| Message ID | 20200519145111.21515-2-trini@konsulko.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/7] amlogic: Remove ARCH= references from documentation | expand |
Hi On Tue, May 19, 2020 at 8:21 PM Tom Rini <trini at konsulko.com> wrote: > > When building U-Boot we select the architecture via Kconfig and not ARCH > being passed in via the environment or make cmdline. > > Cc: Adam Ford <aford173 at gmail.com> > Cc: Vanessa Maegima <vanessa.maegima at nxp.com> > Cc: Otavio Salvador <otavio at ossystems.com.br> > Cc: Igor Opaniuk <igor.opaniuk at toradex.com> > Cc: Amit Singh Tomar <amittomer25 at gmail.com> > Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > Signed-off-by: Tom Rini <trini at konsulko.com> > --- > As an aside, the README files that haven't already been converted to rST > should be converted rST and moved to doc/board/ and the MAINTAINERS file > updated to include the new documentation file too. Thanks! > --- > board/beacon/imx8mm/README | 2 +- > board/logicpd/imx6/README | 2 +- > board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- > doc/board/actions/cubieboard7.rst | 2 +- It is clubbed with imx platform but cubieboard7.rst is for Actions platform which is completely different from imx. Thanks -Amit
On Tue, May 19, 2020 at 08:41:45PM +0530, Amit Tomer wrote: > Hi > > On Tue, May 19, 2020 at 8:21 PM Tom Rini <trini at konsulko.com> wrote: > > > > When building U-Boot we select the architecture via Kconfig and not ARCH > > being passed in via the environment or make cmdline. > > > > Cc: Adam Ford <aford173 at gmail.com> > > Cc: Vanessa Maegima <vanessa.maegima at nxp.com> > > Cc: Otavio Salvador <otavio at ossystems.com.br> > > Cc: Igor Opaniuk <igor.opaniuk at toradex.com> > > Cc: Amit Singh Tomar <amittomer25 at gmail.com> > > Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > > Signed-off-by: Tom Rini <trini at konsulko.com> > > --- > > As an aside, the README files that haven't already been converted to rST > > should be converted rST and moved to doc/board/ and the MAINTAINERS file > > updated to include the new documentation file too. Thanks! > > --- > > board/beacon/imx8mm/README | 2 +- > > board/logicpd/imx6/README | 2 +- > > board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- > > doc/board/actions/cubieboard7.rst | 2 +- > > It is clubbed with imx platform but cubieboard7.rst is for Actions platform > which is completely different from imx. Whoops, gotta update my mental mapping, sorry.
diff --git a/board/beacon/imx8mm/README b/board/beacon/imx8mm/README index 4223fbd15dd6..dce176fa0b23 100644 --- a/board/beacon/imx8mm/README +++ b/board/beacon/imx8mm/README @@ -26,7 +26,7 @@ $ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mm_beacon_defconfig -$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 +$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 Burn U-Boot to microSD Card =========================== diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README index 26d053a32c3b..19f79c5734bc 100644 --- a/board/logicpd/imx6/README +++ b/board/logicpd/imx6/README @@ -17,7 +17,7 @@ Building U-Boot for Logic PD Development Kit To build U-Boot for the Dual and Quad variants: make imx6q_logic_defconfig - make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- + make u-boot.imx CROSS_COMPILE=arm-linux- Flashing U-Boot into the SD card diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 index 40324ffe5f34..1b346093b88d 100644 --- a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 +++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 @@ -4,7 +4,7 @@ The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure world in this case. - Build u-boot - Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm + Set environment variable of CROSS_COMPILE for your toolchain $ make pico-imx7d_bl33_defconfig $ make all diff --git a/doc/board/actions/cubieboard7.rst b/doc/board/actions/cubieboard7.rst index e01d2d0370a1..74f2b12e41fe 100644 --- a/doc/board/actions/cubieboard7.rst +++ b/doc/board/actions/cubieboard7.rst @@ -102,7 +102,7 @@ Building U-BOOT proper image $ make clean $ export CROSS_COMPILE=aarch64-linux-gnu- - $ make ARCH=arm cubieboard7_defconfig + $ make cubieboard7_defconfig $ make u-boot-dtb.img -j16 u-boot-dtb.img can now be flashed to debian image partition mounted on host machine. diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst index 6fb952666661..a30e721379ee 100644 --- a/doc/board/toradex/colibri_imx7.rst +++ b/doc/board/toradex/colibri_imx7.rst @@ -18,7 +18,6 @@ Build U-Boot .. code-block:: bash $ export CROSS_COMPILE=arm-linux-gnueabi- - $ export ARCH=arm $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig $ make
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <aford173 at gmail.com> Cc: Vanessa Maegima <vanessa.maegima at nxp.com> Cc: Otavio Salvador <otavio at ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk at toradex.com> Cc: Amit Singh Tomar <amittomer25 at gmail.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> Signed-off-by: Tom Rini <trini at konsulko.com> --- As an aside, the README files that haven't already been converted to rST should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks! --- board/beacon/imx8mm/README | 2 +- board/logicpd/imx6/README | 2 +- board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- doc/board/actions/cubieboard7.rst | 2 +- doc/board/toradex/colibri_imx7.rst | 1 - 5 files changed, 4 insertions(+), 5 deletions(-)