| Message ID | 1582715808-24911-1-git-send-email-meenakshi.aggarwal@nxp.com |
|---|---|
| State | Accepted |
| Commit | 224899d273e1426cc18be317744be2c03798c41f |
| Headers | show |
| Series | lx2160a : Remove default VID setting | expand |
>-----Original Message----- >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Meenakshi >Aggarwal >Sent: Wednesday, February 26, 2020 4:47 PM >To: u-boot at lists.denx.de; Priyanka Jain <priyanka.jain at nxp.com> >Cc: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com> >Subject: [PATCH] lx2160a : Remove default VID setting > >Set VID to 800 mV for Rev1 and set VID as per switch settings for Rev2. > >Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com> >--- Applied to u-boot-fsl-qoriq. Waiting upstream Thanks Priyanka
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 3deb76b..ba1cac2 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -297,7 +297,14 @@ int i2c_multiplexer_select_vid_channel(u8 channel) int init_func_vid(void) { - if (adjust_vdd(0) < 0) + int set_vid; + + if (IS_SVR_REV(get_svr(), 1, 0)) + set_vid = adjust_vdd(800); + else + set_vid = adjust_vdd(0); + + if (set_vid < 0) printf("core voltage not adjusted\n"); return 0; diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index 56a50d3..ddc76bd 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -127,7 +127,6 @@ u8 qixis_esdhc_detect_quirk(void); /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS \ - "lx2160aqds_vdd_mv=800\0" \ "boot_scripts=lx2160aqds_boot.scr\0" \ "boot_script_hdr=hdr_lx2160aqds_bs.out\0" \ "BOARD=lx2160aqds\0" \ diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 5b530f0..e86102a 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -99,7 +99,6 @@ EXTRA_ENV_SETTINGS \ "boot_scripts=lx2160ardb_boot.scr\0" \ "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \ - "lx2160ardb_vdd_mv=800\0" \ "BOARD=lx2160ardb\0" \ "xspi_bootcmd=echo Trying load from flexspi..;" \ "sf probe 0:0 && sf read $load_addr " \
Set VID to 800 mV for Rev1 and set VID as per switch settings for Rev2. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com> --- board/freescale/lx2160a/lx2160a.c | 9 ++++++++- include/configs/lx2160aqds.h | 1 - include/configs/lx2160ardb.h | 1 - 3 files changed, 8 insertions(+), 3 deletions(-)