Message ID | 1601376452-31839-1-git-send-email-sanm@codeaurora.org |
---|---|
Headers | show |
Series | USB DWC3 host wake up support from system suspend | expand |
Hello! On 29.09.2020 13:47, Sandeep Maheswaram wrote: > Using pdc interrupts for USB instead of GIC interrupts to > support wake up in case xo shutdown. s/xo/of/? > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > Reviewed-by: Stephen Boyd <swboyd@chromium.org> [...] MBR, Sergei
On Tue, Sep 29, 2020 at 04:17:29PM +0530, Sandeep Maheswaram wrote: > Adding suspend quirk function for dwc3 host which will be called > during xhci suspend. > Setting hs_phy_flags, ss_phy_flags and phy mode during host suspend. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > drivers/usb/dwc3/host.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > > diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c > index e195176..7f316fa 100644 > --- a/drivers/usb/dwc3/host.c > +++ b/drivers/usb/dwc3/host.c > @@ -11,6 +11,13 @@ > #include <linux/platform_device.h> > > #include "core.h" > +#include "../host/xhci.h" > +#include "../host/xhci-plat.h" > +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd); > + > +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = { > + .suspend_quirk = xhci_dwc3_suspend_quirk, > +}; > > static int dwc3_host_get_irq(struct dwc3 *dwc) > { > @@ -115,6 +122,13 @@ int dwc3_host_init(struct dwc3 *dwc) > } > } > > + ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci, > + sizeof(struct xhci_plat_priv)); > + if (ret) { > + dev_err(dwc->dev, "failed to add data to xHCI\n"); > + goto err; > + } > + > ret = platform_device_add(xhci); > if (ret) { > dev_err(dwc->dev, "failed to register xHCI device\n"); > @@ -127,6 +141,41 @@ int dwc3_host_init(struct dwc3 *dwc) > return ret; > } > > +static void dwc3_set_phy_speed_flags(struct usb_hcd *hcd) The main thing this function does is setting the PHY mode (see the phy_set_mode() calls), please rename it to dwc3_set_phy_mode() to reflect this. > +{ > + > + int i, num_ports; > + u32 reg; > + struct device *dev = hcd->self.controller; > + struct dwc3 *dwc = dev_get_drvdata(dev->parent); > + struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd); > + > + dwc->hs_phy_flags = 0; What about 'dwc->ss_phy_flags'? I suggested in another patch to use a local variable instead, so you probably have to initialize it anyway or the compiler will be unhappy ;-) > + > + reg = readl(&xhci_hcd->cap_regs->hcs_params1); > + > + num_ports = HCS_MAX_PORTS(reg); > + for (i = 0; i < num_ports; i++) { > + reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04); > + if (reg & PORT_PE) { > + if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg)) > + dwc->hs_phy_flags |= PHY_MODE_USB_HOST_HS; > + else if (DEV_LOWSPEED(reg)) > + dwc->hs_phy_flags |= PHY_MODE_USB_HOST_LS; nit: add empty line to visually separate HS from SS > + if (DEV_SUPERSPEED(reg)) > + dwc->ss_phy_flags |= PHY_MODE_USB_HOST_SS; > + } > + } > + phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_flags); > + phy_set_mode(dwc->usb3_generic_phy, dwc->ss_phy_flags); Check return values and return any errors?
On Tue, Sep 29, 2020 at 04:17:30PM +0530, Sandeep Maheswaram wrote: > Configure interrupts based on hs_phy_flag to avoid triggering of > interrupts during system suspend and suspends successfully. > Set genpd active wakeup flag for usb gdsc if wakeup capable devices > are connected so that wake up happens without reenumeration. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > drivers/usb/dwc3/dwc3-qcom.c | 74 +++++++++++++++++++++++++++++++++++--------- > 1 file changed, 59 insertions(+), 15 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c > index c703d55..b6f36bd 100644 > --- a/drivers/usb/dwc3/dwc3-qcom.c > +++ b/drivers/usb/dwc3/dwc3-qcom.c > @@ -17,9 +17,11 @@ > #include <linux/of_platform.h> > #include <linux/platform_device.h> > #include <linux/phy/phy.h> > +#include <linux/pm_domain.h> > #include <linux/usb/of.h> > #include <linux/reset.h> > #include <linux/iopoll.h> > +#include <linux/usb/hcd.h> > > #include "core.h" > > @@ -293,19 +295,33 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom) > > static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) > { > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > + > if (qcom->hs_phy_irq) { > disable_irq_wake(qcom->hs_phy_irq); > disable_irq_nosync(qcom->hs_phy_irq); > } > > - if (qcom->dp_hs_phy_irq) { > - disable_irq_wake(qcom->dp_hs_phy_irq); > - disable_irq_nosync(qcom->dp_hs_phy_irq); > - } > + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) { > + if (qcom->dp_hs_phy_irq) { > + disable_irq_wake(qcom->dp_hs_phy_irq); > + disable_irq_nosync(qcom->dp_hs_phy_irq); > + } > + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) { > + if (qcom->dm_hs_phy_irq) { > + disable_irq_wake(qcom->dm_hs_phy_irq); > + disable_irq_nosync(qcom->dm_hs_phy_irq); > + } > + } else { > + if (qcom->dp_hs_phy_irq) { > + disable_irq_wake(qcom->dp_hs_phy_irq); > + disable_irq_nosync(qcom->dp_hs_phy_irq); > + } > > - if (qcom->dm_hs_phy_irq) { > - disable_irq_wake(qcom->dm_hs_phy_irq); > - disable_irq_nosync(qcom->dm_hs_phy_irq); > + if (qcom->dm_hs_phy_irq) { > + disable_irq_wake(qcom->dm_hs_phy_irq); > + disable_irq_nosync(qcom->dm_hs_phy_irq); > + } This function would benefit from a helper like this: static void dwc3_qcon_enable_wakeup_irq(int wake_irq) { if (wake_irq) { disable_irq_wake(wake_irq); disable_irq_nosync(wake_irq); } } > } > > if (qcom->ss_phy_irq) { > @@ -316,19 +332,33 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) > > static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) > { > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > + > if (qcom->hs_phy_irq) { > enable_irq(qcom->hs_phy_irq); > enable_irq_wake(qcom->hs_phy_irq); > } > > - if (qcom->dp_hs_phy_irq) { > - enable_irq(qcom->dp_hs_phy_irq); > - enable_irq_wake(qcom->dp_hs_phy_irq); > - } > + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) { > + if (qcom->dp_hs_phy_irq) { > + enable_irq(qcom->dp_hs_phy_irq); > + enable_irq_wake(qcom->dp_hs_phy_irq); > + } > + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) { > + if (qcom->dm_hs_phy_irq) { > + enable_irq(qcom->dm_hs_phy_irq); > + enable_irq_wake(qcom->dm_hs_phy_irq); > + } > + } else { > + if (qcom->dp_hs_phy_irq) { > + enable_irq(qcom->dp_hs_phy_irq); > + enable_irq_wake(qcom->dp_hs_phy_irq); > + } > > - if (qcom->dm_hs_phy_irq) { > - enable_irq(qcom->dm_hs_phy_irq); > - enable_irq_wake(qcom->dm_hs_phy_irq); > + if (qcom->dm_hs_phy_irq) { > + enable_irq(qcom->dm_hs_phy_irq); > + enable_irq_wake(qcom->dm_hs_phy_irq); > + } > } Same as for _disable(), a helper would make this function more digestable. > if (qcom->ss_phy_irq) { > @@ -341,6 +371,15 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) > { > u32 val; > int i, ret; > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > + struct usb_hcd *hcd; nit: remove extra blank > + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain); > + > + if (dwc->xhci) { > + hcd = platform_get_drvdata(dwc->xhci); > + if (usb_wakeup_enabled_descendants(hcd->self.root_hub)) > + genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP; > + } Do this after the check for 'qcom->is_suspended' below > > if (qcom->is_suspended) > return 0; > @@ -366,6 +405,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom) > { > int ret; > int i; > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain); > + > + if (dwc->xhci) > + genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP; ditto > > if (!qcom->is_suspended) > return 0; > @@ -764,7 +808,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) > if (ret) > goto interconnect_exit; > > - device_init_wakeup(&pdev->dev, 1); > + device_init_wakeup(&pdev->dev, of_property_read_bool(np, "wakeup-source")); > qcom->is_suspended = false; > pm_runtime_set_active(dev); > pm_runtime_enable(dev); >
Quoting Sergei Shtylyov (2020-09-29 04:41:19) > Hello! > > On 29.09.2020 13:47, Sandeep Maheswaram wrote: > > > Using pdc interrupts for USB instead of GIC interrupts to > > support wake up in case xo shutdown. > > s/xo/of/? No it is xo. If anything it could be capitalized because it's the pin name and usually stands for "crystal oscillator". > > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
On 01.10.2020 4:05, Stephen Boyd wrote: [...] >>> Using pdc interrupts for USB instead of GIC interrupts to >>> support wake up in case xo shutdown. >> >> s/xo/of/? > > No it is xo. If anything it could be capitalized because it's the > pin name and usually stands for "crystal oscillator". In this case, "of" is still needed. :-) >>> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> >>> Reviewed-by: Stephen Boyd <swboyd@chromium.org> MBR, Sergei