| Message ID | 20201021214910.20001-3-l.stelmach@samsung.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/5] dt-bindings: vendor-prefixes: Add asix prefix | expand |
On Wed, 21 Oct 2020 23:49:07 +0200, Łukasz Stelmach wrote: > Add bindings for AX88796C SPI Ethernet Adapter. > > Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> > --- > .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/net/asix,ax88796c.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/asix,ax88796c.yaml# Documentation/devicetree/bindings/net/asix,ax88796c.example.dts:20:18: fatal error: dt-bindings/interrupt-controller/gpio.h: No such file or directory 20 | #include <dt-bindings/interrupt-controller/gpio.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1366: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1385812 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Fri, 23 Oct 2020 at 18:05, Rob Herring <robh@kernel.org> wrote: > > On Wed, 21 Oct 2020 23:49:07 +0200, Łukasz Stelmach wrote: > > Add bindings for AX88796C SPI Ethernet Adapter. > > > > Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> > > --- > > .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ > > 1 file changed, 69 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml > > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > ./Documentation/devicetree/bindings/net/asix,ax88796c.yaml: $id: relative path/filename doesn't match actual path or filename > expected: http://devicetree.org/schemas/net/asix,ax88796c.yaml# > Documentation/devicetree/bindings/net/asix,ax88796c.example.dts:20:18: fatal error: dt-bindings/interrupt-controller/gpio.h: No such file or directory Łukasz, So you really did not compile/test these patches... It's the second build failure in the patchset. All sent patches should at least be compiled on the latest kernel, if you cannot test them. However this patchset should be testable - Artik5 should boot on mainline kernel Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..6c4c49fcad66 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - interrupt-parrent + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/gpio.h> + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + };
Add bindings for AX88796C SPI Ethernet Adapter. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> --- .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml