@@ -801,6 +801,52 @@ bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
}
EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging);
+/**
+ * blk_queue_set_zoned - configure a disk queue zoned model.
+ * @disk: the gendisk of the queue to configure
+ * @model: the zoned model to set
+ *
+ * Set the zoned model of the request queue of @disk according to @model.
+ * When @model is BLK_ZONED_HM (host managed), this should be called only
+ * if zoned block device support is enabled (CONFIG_BLK_DEV_ZONED option).
+ * If @model specifies BLK_ZONED_HA (host aware), the effective model used
+ * depends on CONFIG_BLK_DEV_ZONED settings and on the existence of partitions
+ * on the disk.
+ */
+void blk_queue_set_zoned(struct gendisk *disk, enum blk_zoned_model model)
+{
+ switch (model) {
+ case BLK_ZONED_HM:
+ /*
+ * Host managed devices are supported only if
+ * CONFIG_BLK_DEV_ZONED is enabled.
+ */
+ WARN_ON_ONCE(!IS_ENABLED(CONFIG_BLK_DEV_ZONED));
+ break;
+ case BLK_ZONED_HA:
+ /*
+ * Host aware devices can be treated either as regular block
+ * devices (similar to drive managed devices) or as zoned block
+ * devices to take advantage of the zone command set, similarly
+ * to host managed devices. We try the latter if there are no
+ * partitions and zoned block device support is enabled, else
+ * we do nothing special as far as the block layer is concerned.
+ */
+ if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) ||
+ disk_has_partitions(disk))
+ model = BLK_ZONED_NONE;
+ break;
+ case BLK_ZONED_NONE:
+ default:
+ if (WARN_ON_ONCE(model != BLK_ZONED_NONE))
+ model = BLK_ZONED_NONE;
+ break;
+ }
+
+ disk->queue->limits.zoned = model;
+}
+EXPORT_SYMBOL_GPL(blk_queue_set_zoned);
+
static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
@@ -2964,26 +2964,32 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
if (sdkp->device->type == TYPE_ZBC) {
/* Host-managed */
- q->limits.zoned = BLK_ZONED_HM;
+ blk_queue_set_zoned(sdkp->disk, BLK_ZONED_HM);
} else {
sdkp->zoned = (buffer[8] >> 4) & 3;
- if (sdkp->zoned == 1 && !disk_has_partitions(sdkp->disk)) {
+ if (sdkp->zoned == 1) {
/* Host-aware */
- q->limits.zoned = BLK_ZONED_HA;
+ blk_queue_set_zoned(sdkp->disk, BLK_ZONED_HA);
} else {
- /*
- * Treat drive-managed devices and host-aware devices
- * with partitions as regular block devices.
- */
- q->limits.zoned = BLK_ZONED_NONE;
- if (sdkp->zoned == 2 && sdkp->first_scan)
- sd_printk(KERN_NOTICE, sdkp,
- "Drive-managed SMR disk\n");
+ /* Regular disk or drive managed disk */
+ blk_queue_set_zoned(sdkp->disk, BLK_ZONED_NONE);
}
}
- if (blk_queue_is_zoned(q) && sdkp->first_scan)
+
+ if (!sdkp->first_scan)
+ goto out;
+
+ if (blk_queue_is_zoned(q)) {
sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
+ } else {
+ if (sdkp->zoned == 1)
+ sd_printk(KERN_NOTICE, sdkp,
+ "Host-aware SMR disk used as regular disk\n");
+ else if (sdkp->zoned == 2)
+ sd_printk(KERN_NOTICE, sdkp,
+ "Drive-managed SMR disk\n");
+ }
out:
kfree(buffer);
@@ -259,7 +259,7 @@ static inline blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
static inline unsigned int sd_zbc_complete(struct scsi_cmnd *cmd,
unsigned int good_bytes, struct scsi_sense_hdr *sshdr)
{
- return 0;
+ return good_bytes;
}
static inline blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd,
@@ -667,7 +667,11 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
u32 max_append;
int ret = 0;
- if (!sd_is_zoned(sdkp))
+ /*
+ * There is nothing to do for regular disks, including host-aware disks
+ * that have partitions.
+ */
+ if (!blk_queue_is_zoned(q))
return 0;
/*
@@ -352,6 +352,8 @@ struct queue_limits {
typedef int (*report_zones_cb)(struct blk_zone *zone, unsigned int idx,
void *data);
+void blk_queue_set_zoned(struct gendisk *disk, enum blk_zoned_model model);
+
#ifdef CONFIG_BLK_DEV_ZONED
#define BLK_ALL_ZONES ((unsigned int)-1)
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as regular disks. In this case, ensure that command completion is correctly executed by changing sd_zbc_complete() to return good_bytes instead of 0 and causing a hang during device probe (endless retries). When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to have partitions, it will be used as a regular disk. In this case, make sure to not do anything in sd_zbc_revalidate_zones() as that triggers warnings. Since all these different cases result in subtle settings of the disk queue zoned model, introduce the block layer helper function blk_queue_set_zoned() to generically implement setting up the effective zoned model according to the disk type, the presence of partitions on the disk and CONFIG_BLK_DEV_ZONED configuration. Reported-by: Borislav Petkov <bp@alien8.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- block/blk-settings.c | 46 ++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/sd.c | 30 ++++++++++++++++----------- drivers/scsi/sd.h | 2 +- drivers/scsi/sd_zbc.c | 6 +++++- include/linux/blkdev.h | 2 ++ 5 files changed, 72 insertions(+), 14 deletions(-)