynos_clkout *clkout;
+struct exynos_clkout_variant {
+	u32 mux_mask;
+};
 
-static int exynos_clkout_suspend(void)
-{
-	clkout->pmu_debug_save = readl(clkout->reg + EXYNOS_PMU_DEBUG_REG);
+static const struct exynos_clkout_variant exynos_clkout_exynos4 = {
+	.mux_mask	= EXYNOS4_CLKOUT_MUX_MASK,
+};
 
-	return 0;
-}
+static const struct exynos_clkout_variant exynos_clkout_exynos5 = {
+	.mux_mask	= EXYNOS5_CLKOUT_MUX_MASK,
+};
 
-static void exynos_clkout_resume(void)
+static const struct of_device_id exynos_clkout_ids[] = {
+	{
+		.compatible = "samsung,exynos3250-pmu",
+		.data = &exynos_clkout_exynos4,
+	}, {
+		.compatible = "samsung,exynos4210-pmu",
+		.data = &exynos_clkout_exynos4,
+	}, {
+		.compatible = "samsung,exynos4412-pmu",
+		.data = &exynos_clkout_exynos4,
+	}, {
+		.compatible = "samsung,exynos5250-pmu",
+		.data = &exynos_clkout_exynos5,
+	}, {
+		.compatible = "samsung,exynos5410-pmu",
+		.data = &exynos_clkout_exynos5,
+	}, {
+		.compatible = "samsung,exynos5420-pmu",
+		.data = &exynos_clkout_exynos5,
+	}, {
+		.compatible = "samsung,exynos5433-pmu",
+		.data = &exynos_clkout_exynos5,
+	}, { }
+};
+
+/*
+ * Device will be instantiated as child of PMU device without its own
+ * device node.  Therefore match compatibles against parent.
+ */
+static int exynos_clkout_match_parent_dev(struct device *dev, u32 *mux_mask)
 {
-	writel(clkout->pmu_debug_save, clkout->reg + EXYNOS_PMU_DEBUG_REG);
-}
+	const struct exynos_clkout_variant *variant;
+	const struct of_device_id *match;
 
-static struct syscore_ops exynos_clkout_syscore_ops = {
-	.suspend = exynos_clkout_suspend,
-	.resume = exynos_clkout_resume,
-};
+	if (!dev->parent) {
+		dev_err(dev, "not instantiated from MFD\n");
+		return -EINVAL;
+	}
+
+	match = of_match_device(exynos_clkout_ids, dev->parent);
+	if (!match) {
+		dev_err(dev, "cannot match parent device\n");
+		return -EINVAL;
+	}
+	variant = match->data;
+
+	*mux_mask = variant->mux_mask;
+	dev_err(dev, "MATCH: %x\n", variant->mux_mask);
+
+	return 0;
+}
 
-static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
+static int exynos_clkout_probe(struct platform_device *pdev)
 {
 	const char *parent_names[EXYNOS_CLKOUT_PARENTS];
 	struct clk *parents[EXYNOS_CLKOUT_PARENTS];
-	int parent_count;
-	int ret;
-	int i;
+	struct exynos_clkout *clkout;
+	int parent_count, ret, i;
+	u32 mux_mask;
 
-	clkout = kzalloc(struct_size(clkout, data.hws, EXYNOS_CLKOUT_NR_CLKS),
-			 GFP_KERNEL);
+	clkout = devm_kzalloc(&pdev->dev,
+			      struct_size(clkout, data.hws, EXYNOS_CLKOUT_NR_CLKS),
+			      GFP_KERNEL);
 	if (!clkout)
-		return;
+		return -ENOMEM;
+
+	ret = exynos_clkout_match_parent_dev(&pdev->dev, &mux_mask);
+	if (ret)
+		return ret;
+
+	clkout->np = pdev->dev.of_node;
+	if (!clkout->np) {
+		/*
+		 * pdev->dev.parent was checked by exynos_clkout_match_parent_dev()
+		 * so it is not NULL.
+		 */
+		clkout->np = pdev->dev.parent->of_node;
+	}
+
+	platform_set_drvdata(pdev, clkout);
 
 	spin_lock_init(&clkout->slock);
 
@@ -71,7 +136,7 @@  static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
 		char name[] = "clkoutXX";
 
 		snprintf(name, sizeof(name), "clkout%d", i);
-		parents[i] = of_clk_get_by_name(node, name);
+		parents[i] = of_clk_get_by_name(clkout->np, name);
 		if (IS_ERR(parents[i])) {
 			parent_names[i] = "none";
 			continue;
@@ -82,11 +147,13 @@  static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
 	}
 
 	if (!parent_count)
-		goto free_clkout;
+		return -EINVAL;
 
-	clkout->reg = of_iomap(node, 0);
-	if (!clkout->reg)
+	clkout->reg = of_iomap(clkout->np, 0);
+	if (!clkout->reg) {
+		ret = -ENODEV;
 		goto clks_put;
+	}
 
 	clkout->gate.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG;
 	clkout->gate.bit_idx = EXYNOS_CLKOUT_DISABLE_SHIFT;
@@ -103,17 +170,17 @@  static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
 				&clk_mux_ops, NULL, NULL, &clkout->gate.hw,
 				&clk_gate_ops, CLK_SET_RATE_PARENT
 				| CLK_SET_RATE_NO_REPARENT);
-	if (IS_ERR(clkout->data.hws[0]))
+	if (IS_ERR(clkout->data.hws[0])) {
+		ret = PTR_ERR(clkout->data.hws[0]);
 		goto err_unmap;
+	}
 
 	clkout->data.num = EXYNOS_CLKOUT_NR_CLKS;
-	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clkout->data);
+	ret = of_clk_add_hw_provider(clkout->np, of_clk_hw_onecell_get, &clkout->data);
 	if (ret)
 		goto err_clk_unreg;
 
-	register_syscore_ops(&exynos_clkout_syscore_ops);
-
-	return;
+	return 0;
 
 err_clk_unreg:
 	clk_hw_unregister(clkout->data.hws[0]);
@@ -123,38 +190,55 @@  static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
 	for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i)
 		if (!IS_ERR(parents[i]))
 			clk_put(parents[i]);
-free_clkout:
-	kfree(clkout);
 
-	pr_err("%s: failed to register clkout clock\n", __func__);
+	dev_err(&pdev->dev, "failed to register clkout clock\n");
+
+	return ret;
 }
 
-/*
- * We use CLK_OF_DECLARE_DRIVER initialization method to avoid setting
- * the OF_POPULATED flag on the pmu device tree node, so later the
- * Exynos PMU platform device can be properly probed with PMU driver.
- */
+static int exynos_clkout_remove(struct platform_device *pdev)
+{
+	struct exynos_clkout *clkout = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(clkout->np);
+	clk_hw_unregister(clkout->data.hws[0]);
+	iounmap(clkout->reg);
 
-static void __init exynos4_clkout_init(struct device_node *node)
+	return 0;
+}
+static int exynos_clkout_suspend(struct device *dev)
 {
-	exynos_clkout_init(node, EXYNOS4_CLKOUT_MUX_MASK);
+	struct exynos_clkout *clkout = dev_get_drvdata(dev);
+
+	clkout->pmu_debug_save = readl(clkout->reg + EXYNOS_PMU_DEBUG_REG);
+
+	return 0;
 }
-CLK_OF_DECLARE_DRIVER(exynos4210_clkout, "samsung,exynos4210-pmu",
-		exynos4_clkout_init);
-CLK_OF_DECLARE_DRIVER(exynos4412_clkout, "samsung,exynos4412-pmu",
-		exynos4_clkout_init);
-CLK_OF_DECLARE_DRIVER(exynos3250_clkout, "samsung,exynos3250-pmu",
-		exynos4_clkout_init);
-
-static void __init exynos5_clkout_init(struct device_node *node)
+
+static int exynos_clkout_resume(struct device *dev)
 {
-	exynos_clkout_init(node, EXYNOS5_CLKOUT_MUX_MASK);
+	struct exynos_clkout *clkout = dev_get_drvdata(dev);
+
+	writel(clkout->pmu_debug_save, clkout->reg + EXYNOS_PMU_DEBUG_REG);
+
+	return 0;
 }
-CLK_OF_DECLARE_DRIVER(exynos5250_clkout, "samsung,exynos5250-pmu",
-		exynos5_clkout_init);
-CLK_OF_DECLARE_DRIVER(exynos5410_clkout, "samsung,exynos5410-pmu",
-		exynos5_clkout_init);
-CLK_OF_DECLARE_DRIVER(exynos5420_clkout, "samsung,exynos5420-pmu",
-		exynos5_clkout_init);
-CLK_OF_DECLARE_DRIVER(exynos5433_clkout, "samsung,exynos5433-pmu",
-		exynos5_clkout_init);
+
+static SIMPLE_DEV_PM_OPS(exynos_clkout_pm_ops, exynos_clkout_suspend,
+			 exynos_clkout_resume);
+
+static struct platform_driver exynos_clkout_driver = {
+	.driver = {
+		.name = "exynos-clkout",
+		.of_match_table = exynos_clkout_ids,
+		.pm = &exynos_clkout_pm_ops,
+	},
+	.probe = exynos_clkout_probe,
+	.remove = exynos_clkout_remove,
+};
+module_platform_driver(exynos_clkout_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
+MODULE_DESCRIPTION("Samsung Exynos clock output driver");
+MODULE_LICENSE("GPL");