diff mbox series

[v7,3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes

Message ID 20200503201823.531757-3-robert.marko@sartura.hr
State New
Headers show
Series None | expand

Commit Message

Robert Marko May 3, 2020, 8:18 p.m. UTC 
From: John Crispin <john@phrozen.org>

Since we now have driver for the USB PHY, lets add the necessary nodes to DTSI.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes from v6 to v7:
* Remove changes to qcom-ipq4019-ap.dk01.1.dtsi
It has slipped in unwanted, we only want to add
nodes to the DTSI.

 arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

Comments

Robert Marko Aug. 6, 2020, 11:06 a.m. UTC | #1 
On Tue, Jun 9, 2020 at 6:19 PM Vinod Koul <vkoul@kernel.org> wrote:
>
> Hi Robert,
>
> On 09-06-20, 16:45, Robert Marko wrote:
> > HI,
> > Vinod can you maybe pick this?
>
> Sorry can't do.. this needs to go thru Bjorn..
>
> We are in merge window so it is too late for that.
> Bjorn can pick this for 5.9...
Hi, can this be picked up for 5.9?
Driver and DT bindings are already in 5.8

Thanks
>
> >
> > It would be great to have nodes in 5.8 along the driver
> >
> > Thank
> > Robert
> >
> > On Fri, May 29, 2020 at 11:36 AM Robert Marko <robert.marko@sartura.hr> wrote:
> > >
> > > On Mon, May 4, 2020 at 9:39 AM Vinod Koul <vkoul@kernel.org> wrote:
> > > >
> > > > On 03-05-20, 22:18, Robert Marko wrote:
> > > > > From: John Crispin <john@phrozen.org>
> > > > >
> > > > > Since we now have driver for the USB PHY, lets add the necessary nodes to DTSI.
> > > >
> > > > Reviewed-by: Vinod Koul <vkoul@kernel.org>
> > > >
> > > > Bjorn, I have picked the phy and dt binding, feel free to apply this one
> > > >
> > > > Thanks
> > > > --
> > > > ~Vinod
> > >
> > > Any chance of this landing into 5.7?
> > > Driver and bindings have been merged, but I don't see DT nodes queued.
> > >
> > > Regards,
> > > Robert
>
> --
> ~Vinod
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index bfa9ce4c6e69..ee45253361cb 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -604,5 +604,79 @@ 
 				reg = <4>;
 			};
 		};
+
+		usb3_ss_phy: ssphy@9a000 {
+			compatible = "qcom,usb-ss-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0x9a000 0x800>;
+			reg-names = "phy_base";
+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+			reset-names = "por_rst";
+			status = "disabled";
+		};
+
+		usb3_hs_phy: hsphy@a6000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa6000 0x40>;
+			reg-names = "phy_base";
+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb3@8af8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x8af8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
+				 <&gcc GCC_USB3_SLEEP_CLK>,
+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xf8000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+			};
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa8000 0x40>;
+			reg-names = "phy_base";
+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb2@60f8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x60f8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
+				 <&gcc GCC_USB2_SLEEP_CLK>,
+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@6000000 {
+				compatible = "snps,dwc3";
+				reg = <0x6000000 0xf8000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_hs_phy>;
+				phy-names = "usb2-phy";
+				dr_mode = "host";
+			};
+		};
 	};
 };