diff mbox series

pinctrl: aspeed: Fix GPI only function problem.

Message ID 20201027084417.10137-1-billy_tsai@aspeedtech.com
State Accepted
Commit 9b92f5c51e9a41352d665f6f956bd95085a56a83
Headers show
Series pinctrl: aspeed: Fix GPI only function problem. | expand

Commit Message

Billy Tsai Oct. 27, 2020, 8:44 a.m. UTC
Some gpio pin at aspeed soc is input only and the prefix name of these
pin is "GPI" only. This patch fine-tune the condition of GPIO check from
"GPIO" to "GPI".

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Andrew Jeffery Oct. 30, 2020, 4:28 a.m. UTC | #1
Hi Billy,

On Tue, 27 Oct 2020, at 19:14, Billy Tsai wrote:
> Some gpio pin at aspeed soc is input only and the prefix name of these

> pin is "GPI" only. This patch fine-tune the condition of GPIO check from

> "GPIO" to "GPI".

> 

> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>


I'd like it if we were a bit more specific in the commit message, and even 
better if we update the comment in the code. A quick look at the code suggests 
this issue affects GPIO banks D and E in the AST2400 and AST2500, and banks T 
and U in the AST2600.

Functionally I think the patch is fine.

Cheers,

Andrew

> ---

>  drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-

>  1 file changed, 1 insertion(+), 1 deletion(-)

> 

> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c 

> b/drivers/pinctrl/aspeed/pinctrl-aspeed.c

> index 53f3f8aec695..a2f5ede3f897 100644

> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c

> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c

> @@ -292,7 +292,7 @@ static bool aspeed_expr_is_gpio(const struct 

> aspeed_sig_expr *expr)

>  	 *

>  	 * expr->signal might look like "GPIOT3" in the GPIO case.

>  	 */

> -	return strncmp(expr->signal, "GPIO", 4) == 0;

> +	return strncmp(expr->signal, "GPI", 3) == 0;

>  }

>  

>  static bool aspeed_gpio_in_exprs(const struct aspeed_sig_expr **exprs)

> -- 

> 2.17.1

> 

>
Joel Stanley Oct. 30, 2020, 4:46 a.m. UTC | #2
On Fri, 30 Oct 2020 at 04:28, Andrew Jeffery <andrew@aj.id.au> wrote:
>
> Hi Billy,
>
> On Tue, 27 Oct 2020, at 19:14, Billy Tsai wrote:
> > Some gpio pin at aspeed soc is input only and the prefix name of these
> > pin is "GPI" only. This patch fine-tune the condition of GPIO check from
> > "GPIO" to "GPI".
> >
> > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
>
> I'd like it if we were a bit more specific in the commit message, and even
> better if we update the comment in the code. A quick look at the code suggests
> this issue affects GPIO banks D and E in the AST2400 and AST2500, and banks T
> and U in the AST2600.
>
> Functionally I think the patch is fine.

Also add this line:

Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")

Cheers,

Joel

>
> Cheers,
>
> Andrew
>
> > ---
> >  drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > index 53f3f8aec695..a2f5ede3f897 100644
> > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > @@ -292,7 +292,7 @@ static bool aspeed_expr_is_gpio(const struct
> > aspeed_sig_expr *expr)
> >        *
> >        * expr->signal might look like "GPIOT3" in the GPIO case.
> >        */
> > -     return strncmp(expr->signal, "GPIO", 4) == 0;
> > +     return strncmp(expr->signal, "GPI", 3) == 0;
> >  }
> >
> >  static bool aspeed_gpio_in_exprs(const struct aspeed_sig_expr **exprs)
> > --
> > 2.17.1
> >
> >
Andrew Jeffery Oct. 30, 2020, 6:02 a.m. UTC | #3
On Fri, 30 Oct 2020, at 16:24, Billy Tsai wrote:
> Some gpio pin at aspeed soc is input only and the prefix name of these
> pin is "GPI" only.
> This patch fine-tune the condition of GPIO check from "GPIO" to "GPI"
> and it will fix the usage error of banks D and E in the AST2400/AST2500
> and banks T and U in the AST2600.
> 
> Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
> 
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>

Thanks Billy. Generally the Fixes: tag should be part of the trailer block, 
hopefully Linus is happy to remove the newline for us!

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Linus Walleij Nov. 5, 2020, 2:34 p.m. UTC | #4
On Fri, Oct 30, 2020 at 6:55 AM Billy Tsai <billy_tsai@aspeedtech.com> wrote:

> Some gpio pin at aspeed soc is input only and the prefix name of these

> pin is "GPI" only.

> This patch fine-tune the condition of GPIO check from "GPIO" to "GPI"

> and it will fix the usage error of banks D and E in the AST2400/AST2500

> and banks T and U in the AST2600.

>

> Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")

>

> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>


Thanks Billy, patch applied for fixes!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 53f3f8aec695..a2f5ede3f897 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -292,7 +292,7 @@  static bool aspeed_expr_is_gpio(const struct aspeed_sig_expr *expr)
 	 *
 	 * expr->signal might look like "GPIOT3" in the GPIO case.
 	 */
-	return strncmp(expr->signal, "GPIO", 4) == 0;
+	return strncmp(expr->signal, "GPI", 3) == 0;
 }
 
 static bool aspeed_gpio_in_exprs(const struct aspeed_sig_expr **exprs)