| Message ID | 20201001152148.29747-1-l.stelmach@samsung.com |
|---|---|
| Headers | show |
| Series | Some fixes for spi-s3c64xx | expand |
On Thu, Oct 01, 2020 at 05:21:39PM +0200, Łukasz Stelmach wrote: > This is a series of fixes created during porting a device driver (these > patches will be released soon too) for an SPI device to the current kernel. There appeared to be a number of outstanding review comments (misleading commit message on patch 7, some concerns about the non-CMU case), please address those. Please don't send new patches in reply to old ones, it buries them in threads and can make it hard to follow what's going on.
It was <2020-10-01 czw 17:13>, when Mark Brown wrote: > On Thu, Oct 01, 2020 at 05:21:39PM +0200, Łukasz Stelmach wrote: >> This is a series of fixes created during porting a device driver (these >> patches will be released soon too) for an SPI device to the current kernel. > > There appeared to be a number of outstanding review comments (misleading > commit message on patch 7, some concerns about the non-CMU case), please > address those. We discussed with Tomasz Figa and Krzysztof Kozłowski off the list that this is practically unused. Tomasz, Krzysztof, would you be so kind to share the details? Kind regards,
On Thu, Oct 01, 2020 at 08:23:00PM +0200, Lukasz Stelmach wrote: > It was <2020-10-01 czw 17:13>, when Mark Brown wrote: > > On Thu, Oct 01, 2020 at 05:21:39PM +0200, Łukasz Stelmach wrote: > >> This is a series of fixes created during porting a device driver (these > >> patches will be released soon too) for an SPI device to the current kernel. > > > > There appeared to be a number of outstanding review comments (misleading > > commit message on patch 7, some concerns about the non-CMU case), please > > address those. > > We discussed with Tomasz Figa and Krzysztof Kozłowski off the list that > this is practically unused. Tomasz, Krzysztof, would you be so kind to > share the details? That is correct. We did not provide final comments on the list so they could be added here - in change log. This would also be an explanation why there is a resend. Another solution would be to extend the commit #7 description - why only CMU case is covered. About patch #7: The decision was not to correct non-CMU case because there were not actual reports about clock rounding poblems, it would not be trivial change and we do not have the HW to test. Thanks Mark for looking into it. Best regards, Krzysztof
On Thu, 1 Oct 2020 at 21:44, Mark Brown <broonie@kernel.org> wrote: > > On Thu, Oct 01, 2020 at 09:02:57PM +0200, Krzysztof Kozlowski wrote: > > > That is correct. We did not provide final comments on the list so they > > could be added here - in change log. This would also be an explanation > > why there is a resend. Another solution would be to extend the commit #7 > > description - why only CMU case is covered. > > If there's a new changelog then it's not a resend, the changelog is part > of the content so I'd expect a version bump for that alone. IIRC the > changelog needed some clarification anyway? Yes, documenting the non-CMU case in changeloge would be good. It should be also v3 because of another reason: two patches got reordered to a more meaningful position in patchset, which brought minor differences in them. Best regards, Krzysztof
This is a series of fixes created during porting a device driver (these patches will be released soon too) for an SPI device to the current kernel. The two most important are spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath() spi: spi-s3s64xx: Add S3C64XX_SPI_QUIRK_CS_AUTO for Exynos3250 Without them DMA transfers larger than 512 bytes from the SPI controller would fail. Łukasz Stelmach (9): spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath() spi: spi-s3s64xx: Add S3C64XX_SPI_QUIRK_CS_AUTO for Exynos3250 spi: spi-s3c64xx: Check return values spi: spi-s3c64xx: Report more information when errors occur spi: spi-s3c64xx: Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* spi: spi-s3c64xx: Fix doc comment for struct s3c64xx_spi_driver_data spi: spi-s3c64xx: Ensure cur_speed holds actual clock value spi: spi-s3c64xx: Increase transfer timeout spi: spi-s3c64xx: Turn on interrupts upon resume drivers/spi/spi-s3c64xx.c | 111 +++++++++++++++++++++++++++----------- 1 file changed, 79 insertions(+), 32 deletions(-) Changes in v2: - added missing commit descriptions - added spi: spi-s3c64xx: Ensure cur_speed holds actual clock value - implemented error propagation in spi: spi-s3c64xx: Check return values - rebased onto v5.9-rc1 which contains spi: spi-s3c64xx: Add missing entries for structs 's3c64xx_spi_dma_data' and 's3c64xx_spi_dma_data'