Message ID | 20201023192258.3126047-1-robh@kernel.org |
---|---|
State | Accepted |
Commit | 6ad8838de4e9ce7ccb19abeec169d224ddb07dde |
Headers | show |
Series | dt-bindings: More whitespace clean-ups in schema files | expand |
On Fri, Oct 23, 2020 at 02:22:58PM -0500, Rob Herring wrote: > Clean-up incorrect indentation, extra spaces, and missing EOF newline in > schema files. Most of the clean-ups are for list indentation which > should always be 2 spaces more than the preceding keyword. > > Found with yamllint (now integrated into the checks). > > Cc: linux-arm-kernel@lists.infradead.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: linux-serial@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
On Fri, 23 Oct 2020 14:22:58 -0500 Rob Herring <robh@kernel.org> wrote: > Clean-up incorrect indentation, extra spaces, and missing EOF newline in > schema files. Most of the clean-ups are for list indentation which > should always be 2 spaces more than the preceding keyword. > > Found with yamllint (now integrated into the checks). > > Cc: linux-arm-kernel@lists.infradead.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: linux-serial@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio > --- > .../display/bridge/toshiba,tc358775.yaml | 18 ++-- > .../display/panel/ilitek,ili9881c.yaml | 5 +- > .../devicetree/bindings/eeprom/at25.yaml | 6 +- > .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +- > .../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +- > .../bindings/iio/adc/adi,ad7291.yaml | 3 +- > .../bindings/iio/adc/adi,ad7768-1.yaml | 3 +- > .../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +- > .../bindings/iio/adc/holt,hi8435.yaml | 2 +- > .../interrupt-controller/ti,pruss-intc.yaml | 12 +-- > .../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +- > .../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +- > .../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++- > .../pci/socionext,uniphier-pcie-ep.yaml | 18 ++-- > .../phy/socionext,uniphier-ahci-phy.yaml | 6 +- > .../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++-- > .../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++--------- > .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- > .../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +- > .../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++--- > .../bindings/power/reset/reboot-mode.yaml | 6 +- > .../power/supply/ingenic,battery.yaml | 8 +- > .../power/supply/summit,smb347-charger.yaml | 16 +-- > .../bindings/riscv/sifive-l2-cache.yaml | 4 +- > .../devicetree/bindings/rng/imx-rng.yaml | 6 +- > .../bindings/serial/fsl-imx-uart.yaml | 34 +++--- > .../bindings/sound/mchp,spdifrx.yaml | 4 +- > .../bindings/sound/mchp,spdiftx.yaml | 4 +- > .../bindings/sound/qcom,lpass-cpu.yaml | 40 +++---- > .../devicetree/bindings/timer/arm,sp804.yaml | 12 +-- > .../devicetree/bindings/usb/cdns,usb3.yaml | 4 +- > .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- > .../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +- > 33 files changed, 210 insertions(+), 206 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > index 31f085d8ab13..526bbd63924b 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# > title: Toshiba TC358775 DSI to LVDS bridge bindings > > maintainers: > - - Vinay Simha BN <simhavcs@gmail.com> > + - Vinay Simha BN <simhavcs@gmail.com> > > description: | > This binding supports DSI to LVDS bridge TC358775 > @@ -29,7 +29,7 @@ properties: > > vdd-supply: > maxItems: 1 > - description: 1.2V LVDS Power Supply > + description: 1.2V LVDS Power Supply > > vddio-supply: > maxItems: 1 > @@ -77,13 +77,13 @@ properties: > - port@1 > > required: > - - compatible > - - reg > - - vdd-supply > - - vddio-supply > - - stby-gpios > - - reset-gpios > - - ports > + - compatible > + - reg > + - vdd-supply > + - vddio-supply > + - stby-gpios > + - reset-gpios > + - ports > > examples: > - | > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > index c60b3bd74337..b2fcec4f22fd 100644 > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > @@ -13,9 +13,8 @@ properties: > compatible: > items: > - enum: > - - bananapi,lhr050h41 > - - feixin,k101-im2byl02 > - > + - bananapi,lhr050h41 > + - feixin,k101-im2byl02 > - const: ilitek,ili9881c > > backlight: true > diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml > index 9810619a2b5c..744973637678 100644 > --- a/Documentation/devicetree/bindings/eeprom/at25.yaml > +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml > @@ -81,14 +81,14 @@ properties: > at25,byte-len: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Total eeprom size in bytes. Deprecated, use "size" property instead. > + Total eeprom size in bytes. Deprecated, use "size" property instead. > deprecated: true > > at25,addr-mode: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Addr-mode flags, as defined in include/linux/spi/eeprom.h. > - Deprecated, use "address-width" property instead. > + Addr-mode flags, as defined in include/linux/spi/eeprom.h. > + Deprecated, use "address-width" property instead. > deprecated: true > > at25,page-size: > diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > index e2d2c10e536a..b032471831e7 100644 > --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > @@ -43,8 +43,8 @@ properties: > gpio-controller: true > > gpio-line-names: > - minItems: 1 > - maxItems: 8 > + minItems: 1 > + maxItems: 8 > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > index 0e7b4b8a7e48..e1e65eb4f795 100644 > --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > @@ -19,11 +19,11 @@ properties: > compatible: > oneOf: > - enum: > - - ingenic,jz4770-i2c > - - ingenic,x1000-i2c > + - ingenic,jz4770-i2c > + - ingenic,x1000-i2c > - items: > - - const: ingenic,jz4780-i2c > - - const: ingenic,jz4770-i2c > + - const: ingenic,jz4780-i2c > + - const: ingenic,jz4770-i2c > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > index 6feafb7e531e..930f9e3904d7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > @@ -43,4 +43,5 @@ examples: > vref-supply = <&adc_vref>; > }; > }; > -... > \ No newline at end of file > +... > + > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > index d3733ad8785a..8f32800fe5b7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > @@ -46,7 +46,8 @@ properties: > spi-max-frequency: true > > spi-cpol: true > - spi-cpha : true > + > + spi-cpha: true > > "#io-channel-cells": > const: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > index 5d92b477e23f..4e695b97d015 100644 > --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > @@ -22,8 +22,8 @@ properties: > adc-reserved-channels: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Bitmask of reserved channels, i.e. channels that cannot be > - used by the OS. > + Bitmask of reserved channels, i.e. channels that cannot be > + used by the OS. > > clocks: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > index 9514c3381c42..52490cbb0af0 100644 > --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > @@ -21,7 +21,7 @@ properties: > > gpios: > description: > - GPIO used for controlling the reset pin > + GPIO used for controlling the reset pin > maxItems: 1 > > spi-max-frequency: true > diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > index bbf79d125675..1c4c009dedd0 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > @@ -94,12 +94,12 @@ properties: > instances. > > required: > - - compatible > - - reg > - - interrupts > - - interrupt-names > - - interrupt-controller > - - "#interrupt-cells" > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - interrupt-controller > + - "#interrupt-cells" > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > index 074243c40891..08af356f5d27 100644 > --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > @@ -17,7 +17,7 @@ properties: > compatible: > items: > - enum: > - - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) > + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) > - const: ene,kb3930 > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > index 58fe9d02a781..0753289fba84 100644 > --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > @@ -32,11 +32,11 @@ allOf: > clock-output-names: > oneOf: > - items: > - - const: clk_out_sd0 > - - const: clk_in_sd0 > + - const: clk_out_sd0 > + - const: clk_in_sd0 > - items: > - - const: clk_out_sd1 > - - const: clk_in_sd1 > + - const: clk_out_sd1 > + - const: clk_in_sd1 > > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > index ac79f3adf20b..2cd859066462 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > @@ -3,7 +3,7 @@ > %YAML 1.2 > --- > $id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" > -$schema : "http://devicetree.org/meta-schemas/core.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > title: TI AM654 MMC Controller > > @@ -163,13 +163,12 @@ properties: > ti,driver-strength-ohm: > description: DLL drive strength in ohms > $ref: "/schemas/types.yaml#/definitions/uint32" > - oneOf: > - - enum: > - - 33 > - - 40 > - - 50 > - - 66 > - - 100 > + enum: > + - 33 > + - 40 > + - 50 > + - 66 > + - 100 > > ti,strobe-sel: > description: strobe select delay for HS400 speed mode. > diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > index f4292d2c54e3..d6cf8a560ef0 100644 > --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > @@ -29,16 +29,16 @@ properties: > reg-names: > oneOf: > - items: > - - const: dbi > - - const: dbi2 > - - const: link > - - const: addr_space > + - const: dbi > + - const: dbi2 > + - const: link > + - const: addr_space > - items: > - - const: dbi > - - const: dbi2 > - - const: link > - - const: addr_space > - - const: atu > + - const: dbi > + - const: dbi2 > + - const: link > + - const: addr_space > + - const: atu > > clocks: > maxItems: 2 > diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > index bab2ff4d9dc9..34756347a14e 100644 > --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > @@ -31,10 +31,10 @@ properties: > clock-names: > oneOf: > - items: # for PXs2 > - - const: link > + - const: link > - items: # for others > - - const: link > - - const: phy > + - const: link > + - const: phy > > resets: > maxItems: 2 > diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > index 15207ca9548f..ab77a65c5c55 100644 > --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# > title: OMAP USB2 PHY > > maintainers: > - - Kishon Vijay Abraham I <kishon@ti.com> > - - Roger Quadros <rogerq@ti.com> > + - Kishon Vijay Abraham I <kishon@ti.com> > + - Roger Quadros <rogerq@ti.com> > > properties: > compatible: > oneOf: > - items: > - - enum: > - - ti,dra7x-usb2 > - - ti,dra7x-usb2-phy2 > - - ti,am654-usb2 > - - enum: > - - ti,omap-usb2 > + - enum: > + - ti,dra7x-usb2 > + - ti,dra7x-usb2-phy2 > + - ti,am654-usb2 > + - enum: > + - ti,omap-usb2 > - items: > - - const: ti,am437x-usb2 > + - const: ti,am437x-usb2 > - items: > - - const: ti,omap-usb2 > + - const: ti,omap-usb2 > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > index 33391d30c00c..ccdd9e3820d7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > @@ -76,22 +76,22 @@ patternProperties: > items: > oneOf: > - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp, > - rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, > - rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, > - i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, > - ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, > - ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, > - dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, > - dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, > - spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, > - dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, > - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, > - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, > - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, > - uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, > - pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, > - dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, > - nand_ceb3_mfp] > + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, > + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, > + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, > + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, > + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, > + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, > + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, > + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, > + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, > + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, > + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, > + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, > + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, > + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, > + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, > + nand_ceb3_mfp] > minItems: 1 > maxItems: 32 > > @@ -100,10 +100,10 @@ patternProperties: > Specify the alternative function to be configured for the > given gpio pin groups. > enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, > - sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, > - i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, > - p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, > - mipi_csi, nand, spdif, ts, lcd0] > + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, > + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, > + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, > + mipi_csi, nand, spdif, ts, lcd0] > > required: > - groups > @@ -126,14 +126,14 @@ patternProperties: > items: > oneOf: > - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv, > - rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, > - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, > - i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, > - lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, > - sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, > - spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, > - i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, > - sens0_ckout_drv, uart3_all_drv] > + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, > + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, > + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, > + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, > + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, > + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, > + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, > + sens0_ckout_drv, uart3_all_drv] > minItems: 1 > maxItems: 32 > > @@ -144,29 +144,29 @@ patternProperties: > items: > oneOf: > - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen, > - eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, > - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, > - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, > - i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, > - ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, > - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, > - lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, > - lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, > - dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, > - dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, > - sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, > - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, > - uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, > - sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, > - dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, > - uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, > - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, > - i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, > - csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, > - csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, > - dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, > - dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, > - pkg2, pkg3] > + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, > + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, > + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, > + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, > + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, > + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, > + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, > + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, > + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, > + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, > + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, > + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, > + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, > + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, > + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, > + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, > + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, > + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, > + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, > + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, > + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, > + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, > + pkg2, pkg3] > minItems: 1 > maxItems: 64 > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > index 5556def6b99b..c4c071211611 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > @@ -106,7 +106,7 @@ patternProperties: > required: > - pinmux > > - additionalProperties: false > + additionalProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > index 1f0f5757f9e1..040d2ada3669 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > @@ -71,9 +71,9 @@ patternProperties: > Specify the alternative function to be configured for the specified > pins. Functions are only valid for gpio pins. > enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, > - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, > - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, > - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] > + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, > + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, > + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] > > drive-strength: > enum: [2, 4, 6, 8, 10, 12, 14, 16] > diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > index d0d1a01140ea..9f1dab0c2430 100644 > --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > @@ -40,24 +40,24 @@ patternProperties: > Function to mux. > $ref: "/schemas/types.yaml#/definitions/string" > enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, > - spi0, spi1, spi2, spi3, spi4, spi5, spi6, > - uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] > + spi0, spi1, spi2, spi3, spi4, spi5, spi6, > + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] > > groups: > description: > Name of the pin group to use for the functions. > $ref: "/schemas/types.yaml#/definitions/string" > enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, > - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, > - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, > - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, > - uart0_grp, uart1_grp, uart2_grp, uart3_grp, > - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, > - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, > - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, > - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, > - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, > - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] > + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, > + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, > + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, > + uart0_grp, uart1_grp, uart2_grp, uart3_grp, > + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, > + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, > + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, > + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, > + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, > + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] > > drive-strength: > enum: [2, 4, 6, 8, 16, 24, 32] > diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > index a6c91026d4cc..a2dca38577f7 100644 > --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > @@ -28,9 +28,9 @@ description: | > > properties: > mode-normal: > - $ref: /schemas/types.yaml#/definitions/uint32 > - description: | > - Default value to set on a reboot if no command was provided. > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Default value to set on a reboot if no command was provided. > > patternProperties: > "^mode-.*$": > diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > index 867e3e6b7e80..76c227a7cd5c 100644 > --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > @@ -15,10 +15,10 @@ properties: > oneOf: > - const: ingenic,jz4740-battery > - items: > - - enum: > - - ingenic,jz4725b-battery > - - ingenic,jz4770-battery > - - const: ingenic,jz4740-battery > + - enum: > + - ingenic,jz4725b-battery > + - ingenic,jz4770-battery > + - const: ingenic,jz4740-battery > > io-channels: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > index 193a23af2007..983fc215c1e5 100644 > --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > @@ -84,12 +84,12 @@ allOf: > then: > properties: > summit,mains-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 1000000, > - 1500000, 1800000, 2000000] > + enum: [ 300000, 500000, 700000, 1000000, > + 1500000, 1800000, 2000000] > > summit,usb-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 1000000, > - 1500000, 1800000, 2000000] > + enum: [ 300000, 500000, 700000, 1000000, > + 1500000, 1800000, 2000000] > > summit,charge-current-compensation-microamp: > enum: [200000, 450000, 600000, 900000] > @@ -97,12 +97,12 @@ allOf: > else: > properties: > summit,mains-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 900000, 1200000, > - 1500000, 1800000, 2000000, 2200000, 2500000] > + enum: [ 300000, 500000, 700000, 900000, 1200000, > + 1500000, 1800000, 2000000, 2200000, 2500000] > > summit,usb-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 900000, 1200000, > - 1500000, 1800000, 2000000, 2200000, 2500000] > + enum: [ 300000, 500000, 700000, 900000, 1200000, > + 1500000, 1800000, 2000000, 2200000, 2500000] > > summit,charge-current-compensation-microamp: > enum: [250000, 700000, 900000, 1200000] > diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > index 3f4a1939554d..efc0198eeb74 100644 > --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > @@ -25,8 +25,8 @@ select: > properties: > compatible: > items: > - - enum: > - - sifive,fu540-c000-ccache > + - enum: > + - sifive,fu540-c000-ccache > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml > index 4ad1e456a801..07f6ff89bcc1 100644 > --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml > +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml > @@ -19,9 +19,9 @@ properties: > - const: fsl,imx21-rnga > - items: > - enum: > - - fsl,imx6sl-rngb > - - fsl,imx6sll-rngb > - - fsl,imx6ull-rngb > + - fsl,imx6sl-rngb > + - fsl,imx6sll-rngb > + - fsl,imx6ull-rngb > - const: fsl,imx25-rngb > - const: fsl,imx35-rngc > > diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > index 9ff85bc6859c..9702c07a6b6c 100644 > --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > @@ -20,30 +20,30 @@ properties: > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx25-uart > - - fsl,imx27-uart > - - fsl,imx31-uart > - - fsl,imx35-uart > - - fsl,imx50-uart > - - fsl,imx51-uart > - - fsl,imx53-uart > - - fsl,imx6q-uart > + - fsl,imx25-uart > + - fsl,imx27-uart > + - fsl,imx31-uart > + - fsl,imx35-uart > + - fsl,imx50-uart > + - fsl,imx51-uart > + - fsl,imx53-uart > + - fsl,imx6q-uart > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx6sl-uart > - - fsl,imx6sll-uart > - - fsl,imx6sx-uart > + - fsl,imx6sl-uart > + - fsl,imx6sll-uart > + - fsl,imx6sx-uart > - const: fsl,imx6q-uart > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx6ul-uart > - - fsl,imx7d-uart > - - fsl,imx8mm-uart > - - fsl,imx8mn-uart > - - fsl,imx8mp-uart > - - fsl,imx8mq-uart > + - fsl,imx6ul-uart > + - fsl,imx7d-uart > + - fsl,imx8mm-uart > + - fsl,imx8mn-uart > + - fsl,imx8mp-uart > + - fsl,imx8mq-uart > - const: fsl,imx6q-uart > > reg: > diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > index 7d8bd4e14434..4a2129005c0f 100644 > --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > @@ -10,8 +10,8 @@ maintainers: > - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > > description: > - The Microchip Sony/Philips Digital Interface Receiver is a > - serial port compliant with the IEC-60958 standard. > + The Microchip Sony/Philips Digital Interface Receiver is a serial port > + compliant with the IEC-60958 standard. > > properties: > "#sound-dai-cells": > diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > index a03b0b871fc9..bdfb63387c53 100644 > --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > @@ -10,8 +10,8 @@ maintainers: > - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > > description: > - The Microchip Sony/Philips Digital Interface Transmitter is a > - serial port compliant with the IEC-60958 standard. > + The Microchip Sony/Philips Digital Interface Transmitter is a serial port > + compliant with the IEC-60958 standard. > > properties: > "#sound-dai-cells": > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > index f6f9fb49f385..1e23c0e20bc1 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > @@ -26,8 +26,10 @@ properties: > reg: > maxItems: 2 > description: LPAIF core registers > + > reg-names: > - maxItems: 2 > + maxItems: 2 > + > clocks: > minItems: 3 > maxItems: 6 > @@ -39,8 +41,10 @@ properties: > interrupts: > maxItems: 2 > description: LPAIF DMA buffer interrupt > + > interrupt-names: > maxItems: 2 > + > qcom,adsp: > $ref: /schemas/types.yaml#/definitions/phandle > description: Phandle for the audio DSP node > @@ -141,31 +145,31 @@ allOf: > properties: > clock-names: > oneOf: > - - items: #for I2S > - - const: pcnoc-sway-clk > - - const: audio-core > - - const: mclk0 > - - const: pcnoc-mport-clk > - - const: mi2s-bit-clk0 > - - const: mi2s-bit-clk1 > - - items: #for HDMI > - - const: pcnoc-sway-clk > - - const: audio-core > - - const: pcnoc-mport-clk > + - items: #for I2S > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: mclk0 > + - const: pcnoc-mport-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + - items: #for HDMI > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: pcnoc-mport-clk > reg-names: > anyOf: > - items: #for I2S > - - const: lpass-lpaif > + - const: lpass-lpaif > - items: #for I2S and HDMI > - - const: lpass-hdmiif > - - const: lpass-lpaif > + - const: lpass-hdmiif > + - const: lpass-lpaif > interrupt-names: > anyOf: > - items: #for I2S > - - const: lpass-irq-lpaif > + - const: lpass-irq-lpaif > - items: #for I2S and HDMI > - - const: lpass-irq-lpaif > - - const: lpass-irq-hdmi > + - const: lpass-irq-lpaif > + - const: lpass-irq-hdmi > required: > - iommus > - power-domains > diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml > index e35d3053250a..960e2bd66a97 100644 > --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml > +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml > @@ -33,8 +33,8 @@ properties: > compatible: > items: > - enum: > - - arm,sp804 > - - hisilicon,sp804 > + - arm,sp804 > + - hisilicon,sp804 > - const: arm,primecell > > interrupts: > @@ -58,11 +58,11 @@ properties: > clock is used for all clock inputs. > oneOf: > - items: > - - description: clock for timer 1 > - - description: clock for timer 2 > - - description: bus clock > + - description: clock for timer 1 > + - description: clock for timer 2 > + - description: bus clock > - items: > - - description: unified clock for both timers and the bus > + - description: unified clock for both timers and the bus > > clock-names: true > # The original binding did not specify any clock names, and there is no > diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > index ac20b98e9910..d6af2794d444 100644 > --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > @@ -44,8 +44,8 @@ properties: > enum: [super-speed, high-speed, full-speed] > > phys: > - minItems: 1 > - maxItems: 2 > + minItems: 1 > + maxItems: 2 > > phy-names: > minItems: 1 > diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > index 5fe9e6211ba2..52ceb07294a3 100644 > --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > @@ -17,7 +17,7 @@ description: |- > > properties: > compatible: > - const: ti,hd3ss3220 > + const: ti,hd3ss3220 > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > index 1aaf3e768c81..55adea827c34 100644 > --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > @@ -15,10 +15,10 @@ properties: > - const: fsl,imx21-owire > - items: > - enum: > - - fsl,imx27-owire > - - fsl,imx50-owire > - - fsl,imx51-owire > - - fsl,imx53-owire > + - fsl,imx27-owire > + - fsl,imx50-owire > + - fsl,imx51-owire > + - fsl,imx53-owire > - const: fsl,imx21-owire > > reg:
On Fri, 23 Oct 2020 at 21:23, Rob Herring <robh@kernel.org> wrote: > > Clean-up incorrect indentation, extra spaces, and missing EOF newline in > schema files. Most of the clean-ups are for list indentation which > should always be 2 spaces more than the preceding keyword. > > Found with yamllint (now integrated into the checks). > > Cc: linux-arm-kernel@lists.infradead.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: linux-serial@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> > --- > .../display/bridge/toshiba,tc358775.yaml | 18 ++-- > .../display/panel/ilitek,ili9881c.yaml | 5 +- > .../devicetree/bindings/eeprom/at25.yaml | 6 +- > .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +- > .../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +- > .../bindings/iio/adc/adi,ad7291.yaml | 3 +- > .../bindings/iio/adc/adi,ad7768-1.yaml | 3 +- > .../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +- > .../bindings/iio/adc/holt,hi8435.yaml | 2 +- > .../interrupt-controller/ti,pruss-intc.yaml | 12 +-- > .../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +- > .../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +- > .../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++- > .../pci/socionext,uniphier-pcie-ep.yaml | 18 ++-- > .../phy/socionext,uniphier-ahci-phy.yaml | 6 +- > .../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++-- > .../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++--------- > .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- > .../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +- > .../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++--- > .../bindings/power/reset/reboot-mode.yaml | 6 +- > .../power/supply/ingenic,battery.yaml | 8 +- > .../power/supply/summit,smb347-charger.yaml | 16 +-- > .../bindings/riscv/sifive-l2-cache.yaml | 4 +- > .../devicetree/bindings/rng/imx-rng.yaml | 6 +- > .../bindings/serial/fsl-imx-uart.yaml | 34 +++--- > .../bindings/sound/mchp,spdifrx.yaml | 4 +- > .../bindings/sound/mchp,spdiftx.yaml | 4 +- > .../bindings/sound/qcom,lpass-cpu.yaml | 40 +++---- > .../devicetree/bindings/timer/arm,sp804.yaml | 12 +-- > .../devicetree/bindings/usb/cdns,usb3.yaml | 4 +- > .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- > .../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +- > 33 files changed, 210 insertions(+), 206 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > index 31f085d8ab13..526bbd63924b 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# > title: Toshiba TC358775 DSI to LVDS bridge bindings > > maintainers: > - - Vinay Simha BN <simhavcs@gmail.com> > + - Vinay Simha BN <simhavcs@gmail.com> > > description: | > This binding supports DSI to LVDS bridge TC358775 > @@ -29,7 +29,7 @@ properties: > > vdd-supply: > maxItems: 1 > - description: 1.2V LVDS Power Supply > + description: 1.2V LVDS Power Supply > > vddio-supply: > maxItems: 1 > @@ -77,13 +77,13 @@ properties: > - port@1 > > required: > - - compatible > - - reg > - - vdd-supply > - - vddio-supply > - - stby-gpios > - - reset-gpios > - - ports > + - compatible > + - reg > + - vdd-supply > + - vddio-supply > + - stby-gpios > + - reset-gpios > + - ports > > examples: > - | > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > index c60b3bd74337..b2fcec4f22fd 100644 > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml > @@ -13,9 +13,8 @@ properties: > compatible: > items: > - enum: > - - bananapi,lhr050h41 > - - feixin,k101-im2byl02 > - > + - bananapi,lhr050h41 > + - feixin,k101-im2byl02 > - const: ilitek,ili9881c > > backlight: true > diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml > index 9810619a2b5c..744973637678 100644 > --- a/Documentation/devicetree/bindings/eeprom/at25.yaml > +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml > @@ -81,14 +81,14 @@ properties: > at25,byte-len: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Total eeprom size in bytes. Deprecated, use "size" property instead. > + Total eeprom size in bytes. Deprecated, use "size" property instead. > deprecated: true > > at25,addr-mode: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Addr-mode flags, as defined in include/linux/spi/eeprom.h. > - Deprecated, use "address-width" property instead. > + Addr-mode flags, as defined in include/linux/spi/eeprom.h. > + Deprecated, use "address-width" property instead. > deprecated: true > > at25,page-size: > diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > index e2d2c10e536a..b032471831e7 100644 > --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > @@ -43,8 +43,8 @@ properties: > gpio-controller: true > > gpio-line-names: > - minItems: 1 > - maxItems: 8 > + minItems: 1 > + maxItems: 8 > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > index 0e7b4b8a7e48..e1e65eb4f795 100644 > --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml > @@ -19,11 +19,11 @@ properties: > compatible: > oneOf: > - enum: > - - ingenic,jz4770-i2c > - - ingenic,x1000-i2c > + - ingenic,jz4770-i2c > + - ingenic,x1000-i2c > - items: > - - const: ingenic,jz4780-i2c > - - const: ingenic,jz4770-i2c > + - const: ingenic,jz4780-i2c > + - const: ingenic,jz4770-i2c > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > index 6feafb7e531e..930f9e3904d7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml > @@ -43,4 +43,5 @@ examples: > vref-supply = <&adc_vref>; > }; > }; > -... > \ No newline at end of file > +... > + > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > index d3733ad8785a..8f32800fe5b7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml > @@ -46,7 +46,8 @@ properties: > spi-max-frequency: true > > spi-cpol: true > - spi-cpha : true > + > + spi-cpha: true > > "#io-channel-cells": > const: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > index 5d92b477e23f..4e695b97d015 100644 > --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml > @@ -22,8 +22,8 @@ properties: > adc-reserved-channels: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > - Bitmask of reserved channels, i.e. channels that cannot be > - used by the OS. > + Bitmask of reserved channels, i.e. channels that cannot be > + used by the OS. > > clocks: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > index 9514c3381c42..52490cbb0af0 100644 > --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > @@ -21,7 +21,7 @@ properties: > > gpios: > description: > - GPIO used for controlling the reset pin > + GPIO used for controlling the reset pin > maxItems: 1 > > spi-max-frequency: true > diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > index bbf79d125675..1c4c009dedd0 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > @@ -94,12 +94,12 @@ properties: > instances. > > required: > - - compatible > - - reg > - - interrupts > - - interrupt-names > - - interrupt-controller > - - "#interrupt-cells" > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - interrupt-controller > + - "#interrupt-cells" > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > index 074243c40891..08af356f5d27 100644 > --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml > @@ -17,7 +17,7 @@ properties: > compatible: > items: > - enum: > - - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) > + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) > - const: ene,kb3930 > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > index 58fe9d02a781..0753289fba84 100644 > --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml > @@ -32,11 +32,11 @@ allOf: > clock-output-names: > oneOf: > - items: > - - const: clk_out_sd0 > - - const: clk_in_sd0 > + - const: clk_out_sd0 > + - const: clk_in_sd0 > - items: > - - const: clk_out_sd1 > - - const: clk_in_sd1 > + - const: clk_out_sd1 > + - const: clk_in_sd1 > > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > index ac79f3adf20b..2cd859066462 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml > @@ -3,7 +3,7 @@ > %YAML 1.2 > --- > $id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" > -$schema : "http://devicetree.org/meta-schemas/core.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > title: TI AM654 MMC Controller > > @@ -163,13 +163,12 @@ properties: > ti,driver-strength-ohm: > description: DLL drive strength in ohms > $ref: "/schemas/types.yaml#/definitions/uint32" > - oneOf: > - - enum: > - - 33 > - - 40 > - - 50 > - - 66 > - - 100 > + enum: > + - 33 > + - 40 > + - 50 > + - 66 > + - 100 > > ti,strobe-sel: > description: strobe select delay for HS400 speed mode. > diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > index f4292d2c54e3..d6cf8a560ef0 100644 > --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml > @@ -29,16 +29,16 @@ properties: > reg-names: > oneOf: > - items: > - - const: dbi > - - const: dbi2 > - - const: link > - - const: addr_space > + - const: dbi > + - const: dbi2 > + - const: link > + - const: addr_space > - items: > - - const: dbi > - - const: dbi2 > - - const: link > - - const: addr_space > - - const: atu > + - const: dbi > + - const: dbi2 > + - const: link > + - const: addr_space > + - const: atu > > clocks: > maxItems: 2 > diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > index bab2ff4d9dc9..34756347a14e 100644 > --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml > @@ -31,10 +31,10 @@ properties: > clock-names: > oneOf: > - items: # for PXs2 > - - const: link > + - const: link > - items: # for others > - - const: link > - - const: phy > + - const: link > + - const: phy > > resets: > maxItems: 2 > diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > index 15207ca9548f..ab77a65c5c55 100644 > --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml > @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# > title: OMAP USB2 PHY > > maintainers: > - - Kishon Vijay Abraham I <kishon@ti.com> > - - Roger Quadros <rogerq@ti.com> > + - Kishon Vijay Abraham I <kishon@ti.com> > + - Roger Quadros <rogerq@ti.com> > > properties: > compatible: > oneOf: > - items: > - - enum: > - - ti,dra7x-usb2 > - - ti,dra7x-usb2-phy2 > - - ti,am654-usb2 > - - enum: > - - ti,omap-usb2 > + - enum: > + - ti,dra7x-usb2 > + - ti,dra7x-usb2-phy2 > + - ti,am654-usb2 > + - enum: > + - ti,omap-usb2 > - items: > - - const: ti,am437x-usb2 > + - const: ti,am437x-usb2 > - items: > - - const: ti,omap-usb2 > + - const: ti,omap-usb2 > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > index 33391d30c00c..ccdd9e3820d7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > @@ -76,22 +76,22 @@ patternProperties: > items: > oneOf: > - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp, > - rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, > - rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, > - i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, > - ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, > - ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, > - dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, > - dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, > - spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, > - dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, > - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, > - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, > - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, > - uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, > - pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, > - dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, > - nand_ceb3_mfp] > + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, > + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, > + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, > + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, > + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, > + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, > + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, > + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, > + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, > + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, > + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, > + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, > + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, > + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, > + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, > + nand_ceb3_mfp] > minItems: 1 > maxItems: 32 > > @@ -100,10 +100,10 @@ patternProperties: > Specify the alternative function to be configured for the > given gpio pin groups. > enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, > - sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, > - i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, > - p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, > - mipi_csi, nand, spdif, ts, lcd0] > + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, > + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, > + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, > + mipi_csi, nand, spdif, ts, lcd0] > > required: > - groups > @@ -126,14 +126,14 @@ patternProperties: > items: > oneOf: > - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv, > - rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, > - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, > - i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, > - lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, > - sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, > - spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, > - i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, > - sens0_ckout_drv, uart3_all_drv] > + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, > + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, > + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, > + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, > + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, > + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, > + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, > + sens0_ckout_drv, uart3_all_drv] > minItems: 1 > maxItems: 32 > > @@ -144,29 +144,29 @@ patternProperties: > items: > oneOf: > - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen, > - eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, > - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, > - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, > - i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, > - ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, > - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, > - lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, > - lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, > - dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, > - dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, > - sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, > - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, > - uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, > - sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, > - dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, > - uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, > - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, > - i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, > - csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, > - csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, > - dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, > - dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, > - pkg2, pkg3] > + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, > + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, > + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, > + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, > + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, > + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, > + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, > + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, > + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, > + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, > + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, > + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, > + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, > + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, > + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, > + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, > + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, > + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, > + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, > + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, > + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, > + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, > + pkg2, pkg3] > minItems: 1 > maxItems: 64 > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > index 5556def6b99b..c4c071211611 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > @@ -106,7 +106,7 @@ patternProperties: > required: > - pinmux > > - additionalProperties: false > + additionalProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > index 1f0f5757f9e1..040d2ada3669 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml > @@ -71,9 +71,9 @@ patternProperties: > Specify the alternative function to be configured for the specified > pins. Functions are only valid for gpio pins. > enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, > - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, > - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, > - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] > + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, > + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, > + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] > > drive-strength: > enum: [2, 4, 6, 8, 10, 12, 14, 16] > diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > index d0d1a01140ea..9f1dab0c2430 100644 > --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > @@ -40,24 +40,24 @@ patternProperties: > Function to mux. > $ref: "/schemas/types.yaml#/definitions/string" > enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, > - spi0, spi1, spi2, spi3, spi4, spi5, spi6, > - uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] > + spi0, spi1, spi2, spi3, spi4, spi5, spi6, > + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] > > groups: > description: > Name of the pin group to use for the functions. > $ref: "/schemas/types.yaml#/definitions/string" > enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, > - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, > - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, > - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, > - uart0_grp, uart1_grp, uart2_grp, uart3_grp, > - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, > - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, > - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, > - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, > - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, > - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] > + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, > + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, > + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, > + uart0_grp, uart1_grp, uart2_grp, uart3_grp, > + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, > + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, > + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, > + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, > + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, > + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] > > drive-strength: > enum: [2, 4, 6, 8, 16, 24, 32] > diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > index a6c91026d4cc..a2dca38577f7 100644 > --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml > @@ -28,9 +28,9 @@ description: | > > properties: > mode-normal: > - $ref: /schemas/types.yaml#/definitions/uint32 > - description: | > - Default value to set on a reboot if no command was provided. > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Default value to set on a reboot if no command was provided. > > patternProperties: > "^mode-.*$": > diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > index 867e3e6b7e80..76c227a7cd5c 100644 > --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml > @@ -15,10 +15,10 @@ properties: > oneOf: > - const: ingenic,jz4740-battery > - items: > - - enum: > - - ingenic,jz4725b-battery > - - ingenic,jz4770-battery > - - const: ingenic,jz4740-battery > + - enum: > + - ingenic,jz4725b-battery > + - ingenic,jz4770-battery > + - const: ingenic,jz4740-battery > > io-channels: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > index 193a23af2007..983fc215c1e5 100644 > --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml > @@ -84,12 +84,12 @@ allOf: > then: > properties: > summit,mains-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 1000000, > - 1500000, 1800000, 2000000] > + enum: [ 300000, 500000, 700000, 1000000, > + 1500000, 1800000, 2000000] > > summit,usb-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 1000000, > - 1500000, 1800000, 2000000] > + enum: [ 300000, 500000, 700000, 1000000, > + 1500000, 1800000, 2000000] > > summit,charge-current-compensation-microamp: > enum: [200000, 450000, 600000, 900000] > @@ -97,12 +97,12 @@ allOf: > else: > properties: > summit,mains-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 900000, 1200000, > - 1500000, 1800000, 2000000, 2200000, 2500000] > + enum: [ 300000, 500000, 700000, 900000, 1200000, > + 1500000, 1800000, 2000000, 2200000, 2500000] > > summit,usb-current-limit-microamp: > - enum: [ 300000, 500000, 700000, 900000, 1200000, > - 1500000, 1800000, 2000000, 2200000, 2500000] > + enum: [ 300000, 500000, 700000, 900000, 1200000, > + 1500000, 1800000, 2000000, 2200000, 2500000] > > summit,charge-current-compensation-microamp: > enum: [250000, 700000, 900000, 1200000] > diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > index 3f4a1939554d..efc0198eeb74 100644 > --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml > @@ -25,8 +25,8 @@ select: > properties: > compatible: > items: > - - enum: > - - sifive,fu540-c000-ccache > + - enum: > + - sifive,fu540-c000-ccache > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml > index 4ad1e456a801..07f6ff89bcc1 100644 > --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml > +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml > @@ -19,9 +19,9 @@ properties: > - const: fsl,imx21-rnga > - items: > - enum: > - - fsl,imx6sl-rngb > - - fsl,imx6sll-rngb > - - fsl,imx6ull-rngb > + - fsl,imx6sl-rngb > + - fsl,imx6sll-rngb > + - fsl,imx6ull-rngb > - const: fsl,imx25-rngb > - const: fsl,imx35-rngc > > diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > index 9ff85bc6859c..9702c07a6b6c 100644 > --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml > @@ -20,30 +20,30 @@ properties: > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx25-uart > - - fsl,imx27-uart > - - fsl,imx31-uart > - - fsl,imx35-uart > - - fsl,imx50-uart > - - fsl,imx51-uart > - - fsl,imx53-uart > - - fsl,imx6q-uart > + - fsl,imx25-uart > + - fsl,imx27-uart > + - fsl,imx31-uart > + - fsl,imx35-uart > + - fsl,imx50-uart > + - fsl,imx51-uart > + - fsl,imx53-uart > + - fsl,imx6q-uart > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx6sl-uart > - - fsl,imx6sll-uart > - - fsl,imx6sx-uart > + - fsl,imx6sl-uart > + - fsl,imx6sll-uart > + - fsl,imx6sx-uart > - const: fsl,imx6q-uart > - const: fsl,imx21-uart > - items: > - enum: > - - fsl,imx6ul-uart > - - fsl,imx7d-uart > - - fsl,imx8mm-uart > - - fsl,imx8mn-uart > - - fsl,imx8mp-uart > - - fsl,imx8mq-uart > + - fsl,imx6ul-uart > + - fsl,imx7d-uart > + - fsl,imx8mm-uart > + - fsl,imx8mn-uart > + - fsl,imx8mp-uart > + - fsl,imx8mq-uart > - const: fsl,imx6q-uart > > reg: > diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > index 7d8bd4e14434..4a2129005c0f 100644 > --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml > @@ -10,8 +10,8 @@ maintainers: > - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > > description: > - The Microchip Sony/Philips Digital Interface Receiver is a > - serial port compliant with the IEC-60958 standard. > + The Microchip Sony/Philips Digital Interface Receiver is a serial port > + compliant with the IEC-60958 standard. > > properties: > "#sound-dai-cells": > diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > index a03b0b871fc9..bdfb63387c53 100644 > --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml > @@ -10,8 +10,8 @@ maintainers: > - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > > description: > - The Microchip Sony/Philips Digital Interface Transmitter is a > - serial port compliant with the IEC-60958 standard. > + The Microchip Sony/Philips Digital Interface Transmitter is a serial port > + compliant with the IEC-60958 standard. > > properties: > "#sound-dai-cells": > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > index f6f9fb49f385..1e23c0e20bc1 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > @@ -26,8 +26,10 @@ properties: > reg: > maxItems: 2 > description: LPAIF core registers > + > reg-names: > - maxItems: 2 > + maxItems: 2 > + > clocks: > minItems: 3 > maxItems: 6 > @@ -39,8 +41,10 @@ properties: > interrupts: > maxItems: 2 > description: LPAIF DMA buffer interrupt > + > interrupt-names: > maxItems: 2 > + > qcom,adsp: > $ref: /schemas/types.yaml#/definitions/phandle > description: Phandle for the audio DSP node > @@ -141,31 +145,31 @@ allOf: > properties: > clock-names: > oneOf: > - - items: #for I2S > - - const: pcnoc-sway-clk > - - const: audio-core > - - const: mclk0 > - - const: pcnoc-mport-clk > - - const: mi2s-bit-clk0 > - - const: mi2s-bit-clk1 > - - items: #for HDMI > - - const: pcnoc-sway-clk > - - const: audio-core > - - const: pcnoc-mport-clk > + - items: #for I2S > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: mclk0 > + - const: pcnoc-mport-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + - items: #for HDMI > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: pcnoc-mport-clk > reg-names: > anyOf: > - items: #for I2S > - - const: lpass-lpaif > + - const: lpass-lpaif > - items: #for I2S and HDMI > - - const: lpass-hdmiif > - - const: lpass-lpaif > + - const: lpass-hdmiif > + - const: lpass-lpaif > interrupt-names: > anyOf: > - items: #for I2S > - - const: lpass-irq-lpaif > + - const: lpass-irq-lpaif > - items: #for I2S and HDMI > - - const: lpass-irq-lpaif > - - const: lpass-irq-hdmi > + - const: lpass-irq-lpaif > + - const: lpass-irq-hdmi > required: > - iommus > - power-domains > diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml > index e35d3053250a..960e2bd66a97 100644 > --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml > +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml > @@ -33,8 +33,8 @@ properties: > compatible: > items: > - enum: > - - arm,sp804 > - - hisilicon,sp804 > + - arm,sp804 > + - hisilicon,sp804 > - const: arm,primecell > > interrupts: > @@ -58,11 +58,11 @@ properties: > clock is used for all clock inputs. > oneOf: > - items: > - - description: clock for timer 1 > - - description: clock for timer 2 > - - description: bus clock > + - description: clock for timer 1 > + - description: clock for timer 2 > + - description: bus clock > - items: > - - description: unified clock for both timers and the bus > + - description: unified clock for both timers and the bus > > clock-names: true > # The original binding did not specify any clock names, and there is no > diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > index ac20b98e9910..d6af2794d444 100644 > --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > @@ -44,8 +44,8 @@ properties: > enum: [super-speed, high-speed, full-speed] > > phys: > - minItems: 1 > - maxItems: 2 > + minItems: 1 > + maxItems: 2 > > phy-names: > minItems: 1 > diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > index 5fe9e6211ba2..52ceb07294a3 100644 > --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml > @@ -17,7 +17,7 @@ description: |- > > properties: > compatible: > - const: ti,hd3ss3220 > + const: ti,hd3ss3220 > > reg: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > index 1aaf3e768c81..55adea827c34 100644 > --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml > @@ -15,10 +15,10 @@ properties: > - const: fsl,imx21-owire > - items: > - enum: > - - fsl,imx27-owire > - - fsl,imx50-owire > - - fsl,imx51-owire > - - fsl,imx53-owire > + - fsl,imx27-owire > + - fsl,imx50-owire > + - fsl,imx51-owire > + - fsl,imx53-owire > - const: fsl,imx21-owire > > reg: > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index 31f085d8ab13..526bbd63924b 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba TC358775 DSI to LVDS bridge bindings maintainers: - - Vinay Simha BN <simhavcs@gmail.com> + - Vinay Simha BN <simhavcs@gmail.com> description: | This binding supports DSI to LVDS bridge TC358775 @@ -29,7 +29,7 @@ properties: vdd-supply: maxItems: 1 - description: 1.2V LVDS Power Supply + description: 1.2V LVDS Power Supply vddio-supply: maxItems: 1 @@ -77,13 +77,13 @@ properties: - port@1 required: - - compatible - - reg - - vdd-supply - - vddio-supply - - stby-gpios - - reset-gpios - - ports + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports examples: - | diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index c60b3bd74337..b2fcec4f22fd 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,9 +13,8 @@ properties: compatible: items: - enum: - - bananapi,lhr050h41 - - feixin,k101-im2byl02 - + - bananapi,lhr050h41 + - feixin,k101-im2byl02 - const: ilitek,ili9881c backlight: true diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 9810619a2b5c..744973637678 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -81,14 +81,14 @@ properties: at25,byte-len: $ref: /schemas/types.yaml#/definitions/uint32 description: - Total eeprom size in bytes. Deprecated, use "size" property instead. + Total eeprom size in bytes. Deprecated, use "size" property instead. deprecated: true at25,addr-mode: $ref: /schemas/types.yaml#/definitions/uint32 description: - Addr-mode flags, as defined in include/linux/spi/eeprom.h. - Deprecated, use "address-width" property instead. + Addr-mode flags, as defined in include/linux/spi/eeprom.h. + Deprecated, use "address-width" property instead. deprecated: true at25,page-size: diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml index e2d2c10e536a..b032471831e7 100644 --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -43,8 +43,8 @@ properties: gpio-controller: true gpio-line-names: - minItems: 1 - maxItems: 8 + minItems: 1 + maxItems: 8 required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml index 0e7b4b8a7e48..e1e65eb4f795 100644 --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -19,11 +19,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4770-i2c - - ingenic,x1000-i2c + - ingenic,jz4770-i2c + - ingenic,x1000-i2c - items: - - const: ingenic,jz4780-i2c - - const: ingenic,jz4770-i2c + - const: ingenic,jz4780-i2c + - const: ingenic,jz4770-i2c reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml index 6feafb7e531e..930f9e3904d7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -43,4 +43,5 @@ examples: vref-supply = <&adc_vref>; }; }; -... \ No newline at end of file +... + diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index d3733ad8785a..8f32800fe5b7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -46,7 +46,8 @@ properties: spi-max-frequency: true spi-cpol: true - spi-cpha : true + + spi-cpha: true "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml index 5d92b477e23f..4e695b97d015 100644 --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -22,8 +22,8 @@ properties: adc-reserved-channels: $ref: /schemas/types.yaml#/definitions/uint32 description: - Bitmask of reserved channels, i.e. channels that cannot be - used by the OS. + Bitmask of reserved channels, i.e. channels that cannot be + used by the OS. clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 9514c3381c42..52490cbb0af0 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -21,7 +21,7 @@ properties: gpios: description: - GPIO used for controlling the reset pin + GPIO used for controlling the reset pin maxItems: 1 spi-max-frequency: true diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index bbf79d125675..1c4c009dedd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -94,12 +94,12 @@ properties: instances. required: - - compatible - - reg - - interrupts - - interrupt-names - - interrupt-controller - - "#interrupt-cells" + - compatible + - reg + - interrupts + - interrupt-names + - interrupt-controller + - "#interrupt-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml index 074243c40891..08af356f5d27 100644 --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) - const: ene,kb3930 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 58fe9d02a781..0753289fba84 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -32,11 +32,11 @@ allOf: clock-output-names: oneOf: - items: - - const: clk_out_sd0 - - const: clk_in_sd0 + - const: clk_out_sd0 + - const: clk_in_sd0 - items: - - const: clk_out_sd1 - - const: clk_in_sd1 + - const: clk_out_sd1 + - const: clk_in_sd1 properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index ac79f3adf20b..2cd859066462 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -3,7 +3,7 @@ %YAML 1.2 --- $id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" -$schema : "http://devicetree.org/meta-schemas/core.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" title: TI AM654 MMC Controller @@ -163,13 +163,12 @@ properties: ti,driver-strength-ohm: description: DLL drive strength in ohms $ref: "/schemas/types.yaml#/definitions/uint32" - oneOf: - - enum: - - 33 - - 40 - - 50 - - 66 - - 100 + enum: + - 33 + - 40 + - 50 + - 66 + - 100 ti,strobe-sel: description: strobe select delay for HS400 speed mode. diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index f4292d2c54e3..d6cf8a560ef0 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -29,16 +29,16 @@ properties: reg-names: oneOf: - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space + - const: dbi + - const: dbi2 + - const: link + - const: addr_space - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space - - const: atu + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - const: atu clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml index bab2ff4d9dc9..34756347a14e 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -31,10 +31,10 @@ properties: clock-names: oneOf: - items: # for PXs2 - - const: link + - const: link - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index 15207ca9548f..ab77a65c5c55 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: OMAP USB2 PHY maintainers: - - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com> + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@ti.com> properties: compatible: oneOf: - items: - - enum: - - ti,dra7x-usb2 - - ti,dra7x-usb2-phy2 - - ti,am654-usb2 - - enum: - - ti,omap-usb2 + - enum: + - ti,dra7x-usb2 + - ti,dra7x-usb2-phy2 + - ti,am654-usb2 + - enum: + - ti,omap-usb2 - items: - - const: ti,am437x-usb2 + - const: ti,am437x-usb2 - items: - - const: ti,omap-usb2 + - const: ti,omap-usb2 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index 33391d30c00c..ccdd9e3820d7 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: items: oneOf: - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp, - rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, - rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, - i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, - ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, - ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, - dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, - dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, - spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, - dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, - uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, - pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, - dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, - nand_ceb3_mfp] + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, + nand_ceb3_mfp] minItems: 1 maxItems: 32 @@ -100,10 +100,10 @@ patternProperties: Specify the alternative function to be configured for the given gpio pin groups. enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, - sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, - i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, - p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, - mipi_csi, nand, spdif, ts, lcd0] + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, + mipi_csi, nand, spdif, ts, lcd0] required: - groups @@ -126,14 +126,14 @@ patternProperties: items: oneOf: - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv, - rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, - i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, - lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, - sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, - spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, - i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, - sens0_ckout_drv, uart3_all_drv] + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, + sens0_ckout_drv, uart3_all_drv] minItems: 1 maxItems: 32 @@ -144,29 +144,29 @@ patternProperties: items: oneOf: - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen, - eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, - i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, - ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, - lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, - lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, - dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, - dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, - sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, - uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, - sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, - dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, - uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, - i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, - csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, - csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, - dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, - dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, - pkg2, pkg3] + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, + pkg2, pkg3] minItems: 1 maxItems: 64 diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index 5556def6b99b..c4c071211611 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -106,7 +106,7 @@ patternProperties: required: - pinmux - additionalProperties: false + additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 1f0f5757f9e1..040d2ada3669 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -71,9 +71,9 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index d0d1a01140ea..9f1dab0c2430 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -40,24 +40,24 @@ patternProperties: Function to mux. $ref: "/schemas/types.yaml#/definitions/string" enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, - spi0, spi1, spi2, spi3, spi4, spi5, spi6, - uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] + spi0, spi1, spi2, spi3, spi4, spi5, spi6, + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] groups: description: Name of the pin group to use for the functions. $ref: "/schemas/types.yaml#/definitions/string" enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, - uart0_grp, uart1_grp, uart2_grp, uart3_grp, - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, + uart0_grp, uart1_grp, uart2_grp, uart3_grp, + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] drive-strength: enum: [2, 4, 6, 8, 16, 24, 32] diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index a6c91026d4cc..a2dca38577f7 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -28,9 +28,9 @@ description: | properties: mode-normal: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Default value to set on a reboot if no command was provided. + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default value to set on a reboot if no command was provided. patternProperties: "^mode-.*$": diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml index 867e3e6b7e80..76c227a7cd5c 100644 --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml @@ -15,10 +15,10 @@ properties: oneOf: - const: ingenic,jz4740-battery - items: - - enum: - - ingenic,jz4725b-battery - - ingenic,jz4770-battery - - const: ingenic,jz4740-battery + - enum: + - ingenic,jz4725b-battery + - ingenic,jz4770-battery + - const: ingenic,jz4740-battery io-channels: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml index 193a23af2007..983fc215c1e5 100644 --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -84,12 +84,12 @@ allOf: then: properties: summit,mains-current-limit-microamp: - enum: [ 300000, 500000, 700000, 1000000, - 1500000, 1800000, 2000000] + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] summit,usb-current-limit-microamp: - enum: [ 300000, 500000, 700000, 1000000, - 1500000, 1800000, 2000000] + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] summit,charge-current-compensation-microamp: enum: [200000, 450000, 600000, 900000] @@ -97,12 +97,12 @@ allOf: else: properties: summit,mains-current-limit-microamp: - enum: [ 300000, 500000, 700000, 900000, 1200000, - 1500000, 1800000, 2000000, 2200000, 2500000] + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] summit,usb-current-limit-microamp: - enum: [ 300000, 500000, 700000, 900000, 1200000, - 1500000, 1800000, 2000000, 2200000, 2500000] + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] summit,charge-current-compensation-microamp: enum: [250000, 700000, 900000, 1200000] diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 3f4a1939554d..efc0198eeb74 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -25,8 +25,8 @@ select: properties: compatible: items: - - enum: - - sifive,fu540-c000-ccache + - enum: + - sifive,fu540-c000-ccache required: - compatible diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml index 4ad1e456a801..07f6ff89bcc1 100644 --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml @@ -19,9 +19,9 @@ properties: - const: fsl,imx21-rnga - items: - enum: - - fsl,imx6sl-rngb - - fsl,imx6sll-rngb - - fsl,imx6ull-rngb + - fsl,imx6sl-rngb + - fsl,imx6sll-rngb + - fsl,imx6ull-rngb - const: fsl,imx25-rngb - const: fsl,imx35-rngc diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 9ff85bc6859c..9702c07a6b6c 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -20,30 +20,30 @@ properties: - const: fsl,imx21-uart - items: - enum: - - fsl,imx25-uart - - fsl,imx27-uart - - fsl,imx31-uart - - fsl,imx35-uart - - fsl,imx50-uart - - fsl,imx51-uart - - fsl,imx53-uart - - fsl,imx6q-uart + - fsl,imx25-uart + - fsl,imx27-uart + - fsl,imx31-uart + - fsl,imx35-uart + - fsl,imx50-uart + - fsl,imx51-uart + - fsl,imx53-uart + - fsl,imx6q-uart - const: fsl,imx21-uart - items: - enum: - - fsl,imx6sl-uart - - fsl,imx6sll-uart - - fsl,imx6sx-uart + - fsl,imx6sl-uart + - fsl,imx6sll-uart + - fsl,imx6sx-uart - const: fsl,imx6q-uart - const: fsl,imx21-uart - items: - enum: - - fsl,imx6ul-uart - - fsl,imx7d-uart - - fsl,imx8mm-uart - - fsl,imx8mn-uart - - fsl,imx8mp-uart - - fsl,imx8mq-uart + - fsl,imx6ul-uart + - fsl,imx7d-uart + - fsl,imx8mm-uart + - fsl,imx8mn-uart + - fsl,imx8mp-uart + - fsl,imx8mq-uart - const: fsl,imx6q-uart reg: diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml index 7d8bd4e14434..4a2129005c0f 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml @@ -10,8 +10,8 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Receiver is a - serial port compliant with the IEC-60958 standard. + The Microchip Sony/Philips Digital Interface Receiver is a serial port + compliant with the IEC-60958 standard. properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml index a03b0b871fc9..bdfb63387c53 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -10,8 +10,8 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Transmitter is a - serial port compliant with the IEC-60958 standard. + The Microchip Sony/Philips Digital Interface Transmitter is a serial port + compliant with the IEC-60958 standard. properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index f6f9fb49f385..1e23c0e20bc1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -26,8 +26,10 @@ properties: reg: maxItems: 2 description: LPAIF core registers + reg-names: - maxItems: 2 + maxItems: 2 + clocks: minItems: 3 maxItems: 6 @@ -39,8 +41,10 @@ properties: interrupts: maxItems: 2 description: LPAIF DMA buffer interrupt + interrupt-names: maxItems: 2 + qcom,adsp: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle for the audio DSP node @@ -141,31 +145,31 @@ allOf: properties: clock-names: oneOf: - - items: #for I2S - - const: pcnoc-sway-clk - - const: audio-core - - const: mclk0 - - const: pcnoc-mport-clk - - const: mi2s-bit-clk0 - - const: mi2s-bit-clk1 - - items: #for HDMI - - const: pcnoc-sway-clk - - const: audio-core - - const: pcnoc-mport-clk + - items: #for I2S + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - items: #for HDMI + - const: pcnoc-sway-clk + - const: audio-core + - const: pcnoc-mport-clk reg-names: anyOf: - items: #for I2S - - const: lpass-lpaif + - const: lpass-lpaif - items: #for I2S and HDMI - - const: lpass-hdmiif - - const: lpass-lpaif + - const: lpass-hdmiif + - const: lpass-lpaif interrupt-names: anyOf: - items: #for I2S - - const: lpass-irq-lpaif + - const: lpass-irq-lpaif - items: #for I2S and HDMI - - const: lpass-irq-lpaif - - const: lpass-irq-hdmi + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi required: - iommus - power-domains diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml index e35d3053250a..960e2bd66a97 100644 --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml @@ -33,8 +33,8 @@ properties: compatible: items: - enum: - - arm,sp804 - - hisilicon,sp804 + - arm,sp804 + - hisilicon,sp804 - const: arm,primecell interrupts: @@ -58,11 +58,11 @@ properties: clock is used for all clock inputs. oneOf: - items: - - description: clock for timer 1 - - description: clock for timer 2 - - description: bus clock + - description: clock for timer 1 + - description: clock for timer 2 + - description: bus clock - items: - - description: unified clock for both timers and the bus + - description: unified clock for both timers and the bus clock-names: true # The original binding did not specify any clock names, and there is no diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index ac20b98e9910..d6af2794d444 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -44,8 +44,8 @@ properties: enum: [super-speed, high-speed, full-speed] phys: - minItems: 1 - maxItems: 2 + minItems: 1 + maxItems: 2 phy-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 5fe9e6211ba2..52ceb07294a3 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,hd3ss3220 + const: ti,hd3ss3220 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml index 1aaf3e768c81..55adea827c34 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml @@ -15,10 +15,10 @@ properties: - const: fsl,imx21-owire - items: - enum: - - fsl,imx27-owire - - fsl,imx50-owire - - fsl,imx51-owire - - fsl,imx53-owire + - fsl,imx27-owire + - fsl,imx50-owire + - fsl,imx51-owire + - fsl,imx53-owire - const: fsl,imx21-owire reg:
Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (now integrated into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../display/bridge/toshiba,tc358775.yaml | 18 ++-- .../display/panel/ilitek,ili9881c.yaml | 5 +- .../devicetree/bindings/eeprom/at25.yaml | 6 +- .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +- .../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +- .../bindings/iio/adc/adi,ad7291.yaml | 3 +- .../bindings/iio/adc/adi,ad7768-1.yaml | 3 +- .../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +- .../bindings/iio/adc/holt,hi8435.yaml | 2 +- .../interrupt-controller/ti,pruss-intc.yaml | 12 +-- .../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +- .../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +- .../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++- .../pci/socionext,uniphier-pcie-ep.yaml | 18 ++-- .../phy/socionext,uniphier-ahci-phy.yaml | 6 +- .../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++-- .../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++--------- .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- .../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +- .../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++--- .../bindings/power/reset/reboot-mode.yaml | 6 +- .../power/supply/ingenic,battery.yaml | 8 +- .../power/supply/summit,smb347-charger.yaml | 16 +-- .../bindings/riscv/sifive-l2-cache.yaml | 4 +- .../devicetree/bindings/rng/imx-rng.yaml | 6 +- .../bindings/serial/fsl-imx-uart.yaml | 34 +++--- .../bindings/sound/mchp,spdifrx.yaml | 4 +- .../bindings/sound/mchp,spdiftx.yaml | 4 +- .../bindings/sound/qcom,lpass-cpu.yaml | 40 +++---- .../devicetree/bindings/timer/arm,sp804.yaml | 12 +-- .../devicetree/bindings/usb/cdns,usb3.yaml | 4 +- .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- .../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +- 33 files changed, 210 insertions(+), 206 deletions(-)