dt-bindings: convert spmi.txt to spmi.yaml

Convert the SPMI bus documentation to JSON/yaml.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---

Rob,

As promissed, this patch converts the spmi.txt generic bus bindings to
html.

 .../bindings/mfd/qcom,spmi-pmic.txt           |  2 +-
 .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  4 +-
 .../devicetree/bindings/spmi/spmi.txt         | 41 ------------
 .../devicetree/bindings/spmi/spmi.yaml        | 62 +++++++++++++++++++
 4 files changed, 65 insertions(+), 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt
 create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml

On Wed, 19 Aug 2020 17:20:06 +0200, Mauro Carvalho Chehab wrote:
> Convert the SPMI bus documentation to JSON/yaml.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> 
> Rob,
> 
> As promissed, this patch converts the spmi.txt generic bus bindings to
> html.
> 
>  .../bindings/mfd/qcom,spmi-pmic.txt           |  2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  4 +-
>  .../devicetree/bindings/spmi/spmi.txt         | 41 ------------
>  .../devicetree/bindings/spmi/spmi.yaml        | 62 +++++++++++++++++++
>  4 files changed, 65 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/spmi/spmi.example.dts:23.18-19 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/spmi/spmi.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1367: dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1347886

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

On Wed, Aug 19, 2020 at 05:20:06PM +0200, Mauro Carvalho Chehab wrote:
> Convert the SPMI bus documentation to JSON/yaml.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> 
> Rob,
> 
> As promissed, this patch converts the spmi.txt generic bus bindings to
> html.

Thanks!

> 
>  .../bindings/mfd/qcom,spmi-pmic.txt           |  2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  4 +-
>  .../devicetree/bindings/spmi/spmi.txt         | 41 ------------
>  .../devicetree/bindings/spmi/spmi.yaml        | 62 +++++++++++++++++++
>  4 files changed, 65 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index fffc8fde3302..79367a43b27d 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -37,7 +37,7 @@ Required properties:
>                     or generalized "qcom,spmi-pmic".
>  - reg:             Specifies the SPMI USID slave address for this device.
>                     For more information see:
> -                   Documentation/devicetree/bindings/spmi/spmi.txt
> +                   Documentation/devicetree/bindings/spmi/spmi.yaml
>  
>  Required properties for peripheral child nodes:
>  - compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> index e16b9b5afc70..ca645e21fe47 100644
> --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> @@ -7,8 +7,8 @@ devices to control a single SPMI master.
>  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
>  to slave devices.
>  
> -See spmi.txt for the generic SPMI controller binding requirements for child
> -nodes.
> +See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
> +controller binding requirements for child nodes.
>  
>  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
>  generic interrupt controller binding documentation.
> diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
> deleted file mode 100644
> index 4bb10d161a27..000000000000
> --- a/Documentation/devicetree/bindings/spmi/spmi.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -System Power Management Interface (SPMI) Controller
> -
> -This document defines a generic set of bindings for use by SPMI controllers.  A
> -controller is modelled in device tree as a node with zero or more child nodes,
> -each representing a unique slave on the bus.
> -
> -Required properties:
> -- #address-cells : must be set to 2
> -- #size-cells : must be set to 0
> -
> -Child nodes:
> -
> -An SPMI controller node can contain zero or more child nodes representing slave
> -devices on the bus.  Child 'reg' properties are specified as an address, type
> -pair.  The address must be in the range 0-15 (4 bits).  The type must be one of
> -SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
> -These are the identifiers "statically assigned by the system integrator", as
> -per the SPMI spec.
> -
> -Each child node must have one and only one 'reg' entry of type SPMI_USID.
> -
> -#include <dt-bindings/spmi/spmi.h>
> -
> -	spmi@.. {
> -		compatible = "...";
> -		reg = <...>;
> -
> -		#address-cells = <2>;
> -		#size-cells = <0>;
> -
> -		child@0 {
> -			compatible = "...";
> -			reg = <0 SPMI_USID>;
> -		};
> -
> -		child@7 {
> -			compatible = "...";
> -			reg = <7 SPMI_USID
> -			       3 SPMI_GSID>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
> new file mode 100644
> index 000000000000..8d72796b9bec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spmi/spmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: System Power Management Interface (SPMI) Controller
> +
> +maintainers:
> +  - Josh Cartwright <joshc@codeaurora.org>
> +
> +description: |
> +  The System Power Management (SPMI) controller is a 2-wire bus defined
> +  by the MIPI Alliance for power management control to be used on SoC designs.
> +
> +  SPMI controllers are modelled in device tree using a generic set of
> +  bindings defined here, plus any bus controller specific properties, if
> +  needed.
> +
> +  Each SPMI controller has zero or more child nodes (up to 16 ones), each
> +  one representing an unique slave at the bus.
> +
> +properties:
> +  $nodename:
> +    pattern: "spmi@[0-9a-f]+"

Just "spmi@.*" as we shouldn't assume unit-address details of the parent 
bus.

> +
> +  compatible:
> +    description: filled by the SPMI bus controller
> +
> +  reg:
> +    maxItems: 1

No need for 'reg' and 'compatible' here. Those will be covered by 
specific SPMI controller schemas. But you do need:

"#address-cells":
  const: 2

"#size-cells":
  const: 0

> +
> +patternProperties:
> +  "@([0-9]|1[0-5])$":

While buses define their own unit-address format, unit addresses are 
normally hex.

> +    description: up to 16 child PMIC nodes

       type: object

Need to also define 'reg' constraints as defined by the bus:

properties:
  reg:
    minItems: 1
    maxItems: 2  #??? Not sure about this. Is it 1 SPMI_USID and 1 \
SPMI_GSID entry at most?
    items:
      items:
        - minimum: 0
          maximum: 0xf
        - enum: [ 0, 1 ]

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/spmi/spmi.h>
> +
> +    spmi@.. {
> +      compatible = "...";
> +      reg = <...>;

Example has to build now. Just drop these 2 properties.

> +
> +      #address-cells = <2>;
> +      #size-cells = <0>;
> +
> +      child@0 {
> +        compatible = "...";
> +        reg = <0 SPMI_USID>;
> +      };
> +
> +      child@7 {
> +        compatible = "...";
> +        reg = <7 SPMI_USID
> +               3 SPMI_GSID>;
> +      };
> +    };
> -- 
> 2.26.2
> 
>