mbox series

[v2,0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw

Message ID 20200908165942.32368-1-grygorii.strashko@ti.com
Headers show
Series arm64: dts: ti: k3-j7200: add dma and mcu cpsw | expand

Message

Grygorii Strashko Sept. 8, 2020, 4:59 p.m. UTC 
Hi All,

arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
  with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking

This series depends on:
 - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
   from: Lokesh Vutla <lokeshvutla@ti.com>

 - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
   from: Peter Ujfalusi <peter.ujfalusi@ti.com>

 - [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]
   from: Peter Ujfalusi <peter.ujfalusi@ti.com>


[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/
[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/

Changes in v2:
 - fixed DT build warnings (Nishanth Menon)

v1: https://lore.kernel.org/patchwork/cover/1301067/

Grygorii Strashko (3):
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
    and phy defs

Peter Ujfalusi (1):
  arm64: dts: ti: k3-j7200: add DMA support

 .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
 3 files changed, 236 insertions(+)

-- 
2.17.1

Comments

Kishon Vijay Abraham I Sept. 10, 2020, 7:38 a.m. UTC | #1 
On 08/09/20 10:29 pm, Grygorii Strashko wrote:
> Hi All,

> 

> arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

> 

> This series adds DT nodes for TI J7200 SoC

> - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible

>   with J721E Soc, to enable DMA support

> - MCU CPSW2g DT nodes to enable networking


https://pastebin.ubuntu.com/p/FPVggcdQ6T/

Tested-by: Kishon Vijay Abraham I <kishon@ti.com>


Thanks
Kishon

> 

> This series depends on:

>  - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]

>    from: Lokesh Vutla <lokeshvutla@ti.com>

>  - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]

>    from: Peter Ujfalusi <peter.ujfalusi@ti.com>

>  - [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]

>    from: Peter Ujfalusi <peter.ujfalusi@ti.com>

> 

> [1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6

> [2] https://lore.kernel.org/patchwork/patch/1283230/

> [3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/

> 

> Changes in v2:

>  - fixed DT build warnings (Nishanth Menon)

> 

> v1: https://lore.kernel.org/patchwork/cover/1301067/

> 

> Grygorii Strashko (3):

>   arm64: dts: ti: k3-j7200-main: add main navss cpts node

>   arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node

>   arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux

>     and phy defs

> 

> Peter Ujfalusi (1):

>   arm64: dts: ti: k3-j7200: add DMA support

> 

>  .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++

>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++

>  .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++

>  3 files changed, 236 insertions(+)

>