Message ID | 20200920180758.592217-1-peron.clem@gmail.com |
---|---|
Headers | show |
Series | Add Allwinner H3/H5/H6/A64 HDMI audio | expand |
On 9/20/20 1:07 PM, Clément Péron wrote: > From: Marcus Cooper <codekipper@gmail.com> > > Extend the functionality of the driver to include support of 20 and > 24 bits per sample. > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > Signed-off-by: Clément Péron <peron.clem@gmail.com> > Acked-by: Maxime Ripard <mripard@kernel.org> > --- > sound/soc/sunxi/sun4i-i2s.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > As I have mentioned before, if you want to support a 32-bit slot width on sun4i variants (which patch 2 does via TDM and this patch does via PCM format), you need to fix sun4i_i2s_get_wss() to return "3", not "4", for a 32-bit input. Cheers, Samuel
Hi Samuel, On Sun, 20 Sep 2020 at 20:39, Samuel Holland <samuel@sholland.org> wrote: > > On 9/20/20 1:07 PM, Clément Péron wrote: > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > > > H6 I2S is very similar to that in H3, except it supports up to 16 > > channels. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > --- > > sound/soc/sunxi/sun4i-i2s.c | 218 ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 218 insertions(+) > > > > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c > > index f23ff29e7c1d..348057464bed 100644 > > --- a/sound/soc/sunxi/sun4i-i2s.c > > +++ b/sound/soc/sunxi/sun4i-i2s.c > ... > > @@ -699,6 +770,102 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s, > > return 0; > > } > > > > +static int sun50i_h6_i2s_set_soc_fmt(const struct sun4i_i2s *i2s, > > + unsigned int fmt) > > +{ > > + u32 mode, val; > > + u8 offset; > > + > > + /* DAI clock polarity */ > > + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { > > + case SND_SOC_DAIFMT_IB_IF: > > + /* Invert both clocks */ > > + val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED | > > + SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED; > > + break; > > + case SND_SOC_DAIFMT_IB_NF: > > + /* Invert bit clock */ > > + val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED; > > + break; > > + case SND_SOC_DAIFMT_NB_IF: > > + /* Invert frame clock */ > > + val = SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED; > > + break; > > + case SND_SOC_DAIFMT_NB_NF: > > + val = 0; > > + break; > > + default: > > + return -EINVAL; > > + } > > Maxime's testing that showed LRCK inversion was necessary was done on the H6. So > in addition to dropping the patch that removed the LRCK inversion for other > sun8i variants, you need to re-add it to this patch for the H6 variant. Thanks, you're right! Clement > > Cheers, > Samuel > > > + > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG, > > + SUN8I_I2S_FMT0_LRCLK_POLARITY_MASK | > > + SUN8I_I2S_FMT0_BCLK_POLARITY_MASK, > > + val); > > + > > + /* DAI Mode */ > > + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { > > + case SND_SOC_DAIFMT_DSP_A: > > + mode = SUN8I_I2S_CTRL_MODE_PCM; > > + offset = 1; > > + break; > > + > > + case SND_SOC_DAIFMT_DSP_B: > > + mode = SUN8I_I2S_CTRL_MODE_PCM; > > + offset = 0; > > + break; > > + > > + case SND_SOC_DAIFMT_I2S: > > + mode = SUN8I_I2S_CTRL_MODE_LEFT; > > + offset = 1; > > + break; > > + > > + case SND_SOC_DAIFMT_LEFT_J: > > + mode = SUN8I_I2S_CTRL_MODE_LEFT; > > + offset = 0; > > + break; > > + > > + case SND_SOC_DAIFMT_RIGHT_J: > > + mode = SUN8I_I2S_CTRL_MODE_RIGHT; > > + offset = 0; > > + break; > > + > > + default: > > + return -EINVAL; > > + } > > + > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG, > > + SUN8I_I2S_CTRL_MODE_MASK, mode); > > + regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG, > > + SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK, > > + SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset)); > > + regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG, > > + SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK, > > + SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset)); > > + > > + /* DAI clock master masks */ > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > + case SND_SOC_DAIFMT_CBS_CFS: > > + /* BCLK and LRCLK master */ > > + val = SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT; > > + break; > > + > > + case SND_SOC_DAIFMT_CBM_CFM: > > + /* BCLK and LRCLK slave */ > > + val = 0; > > + break; > > + > > + default: > > + return -EINVAL; > > + } > > + > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG, > > + SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT, > > + val); > > + > > + return 0; > > +} > > + > > static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) > > { > > struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai); > ...
Hi Samuel, On Sun, 20 Sep 2020 at 20:52, Samuel Holland <samuel@sholland.org> wrote: > > On 9/20/20 1:07 PM, Clément Péron wrote: > > The FIFO TX reg is volatile and sun8i i2s register > > mapping is different from sun4i. > > > > Even if in this case it's doesn't create an issue, > > Avoid setting some regs that are undefined in sun8i. > > > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > Acked-by: Maxime Ripard <mripard@kernel.org> > > --- > > sound/soc/sunxi/sun4i-i2s.c | 15 +++++++++++---- > > 1 file changed, 11 insertions(+), 4 deletions(-) > > > > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c > > index ce4913f0ffe4..a35be0e2baf5 100644 > > --- a/sound/soc/sunxi/sun4i-i2s.c > > +++ b/sound/soc/sunxi/sun4i-i2s.c > > @@ -1126,12 +1126,19 @@ static bool sun8i_i2s_rd_reg(struct device *dev, unsigned int reg) > > > > static bool sun8i_i2s_volatile_reg(struct device *dev, unsigned int reg) > > { > > - if (reg == SUN8I_I2S_INT_STA_REG) > > + switch (reg) { > > + case SUN4I_I2S_FIFO_CTRL_REG: > > Please check if this breaks audio recording with runtime PM enabled. I noticed > this with an older revision of the series that also changed > sun4i_i2s_volatile_reg. Marking SUN4I_I2S_FIFO_CTRL_REG as volatile broke > setting of SUN4I_I2S_FIFO_CTRL_TX_MODE/RX_MODE, because the set_fmt() callback > is not run with a runtime PM reference held, and volatile registers are not > written by regcache_sync() during sun4i_i2s_runtime_resume(). > > As a workaround, I moved the TX_MODE/RX_MODE initialization to hw_params(), but > I am not sure it is the right thing to do: Thanks for the catch, I never tried to suspend/resume my board actually. But your explanation and the fix seems legit to me. I don't think it's a workaround as settings the fifo size is not related to set_fmt and could also be set in hw_params. I will add your fix in the next version. Regards, Clement > > https://github.com/smaeul/linux/commit/5e40ac610986.patch > > Cheers, > Samuel > > > + case SUN4I_I2S_FIFO_RX_REG: > > + case SUN4I_I2S_FIFO_STA_REG: > > + case SUN4I_I2S_RX_CNT_REG: > > + case SUN4I_I2S_TX_CNT_REG: > > + case SUN8I_I2S_FIFO_TX_REG: > > + case SUN8I_I2S_INT_STA_REG: > > return true; > > - if (reg == SUN8I_I2S_FIFO_TX_REG) > > - return false; > > > > - return sun4i_i2s_volatile_reg(dev, reg); > > + default: > > + return false; > > + } > > } > > > > static const struct reg_default sun4i_i2s_reg_defaults[] = { > > >