diff mbox series

[2/2] ath11k: Add peer max mpdu parameter in peer assoc command

Message ID 1588611900-21185-2-git-send-email-tamizhr@codeaurora.org
State New
Headers show
Series None | expand

Commit Message

Tamizh chelvam May 4, 2020, 5:05 p.m. UTC 
Add peer max mpdu length configuration support in peer_assoc_he
parameters. Noticed low throughput for the STA which
supports HE, HT and not VHT in MU-MIMO case without this
configuration

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Kalle Valo Sept. 9, 2020, 6:50 a.m. UTC | #1 
Tamizh Chelvam <tamizhr@codeaurora.org> wrote:

> Add peer max mpdu length configuration support in peer_assoc_he

> parameters. Noticed low throughput for the STA which

> supports HE, HT and not VHT in MU-MIMO case without this

> configuration

> 

> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>

> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>


Patch applied to ath-next branch of ath.git, thanks.

af6d39db1b04 ath11k: Add peer max mpdu parameter in peer assoc command

-- 
https://patchwork.kernel.org/patch/11526769/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f33c6d7..88e533c 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1161,6 +1161,7 @@  static void ath11k_peer_assoc_h_he(struct ath11k *ar,
 				   struct peer_assoc_params *arg)
 {
 	const struct ieee80211_sta_he_cap *he_cap = &sta->he_cap;
+	u8  ampdu_factor;
 	u16 v;
 
 	if (!he_cap->has_he)
@@ -1178,6 +1179,30 @@  static void ath11k_peer_assoc_h_he(struct ath11k *ar,
 	/* the top most byte is used to indicate BSS color info */
 	arg->peer_he_ops &= 0xffffff;
 
+	/* As per section 26.6.1 11ax Draft5.0, if the Max AMPDU Exponent Extension
+	 * in HE cap is zero, use the arg->peer_max_mpdu as calculated while parsing
+	 * VHT caps(if VHT caps is present) or HT caps (if VHT caps is not present).
+	 *
+	 * For non-zero value of Max AMPDU Extponent Extension in HE MAC caps,
+	 * if a HE STA sends VHT cap and HE cap IE in assoc request then, use
+	 * MAX_AMPDU_LEN_FACTOR as 20 to calculate max_ampdu length.
+	 * If a HE STA that does not send VHT cap, but HE and HT cap in assoc
+	 * request, then use MAX_AMPDU_LEN_FACTOR as 16 to calculate max_ampdu
+	 * length.
+	 */
+	ampdu_factor = (he_cap->he_cap_elem.mac_cap_info[3] &
+			IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) >>
+			IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_SHIFT;
+
+	if (ampdu_factor) {
+		if (sta->vht_cap.vht_supported)
+			arg->peer_max_mpdu = (1 << (IEEE80211_HE_VHT_MAX_AMPDU_FACTOR +
+						    ampdu_factor)) - 1;
+		else if (sta->ht_cap.ht_supported)
+			arg->peer_max_mpdu = (1 << (IEEE80211_HE_HT_MAX_AMPDU_FACTOR +
+						    ampdu_factor)) - 1;
+	}
+
 	if (he_cap->he_cap_elem.phy_cap_info[6] &
 	    IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
 		int bit = 7;