| Message ID | 267a81e550a0b5d479c82b5908e2a2caa4c9c874.1597061474.git.guillaume.tucker@collabora.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/4] ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val | expand |
Hi Krzysztof, Russell, On 10/08/2020 13:22, Guillaume Tucker wrote: > The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable > sequence. There is no need to set it in the default register value, > this was done before support for it was implemented in the code. It > is not set in the hardware initial value either. > > Clean this up by removing this flag from the default l2c_aux_val, and > add it to the l2c_aux_mask to print an alert message if it was already > set before the kernel initialisation. > > Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> > --- > > Notes: > v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN > > arch/arm/mach-exynos/exynos.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) I believe this v2 series has addressed all previous comments and you were waiting for the 5.9 merge window to end. The patches all still apply cleanly on v5.9-rc3. Do you want me to resend the series anyway or is there anything else needed at this point? Maybe one thing that wasn't completely clear in v1 was whether patch 2/4 was the right approach. I've explained the reason behind it but didn't get a final reply from Russell[1]. Best wishes, Guillaume [1] https://lore.kernel.org/lkml/46fa1159-fcd6-b528-b8e8-2fba048236b2@collabora.com/ > diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c > index 36c37444485a..a96f3353a0c1 100644 > --- a/arch/arm/mach-exynos/exynos.c > +++ b/arch/arm/mach-exynos/exynos.c > @@ -193,8 +193,8 @@ static void __init exynos_dt_fixup(void) > } > > DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)") > - .l2c_aux_val = 0x3c400000, > - .l2c_aux_mask = 0xc20fffff, > + .l2c_aux_val = 0x38400000, > + .l2c_aux_mask = 0xc60fffff, > .smp = smp_ops(exynos_smp_ops), > .map_io = exynos_init_io, > .init_early = exynos_firmware_init, >
On Tue, 1 Sep 2020 at 15:34, Guillaume Tucker <guillaume.tucker@collabora.com> wrote: > > Hi Krzysztof, Russell, > > On 10/08/2020 13:22, Guillaume Tucker wrote: > > The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable > > sequence. There is no need to set it in the default register value, > > this was done before support for it was implemented in the code. It > > is not set in the hardware initial value either. > > > > Clean this up by removing this flag from the default l2c_aux_val, and > > add it to the l2c_aux_mask to print an alert message if it was already > > set before the kernel initialisation. > > > > Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> > > --- > > > > Notes: > > v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN > > > > arch/arm/mach-exynos/exynos.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > I believe this v2 series has addressed all previous comments and > you were waiting for the 5.9 merge window to end. The patches > all still apply cleanly on v5.9-rc3. Do you want me to resend > the series anyway or is there anything else needed at this point? > > Maybe one thing that wasn't completely clear in v1 was whether > patch 2/4 was the right approach. I've explained the reason > behind it but didn't get a final reply from Russell[1]. I am sorry, my bad. I already applied this one and 3/4 (dts). Apparently I forgot to reply with confirmation and Patchwork did not notify you for some reason. Patch 2/4 does not look like one for me so I would need ack from Russell to take. Did you submit it to the ARM patches queue? Patch 4/4 will wait for v5.10-rc1 as it depends on 1/4 and it is DTS patch. Best regards, Krzysztof
On Tue, 1 Sep 2020 at 15:45, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Tue, 1 Sep 2020 at 15:34, Guillaume Tucker > <guillaume.tucker@collabora.com> wrote: > > > > Hi Krzysztof, Russell, > > > > On 10/08/2020 13:22, Guillaume Tucker wrote: > > > The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable > > > sequence. There is no need to set it in the default register value, > > > this was done before support for it was implemented in the code. It > > > is not set in the hardware initial value either. > > > > > > Clean this up by removing this flag from the default l2c_aux_val, and > > > add it to the l2c_aux_mask to print an alert message if it was already > > > set before the kernel initialisation. > > > > > > Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> > > > --- > > > > > > Notes: > > > v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN > > > > > > arch/arm/mach-exynos/exynos.c | 4 ++-- > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > I believe this v2 series has addressed all previous comments and > > you were waiting for the 5.9 merge window to end. The patches > > all still apply cleanly on v5.9-rc3. Do you want me to resend > > the series anyway or is there anything else needed at this point? > > > > Maybe one thing that wasn't completely clear in v1 was whether > > patch 2/4 was the right approach. I've explained the reason > > behind it but didn't get a final reply from Russell[1]. > > I am sorry, my bad. I already applied this one and 3/4 (dts). > Apparently I forgot to reply with confirmation and Patchwork did not > notify you for some reason. > > Patch 2/4 does not look like one for me so I would need ack from > Russell to take. Did you submit it to the ARM patches queue? > Patch 4/4 will wait for v5.10-rc1 as it depends on 1/4 and it is DTS patch. Correct: Patch 4/4 will wait for v5.10 because it depends on the DTS patch. Best regards, Krzysztof
On 01/09/2020 14:51, Krzysztof Kozlowski wrote: > On Tue, 1 Sep 2020 at 15:45, Krzysztof Kozlowski <krzk@kernel.org> wrote: >> >> On Tue, 1 Sep 2020 at 15:34, Guillaume Tucker >> <guillaume.tucker@collabora.com> wrote: >>> >>> Hi Krzysztof, Russell, >>> >>> On 10/08/2020 13:22, Guillaume Tucker wrote: >>>> The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable >>>> sequence. There is no need to set it in the default register value, >>>> this was done before support for it was implemented in the code. It >>>> is not set in the hardware initial value either. >>>> >>>> Clean this up by removing this flag from the default l2c_aux_val, and >>>> add it to the l2c_aux_mask to print an alert message if it was already >>>> set before the kernel initialisation. >>>> >>>> Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> >>>> --- >>>> >>>> Notes: >>>> v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN >>>> >>>> arch/arm/mach-exynos/exynos.c | 4 ++-- >>>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> I believe this v2 series has addressed all previous comments and >>> you were waiting for the 5.9 merge window to end. The patches >>> all still apply cleanly on v5.9-rc3. Do you want me to resend >>> the series anyway or is there anything else needed at this point? >>> >>> Maybe one thing that wasn't completely clear in v1 was whether >>> patch 2/4 was the right approach. I've explained the reason >>> behind it but didn't get a final reply from Russell[1]. >> >> I am sorry, my bad. I already applied this one and 3/4 (dts). >> Apparently I forgot to reply with confirmation and Patchwork did not >> notify you for some reason. No problem, I see them in linux-next now. Thanks! >> Patch 2/4 does not look like one for me so I would need ack from >> Russell to take. Did you submit it to the ARM patches queue? I've CC-ed linux-arm-kernel@lists.infradead.org on the whole series. Did you mean anything else by the ARM patches queue? >> Patch 4/4 will wait for v5.10-rc1 as it depends on 1/4 and it is DTS patch. > > Correct: Patch 4/4 will wait for v5.10 because it depends on the DTS patch. Sure, in fact patch 4/4 depends on the DTS one (3/4) and also on the l2c fix (2/4) as otherwise prefetch would actually not be enabled. So it sounds like both remaining ones 2/4 and 4/4 are actually now pending Russell's ack. Best wishes, Guillaume [1] https://lore.kernel.org/lkml/46fa1159-fcd6-b528-b8e8-2fba048236b2@collabora.com/
On Tue, 1 Sep 2020 at 16:42, Guillaume Tucker <guillaume.tucker@collabora.com> wrote: > > On 01/09/2020 14:51, Krzysztof Kozlowski wrote: > > On Tue, 1 Sep 2020 at 15:45, Krzysztof Kozlowski <krzk@kernel.org> wrote: > >> > >> On Tue, 1 Sep 2020 at 15:34, Guillaume Tucker > >> <guillaume.tucker@collabora.com> wrote: > >>> > >>> Hi Krzysztof, Russell, > >>> > >>> On 10/08/2020 13:22, Guillaume Tucker wrote: > >>>> The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable > >>>> sequence. There is no need to set it in the default register value, > >>>> this was done before support for it was implemented in the code. It > >>>> is not set in the hardware initial value either. > >>>> > >>>> Clean this up by removing this flag from the default l2c_aux_val, and > >>>> add it to the l2c_aux_mask to print an alert message if it was already > >>>> set before the kernel initialisation. > >>>> > >>>> Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> > >>>> --- > >>>> > >>>> Notes: > >>>> v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN > >>>> > >>>> arch/arm/mach-exynos/exynos.c | 4 ++-- > >>>> 1 file changed, 2 insertions(+), 2 deletions(-) > >>> > >>> I believe this v2 series has addressed all previous comments and > >>> you were waiting for the 5.9 merge window to end. The patches > >>> all still apply cleanly on v5.9-rc3. Do you want me to resend > >>> the series anyway or is there anything else needed at this point? > >>> > >>> Maybe one thing that wasn't completely clear in v1 was whether > >>> patch 2/4 was the right approach. I've explained the reason > >>> behind it but didn't get a final reply from Russell[1]. > >> > >> I am sorry, my bad. I already applied this one and 3/4 (dts). > >> Apparently I forgot to reply with confirmation and Patchwork did not > >> notify you for some reason. > > No problem, I see them in linux-next now. Thanks! > > >> Patch 2/4 does not look like one for me so I would need ack from > >> Russell to take. Did you submit it to the ARM patches queue? > > I've CC-ed linux-arm-kernel@lists.infradead.org on the whole > series. Did you mean anything else by the ARM patches queue? Unless anything changed, so far all ARM-core related patches had to be submitted to Russell's system. I didn't submit anything for 3 years so maybe something changed... https://www.arm.linux.org.uk/developer/patches/ Best regards, Krzysztof
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 36c37444485a..a96f3353a0c1 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -193,8 +193,8 @@ static void __init exynos_dt_fixup(void) } DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)") - .l2c_aux_val = 0x3c400000, - .l2c_aux_mask = 0xc20fffff, + .l2c_aux_val = 0x38400000, + .l2c_aux_mask = 0xc60fffff, .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init,
The L310_AUX_CTRL_NS_LOCKDOWN flag is set during the L2C enable sequence. There is no need to set it in the default register value, this was done before support for it was implemented in the code. It is not set in the hardware initial value either. Clean this up by removing this flag from the default l2c_aux_val, and add it to the l2c_aux_mask to print an alert message if it was already set before the kernel initialisation. Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> --- Notes: v2: fix flag name L310_AUX_CTRL_NS_LOCKDOWN arch/arm/mach-exynos/exynos.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.20.1