| Message ID | 20200909115602.21783-1-nbd@nbd.name |
|---|---|
| State | New |
| Headers | show |
| Series | [5.9,1/2] mac80211: extend AQL aggregation estimation to HE and fix unit mismatch | expand |
Felix Fietkau <nbd@nbd.name> writes: > The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not > milliseconds. s/milli/micro/ here, no? > Adjust the duration checks to account for that. > For higher data rates, allow larger estimated aggregation sizes, and add some > values for HE as well, which can use much larger aggregates. > Since small packets with high data rates can now lead to duration values too > small for info->tx_time_est, return a minimum of 4us. Fixes: tag? -Toke
On 2020-09-10 12:13, Toke Høiland-Jørgensen wrote: > Felix Fietkau <nbd@nbd.name> writes: > >> The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not >> milliseconds. > > s/milli/micro/ here, no? Right. >> Adjust the duration checks to account for that. >> For higher data rates, allow larger estimated aggregation sizes, and add some >> values for HE as well, which can use much larger aggregates. >> Since small packets with high data rates can now lead to duration values too >> small for info->tx_time_est, return a minimum of 4us. > > Fixes: tag? Will add it and send v2. Thanks, - Felix
diff --git a/net/mac80211/airtime.c b/net/mac80211/airtime.c index 314973033d03..45140e535151 100644 --- a/net/mac80211/airtime.c +++ b/net/mac80211/airtime.c @@ -668,20 +668,26 @@ u32 ieee80211_calc_expected_tx_airtime(struct ieee80211_hw *hw, * This will not be very accurate, but much better than simply * assuming un-aggregated tx in all cases. */ - if (duration > 400) /* <= VHT20 MCS2 1S */ + if (duration > 400 * 1024) /* <= VHT20 MCS2 1S */ agg_shift = 1; - else if (duration > 250) /* <= VHT20 MCS3 1S or MCS1 2S */ + else if (duration > 250 * 1024) /* <= VHT20 MCS3 1S or MCS1 2S */ agg_shift = 2; - else if (duration > 150) /* <= VHT20 MCS5 1S or MCS3 2S */ + else if (duration > 150 * 1024) /* <= VHT20 MCS5 1S or MCS2 2S */ agg_shift = 3; - else + else if (duration > 70 * 1024) /* <= VHT20 MCS5 2S */ agg_shift = 4; + else if (stat.encoding != RX_ENC_HE || + duration > 20 * 1024) /* <= HE40 MCS6 2S */ + agg_shift = 5; + else + agg_shift = 6; duration *= len; duration /= AVG_PKT_SIZE; duration /= 1024; + duration += (overhead >> agg_shift); - return duration + (overhead >> agg_shift); + return max_t(u32, duration, 4); } if (!conf)
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not milliseconds. Adjust the duration checks to account for that. For higher data rates, allow larger estimated aggregation sizes, and add some values for HE as well, which can use much larger aggregates. Since small packets with high data rates can now lead to duration values too small for info->tx_time_est, return a minimum of 4us. Signed-off-by: Felix Fietkau <nbd@nbd.name> --- net/mac80211/airtime.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)