Message ID | 20201020165959.7441-1-khsieh@codeaurora.org |
---|---|
State | Superseded |
Headers | show |
Series | drm/msm/dp: skip checking LINK_STATUS_UPDATED bit | expand |
Quoting Kuogee Hsieh (2020-10-20 09:59:59) > No need to check LINK_STATuS_UPDATED bit before LINK_STATUS_UPDATED? > return 6 bytes of link status during link training. Why? > This patch also fix phy compliance test link rate > conversion error. How? > > Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> > --- Any Fixes: tag? > drivers/gpu/drm/msm/dp/dp_ctrl.c | 20 ++++++-------------- > drivers/gpu/drm/msm/dp/dp_link.c | 24 +++++++++++------------- > 2 files changed, 17 insertions(+), 27 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c > index 6bdaec778c4c..76e891c91c6e 100644 > --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c > @@ -1061,23 +1061,15 @@ static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl, > static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl, > u8 *link_status) > { > - int len = 0; > - u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS; > - u32 link_status_read_max_retries = 100; > - > - while (--link_status_read_max_retries) { > - len = drm_dp_dpcd_read_link_status(ctrl->aux, > - link_status); > - if (len != DP_LINK_STATUS_SIZE) { > - DRM_ERROR("DP link status read failed, err: %d\n", len); > - return len; > - } > + int ret = 0, len; > > - if (!(link_status[offset] & DP_LINK_STATUS_UPDATED)) > - return 0; > + len = drm_dp_dpcd_read_link_status(ctrl->aux, link_status); > + if (len != DP_LINK_STATUS_SIZE) { > + DRM_ERROR("DP link status read failed, err: %d\n", len); > + ret = len; Could this be positive if the len is greater than 0 but not DP_LINK_STATUS_SIZE? Maybe the check should be len < 0? We certainly don't want to return some smaller size from this function, right? > } > > - return -ETIMEDOUT; > + return ret; > } > > static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl, > diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c > index c811da515fb3..58d65daae3b3 100644 > --- a/drivers/gpu/drm/msm/dp/dp_link.c > +++ b/drivers/gpu/drm/msm/dp/dp_link.c > @@ -773,7 +773,8 @@ static int dp_link_process_link_training_request(struct dp_link_private *link) > link->request.test_lane_count); > > link->dp_link.link_params.num_lanes = link->request.test_lane_count; > - link->dp_link.link_params.rate = link->request.test_link_rate; > + link->dp_link.link_params.rate = > + drm_dp_bw_code_to_link_rate(link->request.test_link_rate); Why are we storing bw_code in test_link_rate? This looks very confusing. > > return 0; > }
On 2020-10-20 15:15, Stephen Boyd wrote: > Quoting Kuogee Hsieh (2020-10-20 09:59:59) >> No need to check LINK_STATuS_UPDATED bit before > > LINK_STATUS_UPDATED? > >> return 6 bytes of link status during link training. > > Why? > >> This patch also fix phy compliance test link rate >> conversion error. > > How? > >> >> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> >> --- > > Any Fixes: tag? > >> drivers/gpu/drm/msm/dp/dp_ctrl.c | 20 ++++++-------------- >> drivers/gpu/drm/msm/dp/dp_link.c | 24 +++++++++++------------- >> 2 files changed, 17 insertions(+), 27 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> index 6bdaec778c4c..76e891c91c6e 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> @@ -1061,23 +1061,15 @@ static bool dp_ctrl_train_pattern_set(struct >> dp_ctrl_private *ctrl, >> static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl, >> u8 *link_status) >> { >> - int len = 0; >> - u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - >> DP_LANE0_1_STATUS; >> - u32 link_status_read_max_retries = 100; >> - >> - while (--link_status_read_max_retries) { >> - len = drm_dp_dpcd_read_link_status(ctrl->aux, >> - link_status); >> - if (len != DP_LINK_STATUS_SIZE) { >> - DRM_ERROR("DP link status read failed, err: >> %d\n", len); >> - return len; >> - } >> + int ret = 0, len; >> >> - if (!(link_status[offset] & DP_LINK_STATUS_UPDATED)) >> - return 0; >> + len = drm_dp_dpcd_read_link_status(ctrl->aux, link_status); >> + if (len != DP_LINK_STATUS_SIZE) { >> + DRM_ERROR("DP link status read failed, err: %d\n", >> len); >> + ret = len; > > Could this be positive if the len is greater than 0 but not > DP_LINK_STATUS_SIZE? Maybe the check should be len < 0? We certainly > don't want to return some smaller size from this function, right? > no, it should be exactly the byte number requested to read. otherwise, it should be failed and will re read at next run. >> } >> >> - return -ETIMEDOUT; >> + return ret; >> } >> >> static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl, >> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c >> b/drivers/gpu/drm/msm/dp/dp_link.c >> index c811da515fb3..58d65daae3b3 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_link.c >> +++ b/drivers/gpu/drm/msm/dp/dp_link.c >> @@ -773,7 +773,8 @@ static int >> dp_link_process_link_training_request(struct dp_link_private *link) >> link->request.test_lane_count); >> >> link->dp_link.link_params.num_lanes = >> link->request.test_lane_count; >> - link->dp_link.link_params.rate = link->request.test_link_rate; >> + link->dp_link.link_params.rate = >> + >> drm_dp_bw_code_to_link_rate(link->request.test_link_rate); > > Why are we storing bw_code in test_link_rate? This looks very > confusing. Test_link_rate contains link rate from dpcd read. it need to be convert to real rate by timing 2.7Mb before start phy compliance test. > >> >> return 0; >> }
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index 6bdaec778c4c..76e891c91c6e 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1061,23 +1061,15 @@ static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl, static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl, u8 *link_status) { - int len = 0; - u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS; - u32 link_status_read_max_retries = 100; - - while (--link_status_read_max_retries) { - len = drm_dp_dpcd_read_link_status(ctrl->aux, - link_status); - if (len != DP_LINK_STATUS_SIZE) { - DRM_ERROR("DP link status read failed, err: %d\n", len); - return len; - } + int ret = 0, len; - if (!(link_status[offset] & DP_LINK_STATUS_UPDATED)) - return 0; + len = drm_dp_dpcd_read_link_status(ctrl->aux, link_status); + if (len != DP_LINK_STATUS_SIZE) { + DRM_ERROR("DP link status read failed, err: %d\n", len); + ret = len; } - return -ETIMEDOUT; + return ret; } static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl, diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c index c811da515fb3..58d65daae3b3 100644 --- a/drivers/gpu/drm/msm/dp/dp_link.c +++ b/drivers/gpu/drm/msm/dp/dp_link.c @@ -773,7 +773,8 @@ static int dp_link_process_link_training_request(struct dp_link_private *link) link->request.test_lane_count); link->dp_link.link_params.num_lanes = link->request.test_lane_count; - link->dp_link.link_params.rate = link->request.test_link_rate; + link->dp_link.link_params.rate = + drm_dp_bw_code_to_link_rate(link->request.test_link_rate); return 0; } @@ -939,20 +940,17 @@ static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r) */ static int dp_link_process_link_status_update(struct dp_link_private *link) { - if (!(get_link_status(link->link_status, - DP_LANE_ALIGN_STATUS_UPDATED) & - DP_LINK_STATUS_UPDATED) || - (drm_dp_clock_recovery_ok(link->link_status, - link->dp_link.link_params.num_lanes) && - drm_dp_channel_eq_ok(link->link_status, - link->dp_link.link_params.num_lanes))) - return -EINVAL; + bool channel_eq_done = drm_dp_channel_eq_ok(link->link_status, + link->dp_link.link_params.num_lanes); + + bool clock_recovery_done = drm_dp_clock_recovery_ok(link->link_status, + link->dp_link.link_params.num_lanes); DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n", - drm_dp_clock_recovery_ok(link->link_status, - link->dp_link.link_params.num_lanes), - drm_dp_clock_recovery_ok(link->link_status, - link->dp_link.link_params.num_lanes)); + channel_eq_done, clock_recovery_done); + + if (channel_eq_done && clock_recovery_done) + return -EINVAL; return 0; }
No need to check LINK_STATuS_UPDATED bit before return 6 bytes of link status during link training. This patch also fix phy compliance test link rate conversion error. Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 20 ++++++-------------- drivers/gpu/drm/msm/dp/dp_link.c | 24 +++++++++++------------- 2 files changed, 17 insertions(+), 27 deletions(-) base-commit: 0855cb4b31953b8c539e57b970da8146bcd4405a