Message ID | 20201007152506.66217-3-sven.auhagen@voleatech.de |
---|---|
State | Superseded |
Headers | show |
Series | igb: xdp patches followup | expand |
On Wed, Oct 07, 2020 at 05:25:01PM +0200, sven.auhagen@voleatech.de wrote: > From: Sven Auhagen <sven.auhagen@voleatech.de> > > Increase the packet header padding to include double VLAN tagging. > This patch uses a macro for this. > > Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> > --- > drivers/net/ethernet/intel/igb/igb.h | 5 +++++ > drivers/net/ethernet/intel/igb/igb_main.c | 7 +++---- > 2 files changed, 8 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h > index 0286d2fceee4..7afb67cf9b94 100644 > --- a/drivers/net/ethernet/intel/igb/igb.h > +++ b/drivers/net/ethernet/intel/igb/igb.h > @@ -138,6 +138,8 @@ struct vf_mac_filter { > /* this is the size past which hardware will drop packets when setting LPE=0 */ > #define MAXIMUM_ETHERNET_VLAN_SIZE 1522 > > +#define IGB_ETH_PKT_HDR_PAD (ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2)) > + > /* Supported Rx Buffer Sizes */ > #define IGB_RXBUFFER_256 256 > #define IGB_RXBUFFER_1536 1536 > @@ -247,6 +249,9 @@ enum igb_tx_flags { > #define IGB_SFF_ADDRESSING_MODE 0x4 > #define IGB_SFF_8472_UNSUP 0x00 > > +/* TX ressources are shared between XDP and netstack > + * and we need to tag the buffer type to distinguish them > + */ s/ressources/resources/ This comment sort of does not belong to this commit but I'm not sure what place would be better. > enum igb_tx_buf_type { > IGB_TYPE_SKB = 0, > IGB_TYPE_XDP, > diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c > index 08cc6f59aa2e..0a9198037b98 100644 > --- a/drivers/net/ethernet/intel/igb/igb_main.c > +++ b/drivers/net/ethernet/intel/igb/igb_main.c > @@ -2826,7 +2826,7 @@ static int igb_setup_tc(struct net_device *dev, enum tc_setup_type type, > > static int igb_xdp_setup(struct net_device *dev, struct bpf_prog *prog) > { > - int i, frame_size = dev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; > + int i, frame_size = dev->mtu + IGB_ETH_PKT_HDR_PAD; > struct igb_adapter *adapter = netdev_priv(dev); > bool running = netif_running(dev); > struct bpf_prog *old_prog; > @@ -3950,8 +3950,7 @@ static int igb_sw_init(struct igb_adapter *adapter) > /* set default work limits */ > adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; > > - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + > - VLAN_HLEN; > + adapter->max_frame_size = netdev->mtu + IGB_ETH_PKT_HDR_PAD; > adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; > > spin_lock_init(&adapter->nfc_lock); > @@ -6491,7 +6490,7 @@ static void igb_get_stats64(struct net_device *netdev, > static int igb_change_mtu(struct net_device *netdev, int new_mtu) > { > struct igb_adapter *adapter = netdev_priv(netdev); > - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; > + int max_frame = new_mtu + IGB_ETH_PKT_HDR_PAD; > > if (adapter->xdp_prog) { > int i; > -- > 2.20.1 >
On Wed, Oct 07, 2020 at 11:06:15PM +0200, Maciej Fijalkowski wrote: > On Wed, Oct 07, 2020 at 05:25:01PM +0200, sven.auhagen@voleatech.de wrote: > > From: Sven Auhagen <sven.auhagen@voleatech.de> > > > > Increase the packet header padding to include double VLAN tagging. > > This patch uses a macro for this. > > > > Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> > > --- > > drivers/net/ethernet/intel/igb/igb.h | 5 +++++ > > drivers/net/ethernet/intel/igb/igb_main.c | 7 +++---- > > 2 files changed, 8 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h > > index 0286d2fceee4..7afb67cf9b94 100644 > > --- a/drivers/net/ethernet/intel/igb/igb.h > > +++ b/drivers/net/ethernet/intel/igb/igb.h > > @@ -138,6 +138,8 @@ struct vf_mac_filter { > > /* this is the size past which hardware will drop packets when setting LPE=0 */ > > #define MAXIMUM_ETHERNET_VLAN_SIZE 1522 > > > > +#define IGB_ETH_PKT_HDR_PAD (ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2)) > > + > > /* Supported Rx Buffer Sizes */ > > #define IGB_RXBUFFER_256 256 > > #define IGB_RXBUFFER_1536 1536 > > @@ -247,6 +249,9 @@ enum igb_tx_flags { > > #define IGB_SFF_ADDRESSING_MODE 0x4 > > #define IGB_SFF_8472_UNSUP 0x00 > > > > +/* TX ressources are shared between XDP and netstack > > + * and we need to tag the buffer type to distinguish them > > + */ > > s/ressources/resources/ > > This comment sort of does not belong to this commit but I'm not sure what > place would be better. I had the same problem. I don't think it is enough for an extra patch so I just added it here. I fix the spelling. > > > enum igb_tx_buf_type { > > IGB_TYPE_SKB = 0, > > IGB_TYPE_XDP, > > diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c > > index 08cc6f59aa2e..0a9198037b98 100644 > > --- a/drivers/net/ethernet/intel/igb/igb_main.c > > +++ b/drivers/net/ethernet/intel/igb/igb_main.c > > @@ -2826,7 +2826,7 @@ static int igb_setup_tc(struct net_device *dev, enum tc_setup_type type, > > > > static int igb_xdp_setup(struct net_device *dev, struct bpf_prog *prog) > > { > > - int i, frame_size = dev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; > > + int i, frame_size = dev->mtu + IGB_ETH_PKT_HDR_PAD; > > struct igb_adapter *adapter = netdev_priv(dev); > > bool running = netif_running(dev); > > struct bpf_prog *old_prog; > > @@ -3950,8 +3950,7 @@ static int igb_sw_init(struct igb_adapter *adapter) > > /* set default work limits */ > > adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; > > > > - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + > > - VLAN_HLEN; > > + adapter->max_frame_size = netdev->mtu + IGB_ETH_PKT_HDR_PAD; > > adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; > > > > spin_lock_init(&adapter->nfc_lock); > > @@ -6491,7 +6490,7 @@ static void igb_get_stats64(struct net_device *netdev, > > static int igb_change_mtu(struct net_device *netdev, int new_mtu) > > { > > struct igb_adapter *adapter = netdev_priv(netdev); > > - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; > > + int max_frame = new_mtu + IGB_ETH_PKT_HDR_PAD; > > > > if (adapter->xdp_prog) { > > int i; > > -- > > 2.20.1 > >
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 0286d2fceee4..7afb67cf9b94 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -138,6 +138,8 @@ struct vf_mac_filter { /* this is the size past which hardware will drop packets when setting LPE=0 */ #define MAXIMUM_ETHERNET_VLAN_SIZE 1522 +#define IGB_ETH_PKT_HDR_PAD (ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2)) + /* Supported Rx Buffer Sizes */ #define IGB_RXBUFFER_256 256 #define IGB_RXBUFFER_1536 1536 @@ -247,6 +249,9 @@ enum igb_tx_flags { #define IGB_SFF_ADDRESSING_MODE 0x4 #define IGB_SFF_8472_UNSUP 0x00 +/* TX ressources are shared between XDP and netstack + * and we need to tag the buffer type to distinguish them + */ enum igb_tx_buf_type { IGB_TYPE_SKB = 0, IGB_TYPE_XDP, diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 08cc6f59aa2e..0a9198037b98 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2826,7 +2826,7 @@ static int igb_setup_tc(struct net_device *dev, enum tc_setup_type type, static int igb_xdp_setup(struct net_device *dev, struct bpf_prog *prog) { - int i, frame_size = dev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + int i, frame_size = dev->mtu + IGB_ETH_PKT_HDR_PAD; struct igb_adapter *adapter = netdev_priv(dev); bool running = netif_running(dev); struct bpf_prog *old_prog; @@ -3950,8 +3950,7 @@ static int igb_sw_init(struct igb_adapter *adapter) /* set default work limits */ adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + - VLAN_HLEN; + adapter->max_frame_size = netdev->mtu + IGB_ETH_PKT_HDR_PAD; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; spin_lock_init(&adapter->nfc_lock); @@ -6491,7 +6490,7 @@ static void igb_get_stats64(struct net_device *netdev, static int igb_change_mtu(struct net_device *netdev, int new_mtu) { struct igb_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + int max_frame = new_mtu + IGB_ETH_PKT_HDR_PAD; if (adapter->xdp_prog) { int i;