diff mbox series

[03/30] spi: dw: Initialize n_bytes before the memory barrier

Message ID 20200920112914.26501-4-Sergey.Semin@baikalelectronics.ru
State Accepted
Commit 8225c1c9a073c323f68833d136fcf94fbc75a275
Headers show
Series [01/30] spi: dw: Discard IRQ threshold macro | expand

Commit Message

Serge Semin Sept. 20, 2020, 11:28 a.m. UTC
Since n_bytes field of the DW SPI private data is also utilized by the
IRQ handler, we need to make sure it' initialization is done before the
memory barrier.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 drivers/spi/spi-dw-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mark Brown Sept. 29, 2020, 1:12 p.m. UTC | #1
On Sun, Sep 20, 2020 at 02:28:47PM +0300, Serge Semin wrote:
> Since n_bytes field of the DW SPI private data is also utilized by the
> IRQ handler, we need to make sure it' initialization is done before the
> memory barrier.

This looks like a fix so should have been before any cosmetic cleanups.
Serge Semin Sept. 29, 2020, 10:05 p.m. UTC | #2
On Tue, Sep 29, 2020 at 02:12:25PM +0100, Mark Brown wrote:
> On Sun, Sep 20, 2020 at 02:28:47PM +0300, Serge Semin wrote:

> > Since n_bytes field of the DW SPI private data is also utilized by the

> > IRQ handler, we need to make sure it' initialization is done before the

> > memory barrier.

> 


> This looks like a fix so should have been before any cosmetic cleanups.


Ah, sorry about that. I had that in mind, but have just forgotten to move it
to the series head.

-Sergey
diff mbox series

Patch

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 8b3ce5a0378a..1af74362461d 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -299,6 +299,7 @@  static int dw_spi_transfer_one(struct spi_controller *master,
 
 	dws->dma_mapped = 0;
 	spin_lock_irqsave(&dws->buf_lock, flags);
+	dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
 	dws->tx = (void *)transfer->tx_buf;
 	dws->tx_end = dws->tx + transfer->len;
 	dws->rx = transfer->rx_buf;
@@ -323,7 +324,6 @@  static int dw_spi_transfer_one(struct spi_controller *master,
 	}
 
 	transfer->effective_speed_hz = dws->max_freq / chip->clk_div;
-	dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
 
 	cr0 = dws->update_cr0(master, spi, transfer);
 	dw_writel(dws, DW_SPI_CTRLR0, cr0);