Message ID | 1600817059-26721-18-git-send-email-kwankhede@nvidia.com |
---|---|
State | New |
Headers | show |
Series | Add migration support for VFIO devices | expand |
On 9/22/20 6:24 PM, Kirti Wankhede wrote: > Added amount of bytes transferred to the target VM by all VFIO devices > > Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> > --- > > Note: Comments from v25 for this patch are not addressed yet. > https://www.mail-archive.com/qemu-devel@nongnu.org/msg715620.html > > Alex, need more pointer on documentation part raised Markus Armbruster. > > > +++ b/qapi/migration.json > @@ -147,6 +147,18 @@ > 'active', 'postcopy-active', 'postcopy-paused', > 'postcopy-recover', 'completed', 'failed', 'colo', > 'pre-switchover', 'device', 'wait-unplug' ] } > +## > +# @VfioStats: > +# > +# Detailed VFIO devices migration statistics > +# > +# @transferred: amount of bytes transferred to the target VM by VFIO devices > +# > +# Since: 5.1 This should be Since: 5.2 > +# > +## > +{ 'struct': 'VfioStats', > + 'data': {'transferred': 'int' } } > > ## > # @MigrationInfo: > @@ -208,11 +220,16 @@ > # > # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) > # > +# @vfio: @VfioStats containing detailed VFIO devices migration statistics, > +# only returned if VFIO device is present, migration is supported by all > +# VFIO devices and status is 'active' or 'completed' (since 5.1) and here > +# > # Since: 0.14.0 > ## > { 'struct': 'MigrationInfo', > 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats', > '*disk': 'MigrationStats', > + '*vfio': 'VfioStats', > '*xbzrle-cache': 'XBZRLECacheStats', > '*total-time': 'int', > '*expected-downtime': 'int', > -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
On Wed, 23 Sep 2020 04:54:19 +0530 Kirti Wankhede <kwankhede@nvidia.com> wrote: > Added amount of bytes transferred to the target VM by all VFIO devices > > Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> > --- > > Note: Comments from v25 for this patch are not addressed yet. > https://www.mail-archive.com/qemu-devel@nongnu.org/msg715620.html > > Alex, need more pointer on documentation part raised Markus Armbruster. I'm not sure what you're asking of me here. Are we being asked to justify that a vfio device has state that needs to be migrated and the ability to dirty pages? > > hw/vfio/common.c | 20 ++++++++++++++++++++ > hw/vfio/migration.c | 10 ++++++++++ > include/qemu/vfio-helpers.h | 3 +++ > migration/migration.c | 14 ++++++++++++++ > monitor/hmp-cmds.c | 6 ++++++ > qapi/migration.json | 17 +++++++++++++++++ > 6 files changed, 70 insertions(+) > > diff --git a/hw/vfio/common.c b/hw/vfio/common.c > index 7eeaa368187a..286cdaac8674 100644 > --- a/hw/vfio/common.c > +++ b/hw/vfio/common.c > @@ -39,6 +39,7 @@ > #include "trace.h" > #include "qapi/error.h" > #include "migration/migration.h" > +#include "qemu/vfio-helpers.h" > > VFIOGroupList vfio_group_list = > QLIST_HEAD_INITIALIZER(vfio_group_list); > @@ -292,6 +293,25 @@ const MemoryRegionOps vfio_region_ops = { > * Device state interfaces > */ > > +bool vfio_mig_active(void) > +{ > + VFIOGroup *group; > + VFIODevice *vbasedev; > + > + if (QLIST_EMPTY(&vfio_group_list)) { > + return false; > + } > + > + QLIST_FOREACH(group, &vfio_group_list, next) { > + QLIST_FOREACH(vbasedev, &group->device_list, next) { > + if (vbasedev->migration_blocker) { > + return false; > + } > + } > + } > + return true; > +} > + > static bool vfio_devices_all_stopped_and_saving(VFIOContainer *container) > { > VFIOGroup *group; > diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c > index 822b68b4e015..c4226fa8b183 100644 > --- a/hw/vfio/migration.c > +++ b/hw/vfio/migration.c > @@ -28,6 +28,7 @@ > #include "pci.h" > #include "trace.h" > #include "hw/hw.h" > +#include "qemu/vfio-helpers.h" > > /* > * Flags used as delimiter: > @@ -40,6 +41,8 @@ > #define VFIO_MIG_FLAG_DEV_SETUP_STATE (0xffffffffef100003ULL) > #define VFIO_MIG_FLAG_DEV_DATA_STATE (0xffffffffef100004ULL) > > +static int64_t bytes_transferred; > + > static inline int vfio_mig_access(VFIODevice *vbasedev, void *val, int count, > off_t off, bool iswrite) > { > @@ -289,6 +292,7 @@ static int vfio_save_buffer(QEMUFile *f, VFIODevice *vbasedev, uint64_t *size) > *size = data_size; > } > > + bytes_transferred += data_size; > return ret; > } > > @@ -770,6 +774,7 @@ static void vfio_migration_state_notifier(Notifier *notifier, void *data) > } > > vfio_set_dirty_page_tracking(vbasedev, false); > + bytes_transferred = 0; > } > } > > @@ -820,6 +825,11 @@ static int vfio_migration_init(VFIODevice *vbasedev, > > /* ---------------------------------------------------------------------- */ > > +int64_t vfio_mig_bytes_transferred(void) > +{ > + return bytes_transferred; > +} > + > int vfio_migration_probe(VFIODevice *vbasedev, Error **errp) > { > VFIOContainer *container = vbasedev->group->container; > diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h > index 1f057c2b9e40..26a7df0767b1 100644 > --- a/include/qemu/vfio-helpers.h > +++ b/include/qemu/vfio-helpers.h > @@ -29,4 +29,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar, > int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e, > int irq_type, Error **errp); > > +bool vfio_mig_active(void); > +int64_t vfio_mig_bytes_transferred(void); > + > #endif > diff --git a/migration/migration.c b/migration/migration.c > index 58a5452471f9..b204bb1f6cd9 100644 > --- a/migration/migration.c > +++ b/migration/migration.c > @@ -56,6 +56,7 @@ > #include "net/announce.h" > #include "qemu/queue.h" > #include "multifd.h" > +#include "qemu/vfio-helpers.h" > > #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */ > > @@ -996,6 +997,17 @@ static void populate_disk_info(MigrationInfo *info) > } > } > > +static void populate_vfio_info(MigrationInfo *info) > +{ > +#ifdef CONFIG_LINUX > + if (vfio_mig_active()) { > + info->has_vfio = true; > + info->vfio = g_malloc0(sizeof(*info->vfio)); > + info->vfio->transferred = vfio_mig_bytes_transferred(); > + } > +#endif > +} > + > static void fill_source_migration_info(MigrationInfo *info) > { > MigrationState *s = migrate_get_current(); > @@ -1020,6 +1032,7 @@ static void fill_source_migration_info(MigrationInfo *info) > populate_time_info(info, s); > populate_ram_info(info, s); > populate_disk_info(info); > + populate_vfio_info(info); > break; > case MIGRATION_STATUS_COLO: > info->has_status = true; > @@ -1028,6 +1041,7 @@ static void fill_source_migration_info(MigrationInfo *info) > case MIGRATION_STATUS_COMPLETED: > populate_time_info(info, s); > populate_ram_info(info, s); > + populate_vfio_info(info); > break; > case MIGRATION_STATUS_FAILED: > info->has_status = true; > diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c > index 7711726fd222..40d60d6a6651 100644 > --- a/monitor/hmp-cmds.c > +++ b/monitor/hmp-cmds.c > @@ -355,6 +355,12 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) > } > monitor_printf(mon, "]\n"); > } > + > + if (info->has_vfio) { > + monitor_printf(mon, "vfio device transferred: %" PRIu64 " kbytes\n", > + info->vfio->transferred >> 10); > + } > + > qapi_free_MigrationInfo(info); > } > > diff --git a/qapi/migration.json b/qapi/migration.json > index 675f70bb6734..3535977123d3 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -147,6 +147,18 @@ > 'active', 'postcopy-active', 'postcopy-paused', > 'postcopy-recover', 'completed', 'failed', 'colo', > 'pre-switchover', 'device', 'wait-unplug' ] } > +## > +# @VfioStats: > +# > +# Detailed VFIO devices migration statistics > +# > +# @transferred: amount of bytes transferred to the target VM by VFIO devices > +# > +# Since: 5.1 > +# > +## > +{ 'struct': 'VfioStats', > + 'data': {'transferred': 'int' } } > > ## > # @MigrationInfo: > @@ -208,11 +220,16 @@ > # > # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) > # > +# @vfio: @VfioStats containing detailed VFIO devices migration statistics, > +# only returned if VFIO device is present, migration is supported by all > +# VFIO devices and status is 'active' or 'completed' (since 5.1) This could be clarified a little: ...only returned if all VFIO devices attached to a VM support migration and migration status is 'active' or 'completed' (since 5.2) Is that accurate? Thanks, Alex > +# > # Since: 0.14.0 > ## > { 'struct': 'MigrationInfo', > 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats', > '*disk': 'MigrationStats', > + '*vfio': 'VfioStats', > '*xbzrle-cache': 'XBZRLECacheStats', > '*total-time': 'int', > '*expected-downtime': 'int',
* Kirti Wankhede (kwankhede@nvidia.com) wrote: > Added amount of bytes transferred to the target VM by all VFIO devices > > Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> > --- > > Note: Comments from v25 for this patch are not addressed yet. > https://www.mail-archive.com/qemu-devel@nongnu.org/msg715620.html > > Alex, need more pointer on documentation part raised Markus Armbruster. I think I'm OK with this from the migration side, except for the minor 5.2's below, so Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Markus is right that we do have lots more information that falls out of the migration stats, but I'm not sure what more you have to collect. Dave > > hw/vfio/common.c | 20 ++++++++++++++++++++ > hw/vfio/migration.c | 10 ++++++++++ > include/qemu/vfio-helpers.h | 3 +++ > migration/migration.c | 14 ++++++++++++++ > monitor/hmp-cmds.c | 6 ++++++ > qapi/migration.json | 17 +++++++++++++++++ > 6 files changed, 70 insertions(+) > > diff --git a/hw/vfio/common.c b/hw/vfio/common.c > index 7eeaa368187a..286cdaac8674 100644 > --- a/hw/vfio/common.c > +++ b/hw/vfio/common.c > @@ -39,6 +39,7 @@ > #include "trace.h" > #include "qapi/error.h" > #include "migration/migration.h" > +#include "qemu/vfio-helpers.h" > > VFIOGroupList vfio_group_list = > QLIST_HEAD_INITIALIZER(vfio_group_list); > @@ -292,6 +293,25 @@ const MemoryRegionOps vfio_region_ops = { > * Device state interfaces > */ > > +bool vfio_mig_active(void) > +{ > + VFIOGroup *group; > + VFIODevice *vbasedev; > + > + if (QLIST_EMPTY(&vfio_group_list)) { > + return false; > + } > + > + QLIST_FOREACH(group, &vfio_group_list, next) { > + QLIST_FOREACH(vbasedev, &group->device_list, next) { > + if (vbasedev->migration_blocker) { > + return false; > + } > + } > + } > + return true; > +} > + > static bool vfio_devices_all_stopped_and_saving(VFIOContainer *container) > { > VFIOGroup *group; > diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c > index 822b68b4e015..c4226fa8b183 100644 > --- a/hw/vfio/migration.c > +++ b/hw/vfio/migration.c > @@ -28,6 +28,7 @@ > #include "pci.h" > #include "trace.h" > #include "hw/hw.h" > +#include "qemu/vfio-helpers.h" > > /* > * Flags used as delimiter: > @@ -40,6 +41,8 @@ > #define VFIO_MIG_FLAG_DEV_SETUP_STATE (0xffffffffef100003ULL) > #define VFIO_MIG_FLAG_DEV_DATA_STATE (0xffffffffef100004ULL) > > +static int64_t bytes_transferred; > + > static inline int vfio_mig_access(VFIODevice *vbasedev, void *val, int count, > off_t off, bool iswrite) > { > @@ -289,6 +292,7 @@ static int vfio_save_buffer(QEMUFile *f, VFIODevice *vbasedev, uint64_t *size) > *size = data_size; > } > > + bytes_transferred += data_size; > return ret; > } > > @@ -770,6 +774,7 @@ static void vfio_migration_state_notifier(Notifier *notifier, void *data) > } > > vfio_set_dirty_page_tracking(vbasedev, false); > + bytes_transferred = 0; > } > } > > @@ -820,6 +825,11 @@ static int vfio_migration_init(VFIODevice *vbasedev, > > /* ---------------------------------------------------------------------- */ > > +int64_t vfio_mig_bytes_transferred(void) > +{ > + return bytes_transferred; > +} > + > int vfio_migration_probe(VFIODevice *vbasedev, Error **errp) > { > VFIOContainer *container = vbasedev->group->container; > diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h > index 1f057c2b9e40..26a7df0767b1 100644 > --- a/include/qemu/vfio-helpers.h > +++ b/include/qemu/vfio-helpers.h > @@ -29,4 +29,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar, > int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e, > int irq_type, Error **errp); > > +bool vfio_mig_active(void); > +int64_t vfio_mig_bytes_transferred(void); > + > #endif > diff --git a/migration/migration.c b/migration/migration.c > index 58a5452471f9..b204bb1f6cd9 100644 > --- a/migration/migration.c > +++ b/migration/migration.c > @@ -56,6 +56,7 @@ > #include "net/announce.h" > #include "qemu/queue.h" > #include "multifd.h" > +#include "qemu/vfio-helpers.h" > > #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */ > > @@ -996,6 +997,17 @@ static void populate_disk_info(MigrationInfo *info) > } > } > > +static void populate_vfio_info(MigrationInfo *info) > +{ > +#ifdef CONFIG_LINUX > + if (vfio_mig_active()) { > + info->has_vfio = true; > + info->vfio = g_malloc0(sizeof(*info->vfio)); > + info->vfio->transferred = vfio_mig_bytes_transferred(); > + } > +#endif > +} > + > static void fill_source_migration_info(MigrationInfo *info) > { > MigrationState *s = migrate_get_current(); > @@ -1020,6 +1032,7 @@ static void fill_source_migration_info(MigrationInfo *info) > populate_time_info(info, s); > populate_ram_info(info, s); > populate_disk_info(info); > + populate_vfio_info(info); > break; > case MIGRATION_STATUS_COLO: > info->has_status = true; > @@ -1028,6 +1041,7 @@ static void fill_source_migration_info(MigrationInfo *info) > case MIGRATION_STATUS_COMPLETED: > populate_time_info(info, s); > populate_ram_info(info, s); > + populate_vfio_info(info); > break; > case MIGRATION_STATUS_FAILED: > info->has_status = true; > diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c > index 7711726fd222..40d60d6a6651 100644 > --- a/monitor/hmp-cmds.c > +++ b/monitor/hmp-cmds.c > @@ -355,6 +355,12 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) > } > monitor_printf(mon, "]\n"); > } > + > + if (info->has_vfio) { > + monitor_printf(mon, "vfio device transferred: %" PRIu64 " kbytes\n", > + info->vfio->transferred >> 10); > + } > + > qapi_free_MigrationInfo(info); > } > > diff --git a/qapi/migration.json b/qapi/migration.json > index 675f70bb6734..3535977123d3 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -147,6 +147,18 @@ > 'active', 'postcopy-active', 'postcopy-paused', > 'postcopy-recover', 'completed', 'failed', 'colo', > 'pre-switchover', 'device', 'wait-unplug' ] } > +## > +# @VfioStats: > +# > +# Detailed VFIO devices migration statistics > +# > +# @transferred: amount of bytes transferred to the target VM by VFIO devices > +# > +# Since: 5.1 > +# > +## > +{ 'struct': 'VfioStats', > + 'data': {'transferred': 'int' } } > > ## > # @MigrationInfo: > @@ -208,11 +220,16 @@ > # > # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) > # > +# @vfio: @VfioStats containing detailed VFIO devices migration statistics, > +# only returned if VFIO device is present, migration is supported by all > +# VFIO devices and status is 'active' or 'completed' (since 5.1) > +# > # Since: 0.14.0 > ## > { 'struct': 'MigrationInfo', > 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats', > '*disk': 'MigrationStats', > + '*vfio': 'VfioStats', > '*xbzrle-cache': 'XBZRLECacheStats', > '*total-time': 'int', > '*expected-downtime': 'int', > -- > 2.7.0 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff --git a/hw/vfio/common.c b/hw/vfio/common.c index 7eeaa368187a..286cdaac8674 100644 --- a/hw/vfio/common.c +++ b/hw/vfio/common.c @@ -39,6 +39,7 @@ #include "trace.h" #include "qapi/error.h" #include "migration/migration.h" +#include "qemu/vfio-helpers.h" VFIOGroupList vfio_group_list = QLIST_HEAD_INITIALIZER(vfio_group_list); @@ -292,6 +293,25 @@ const MemoryRegionOps vfio_region_ops = { * Device state interfaces */ +bool vfio_mig_active(void) +{ + VFIOGroup *group; + VFIODevice *vbasedev; + + if (QLIST_EMPTY(&vfio_group_list)) { + return false; + } + + QLIST_FOREACH(group, &vfio_group_list, next) { + QLIST_FOREACH(vbasedev, &group->device_list, next) { + if (vbasedev->migration_blocker) { + return false; + } + } + } + return true; +} + static bool vfio_devices_all_stopped_and_saving(VFIOContainer *container) { VFIOGroup *group; diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c index 822b68b4e015..c4226fa8b183 100644 --- a/hw/vfio/migration.c +++ b/hw/vfio/migration.c @@ -28,6 +28,7 @@ #include "pci.h" #include "trace.h" #include "hw/hw.h" +#include "qemu/vfio-helpers.h" /* * Flags used as delimiter: @@ -40,6 +41,8 @@ #define VFIO_MIG_FLAG_DEV_SETUP_STATE (0xffffffffef100003ULL) #define VFIO_MIG_FLAG_DEV_DATA_STATE (0xffffffffef100004ULL) +static int64_t bytes_transferred; + static inline int vfio_mig_access(VFIODevice *vbasedev, void *val, int count, off_t off, bool iswrite) { @@ -289,6 +292,7 @@ static int vfio_save_buffer(QEMUFile *f, VFIODevice *vbasedev, uint64_t *size) *size = data_size; } + bytes_transferred += data_size; return ret; } @@ -770,6 +774,7 @@ static void vfio_migration_state_notifier(Notifier *notifier, void *data) } vfio_set_dirty_page_tracking(vbasedev, false); + bytes_transferred = 0; } } @@ -820,6 +825,11 @@ static int vfio_migration_init(VFIODevice *vbasedev, /* ---------------------------------------------------------------------- */ +int64_t vfio_mig_bytes_transferred(void) +{ + return bytes_transferred; +} + int vfio_migration_probe(VFIODevice *vbasedev, Error **errp) { VFIOContainer *container = vbasedev->group->container; diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h index 1f057c2b9e40..26a7df0767b1 100644 --- a/include/qemu/vfio-helpers.h +++ b/include/qemu/vfio-helpers.h @@ -29,4 +29,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar, int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e, int irq_type, Error **errp); +bool vfio_mig_active(void); +int64_t vfio_mig_bytes_transferred(void); + #endif diff --git a/migration/migration.c b/migration/migration.c index 58a5452471f9..b204bb1f6cd9 100644 --- a/migration/migration.c +++ b/migration/migration.c @@ -56,6 +56,7 @@ #include "net/announce.h" #include "qemu/queue.h" #include "multifd.h" +#include "qemu/vfio-helpers.h" #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */ @@ -996,6 +997,17 @@ static void populate_disk_info(MigrationInfo *info) } } +static void populate_vfio_info(MigrationInfo *info) +{ +#ifdef CONFIG_LINUX + if (vfio_mig_active()) { + info->has_vfio = true; + info->vfio = g_malloc0(sizeof(*info->vfio)); + info->vfio->transferred = vfio_mig_bytes_transferred(); + } +#endif +} + static void fill_source_migration_info(MigrationInfo *info) { MigrationState *s = migrate_get_current(); @@ -1020,6 +1032,7 @@ static void fill_source_migration_info(MigrationInfo *info) populate_time_info(info, s); populate_ram_info(info, s); populate_disk_info(info); + populate_vfio_info(info); break; case MIGRATION_STATUS_COLO: info->has_status = true; @@ -1028,6 +1041,7 @@ static void fill_source_migration_info(MigrationInfo *info) case MIGRATION_STATUS_COMPLETED: populate_time_info(info, s); populate_ram_info(info, s); + populate_vfio_info(info); break; case MIGRATION_STATUS_FAILED: info->has_status = true; diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index 7711726fd222..40d60d6a6651 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -355,6 +355,12 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) } monitor_printf(mon, "]\n"); } + + if (info->has_vfio) { + monitor_printf(mon, "vfio device transferred: %" PRIu64 " kbytes\n", + info->vfio->transferred >> 10); + } + qapi_free_MigrationInfo(info); } diff --git a/qapi/migration.json b/qapi/migration.json index 675f70bb6734..3535977123d3 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -147,6 +147,18 @@ 'active', 'postcopy-active', 'postcopy-paused', 'postcopy-recover', 'completed', 'failed', 'colo', 'pre-switchover', 'device', 'wait-unplug' ] } +## +# @VfioStats: +# +# Detailed VFIO devices migration statistics +# +# @transferred: amount of bytes transferred to the target VM by VFIO devices +# +# Since: 5.1 +# +## +{ 'struct': 'VfioStats', + 'data': {'transferred': 'int' } } ## # @MigrationInfo: @@ -208,11 +220,16 @@ # # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) # +# @vfio: @VfioStats containing detailed VFIO devices migration statistics, +# only returned if VFIO device is present, migration is supported by all +# VFIO devices and status is 'active' or 'completed' (since 5.1) +# # Since: 0.14.0 ## { 'struct': 'MigrationInfo', 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats', '*disk': 'MigrationStats', + '*vfio': 'VfioStats', '*xbzrle-cache': 'XBZRLECacheStats', '*total-time': 'int', '*expected-downtime': 'int',
Added amount of bytes transferred to the target VM by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> --- Note: Comments from v25 for this patch are not addressed yet. https://www.mail-archive.com/qemu-devel@nongnu.org/msg715620.html Alex, need more pointer on documentation part raised Markus Armbruster. hw/vfio/common.c | 20 ++++++++++++++++++++ hw/vfio/migration.c | 10 ++++++++++ include/qemu/vfio-helpers.h | 3 +++ migration/migration.c | 14 ++++++++++++++ monitor/hmp-cmds.c | 6 ++++++ qapi/migration.json | 17 +++++++++++++++++ 6 files changed, 70 insertions(+)