| Message ID | 1584698111-19384-1-git-send-email-philippe.reynes@softathome.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] cmd: ubi: add a command to rename volume | expand |
Hi Philippe, On Fri, 20 Mar 2020 at 03:55, Philippe Reynes <philippe.reynes at softathome.com> wrote: > > This commit add the command ubi rename to rename an ubi volume. adds > The format of the command is: ubi rename <oldname> <newname>. > To enable this command, the option CMD_UBI_RENAME must be selected. > > Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com> > --- > cmd/Kconfig | 8 ++++++++ > cmd/ubi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 51 insertions(+) > > Changelog: > v2: > - added an option CMD_UBI_RENAME (feedback from Wolfgang) > > diff --git a/cmd/Kconfig b/cmd/Kconfig > index 6403bc4..1564694 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -2172,6 +2172,14 @@ config CMD_UBI > It is also strongly encouraged to also enable CONFIG_MTD to get full > partition support. > > +config CMD_UBI_RENAME > + bool "Enable rename" > + depends on CMD_UBI > + default n > + help > + Enable a "ubi" command to rename ubi volume: > + ubi rename <oldname> <newname> > + > config CMD_UBIFS > tristate "Enable UBIFS - Unsorted block images filesystem commands" > depends on CMD_UBI > diff --git a/cmd/ubi.c b/cmd/ubi.c > index cecf251..4885661 100644 > --- a/cmd/ubi.c > +++ b/cmd/ubi.c > @@ -251,6 +251,41 @@ out_err: > return err; > } > > +#ifdef CONFIG_CMD_UBI_RENAME > +static int ubi_rename_vol(char *oldname, char *newname) > +{ > + struct ubi_volume *vol; > + struct ubi_rename_entry rename; > + struct ubi_volume_desc desc; > + struct list_head list; > + > + vol = ubi_find_volume(oldname); > + if (!vol) { > + printf("%s: volume %s doesn't exist\n", __func__, oldname); > + return ENODEV; > + } > + > + printf("Rename UBI volume %s to %s\n", oldname, newname); > + > + if (ubi->ro_mode) { > + printf("%s: ubi device is in read-only mode\n", __func__); > + return EROFS; > + } > + > + rename.new_name_len = strlen(newname); > + strcpy(rename.new_name, newname); > + rename.remove = 0; > + desc.vol = vol; > + desc.mode = 0; > + rename.desc = &desc; > + INIT_LIST_HEAD(&rename.list); > + INIT_LIST_HEAD(&list); > + list_add(&rename.list, &list); > + > + return ubi_rename_volumes(ubi, &list); > +} > +#endif /* CONFIG_CMD_UBI_RENAME */ > + > static int ubi_volume_continue_write(char *volume, void *buf, size_t size) > { > int err = 1; > @@ -604,6 +639,11 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > return ubi_remove_vol(argv[2]); > } > > +#ifdef CONFIG_CMD_UBI_RENAME Can you use IS_ENABLED(CONFIG_...) and drop the #ifdef way above? > + if (strncmp(argv[1], "rename", 6) == 0) > + return ubi_rename_vol(argv[2], argv[3]); > +#endif > + [..] Regards, Simon
Hi Simon, > Hi Philippe, > > On Fri, 20 Mar 2020 at 03:55, Philippe Reynes > <philippe.reynes at softathome.com> wrote: >> >> This commit add the command ubi rename to rename an ubi volume. > > adds > >> The format of the command is: ubi rename <oldname> <newname>. >> To enable this command, the option CMD_UBI_RENAME must be selected. >> >> Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com> >> --- >> cmd/Kconfig | 8 ++++++++ >> cmd/ubi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ >> 2 files changed, 51 insertions(+) >> >> Changelog: >> v2: >> - added an option CMD_UBI_RENAME (feedback from Wolfgang) >> >> diff --git a/cmd/Kconfig b/cmd/Kconfig >> index 6403bc4..1564694 100644 >> --- a/cmd/Kconfig >> +++ b/cmd/Kconfig >> @@ -2172,6 +2172,14 @@ config CMD_UBI >> It is also strongly encouraged to also enable CONFIG_MTD to get full >> partition support. >> >> +config CMD_UBI_RENAME >> + bool "Enable rename" >> + depends on CMD_UBI >> + default n >> + help >> + Enable a "ubi" command to rename ubi volume: >> + ubi rename <oldname> <newname> >> + >> config CMD_UBIFS >> tristate "Enable UBIFS - Unsorted block images filesystem commands" >> depends on CMD_UBI >> diff --git a/cmd/ubi.c b/cmd/ubi.c >> index cecf251..4885661 100644 >> --- a/cmd/ubi.c >> +++ b/cmd/ubi.c >> @@ -251,6 +251,41 @@ out_err: >> return err; >> } >> >> +#ifdef CONFIG_CMD_UBI_RENAME >> +static int ubi_rename_vol(char *oldname, char *newname) >> +{ >> + struct ubi_volume *vol; >> + struct ubi_rename_entry rename; >> + struct ubi_volume_desc desc; >> + struct list_head list; >> + >> + vol = ubi_find_volume(oldname); >> + if (!vol) { >> + printf("%s: volume %s doesn't exist\n", __func__, oldname); >> + return ENODEV; >> + } >> + >> + printf("Rename UBI volume %s to %s\n", oldname, newname); >> + >> + if (ubi->ro_mode) { >> + printf("%s: ubi device is in read-only mode\n", __func__); >> + return EROFS; >> + } >> + >> + rename.new_name_len = strlen(newname); >> + strcpy(rename.new_name, newname); >> + rename.remove = 0; >> + desc.vol = vol; >> + desc.mode = 0; >> + rename.desc = &desc; >> + INIT_LIST_HEAD(&rename.list); >> + INIT_LIST_HEAD(&list); >> + list_add(&rename.list, &list); >> + >> + return ubi_rename_volumes(ubi, &list); >> +} >> +#endif /* CONFIG_CMD_UBI_RENAME */ >> + >> static int ubi_volume_continue_write(char *volume, void *buf, size_t size) >> { >> int err = 1; >> @@ -604,6 +639,11 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, >> char * const argv[]) >> return ubi_remove_vol(argv[2]); >> } >> >> +#ifdef CONFIG_CMD_UBI_RENAME > > Can you use IS_ENABLED(CONFIG_...) and drop the #ifdef way above? I've sent a v3 where I use IS_ENABLED instead of #ifdef. But I've kept a #if IS_ENABLED(...) around the function ubi_rename_vol. Otherwise if this option is not enabled, there is a warning when building : CC cmd/ubi.o cmd/ubi.c:254:12: warning: 'ubi_rename_vol' defined but not used [-Wunused-function] static int ubi_rename_vol(char *oldname, char *newname) ^~~~~~~~~~~~~~ >> + if (strncmp(argv[1], "rename", 6) == 0) >> + return ubi_rename_vol(argv[2], argv[3]); >> +#endif >> + > [..] > > Regards, > Simon Regards, Philippe
On 23/03/2020 18.16, Philippe REYNES wrote: >>> +#ifdef CONFIG_CMD_UBI_RENAME >> >> Can you use IS_ENABLED(CONFIG_...) and drop the #ifdef way above? > > I've sent a v3 where I use IS_ENABLED instead of #ifdef. > But I've kept a #if IS_ENABLED(...) around the function ubi_rename_vol. > Otherwise if this option is not enabled, there is a warning when building : > > CC cmd/ubi.o > cmd/ubi.c:254:12: warning: 'ubi_rename_vol' defined but not used [-Wunused-function] > static int ubi_rename_vol(char *oldname, char *newname) > ^~~~~~~~~~~~~~ Use C if (IS_ENABLED(CONFIG_...) && !strcmp(cmd, "rename")) not cpp #if IS_ENABLED(CONFIG_...) if (!strcmp(cmd, "rename")) That way the compiler sees ubi_rename_vol is used, but also knows that it is dead code that can be eliminated. Less ifdeffery (none, actually), and the code in ubi_rename_vol gets compile coverage regardless of configuration. Rasmus
Hi Rasmus, > On 23/03/2020 18.16, Philippe REYNES wrote: > >>>> +#ifdef CONFIG_CMD_UBI_RENAME >>> >>> Can you use IS_ENABLED(CONFIG_...) and drop the #ifdef way above? >> >> I've sent a v3 where I use IS_ENABLED instead of #ifdef. >> But I've kept a #if IS_ENABLED(...) around the function ubi_rename_vol. >> Otherwise if this option is not enabled, there is a warning when building : >> >> CC cmd/ubi.o >> cmd/ubi.c:254:12: warning: 'ubi_rename_vol' defined but not used >> [-Wunused-function] >> static int ubi_rename_vol(char *oldname, char *newname) >> ^~~~~~~~~~~~~~ > > Use C > > if (IS_ENABLED(CONFIG_...) && !strcmp(cmd, "rename")) > > not cpp > > #if IS_ENABLED(CONFIG_...) > if (!strcmp(cmd, "rename")) > > That way the compiler sees ubi_rename_vol is used, but also knows that > it is dead code that can be eliminated. Less ifdeffery (none, actually), > and the code in ubi_rename_vol gets compile coverage regardless of > configuration. Thanks a lot for this explanation. I have sent a v4. And it works as expected, without the #if ... before the function ubi_rename_vol, there isn't a warning if ubi rename is not enabled in the config. > Rasmus Regards, Philippe
diff --git a/cmd/Kconfig b/cmd/Kconfig index 6403bc4..1564694 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -2172,6 +2172,14 @@ config CMD_UBI It is also strongly encouraged to also enable CONFIG_MTD to get full partition support. +config CMD_UBI_RENAME + bool "Enable rename" + depends on CMD_UBI + default n + help + Enable a "ubi" command to rename ubi volume: + ubi rename <oldname> <newname> + config CMD_UBIFS tristate "Enable UBIFS - Unsorted block images filesystem commands" depends on CMD_UBI diff --git a/cmd/ubi.c b/cmd/ubi.c index cecf251..4885661 100644 --- a/cmd/ubi.c +++ b/cmd/ubi.c @@ -251,6 +251,41 @@ out_err: return err; } +#ifdef CONFIG_CMD_UBI_RENAME +static int ubi_rename_vol(char *oldname, char *newname) +{ + struct ubi_volume *vol; + struct ubi_rename_entry rename; + struct ubi_volume_desc desc; + struct list_head list; + + vol = ubi_find_volume(oldname); + if (!vol) { + printf("%s: volume %s doesn't exist\n", __func__, oldname); + return ENODEV; + } + + printf("Rename UBI volume %s to %s\n", oldname, newname); + + if (ubi->ro_mode) { + printf("%s: ubi device is in read-only mode\n", __func__); + return EROFS; + } + + rename.new_name_len = strlen(newname); + strcpy(rename.new_name, newname); + rename.remove = 0; + desc.vol = vol; + desc.mode = 0; + rename.desc = &desc; + INIT_LIST_HEAD(&rename.list); + INIT_LIST_HEAD(&list); + list_add(&rename.list, &list); + + return ubi_rename_volumes(ubi, &list); +} +#endif /* CONFIG_CMD_UBI_RENAME */ + static int ubi_volume_continue_write(char *volume, void *buf, size_t size) { int err = 1; @@ -604,6 +639,11 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return ubi_remove_vol(argv[2]); } +#ifdef CONFIG_CMD_UBI_RENAME + if (strncmp(argv[1], "rename", 6) == 0) + return ubi_rename_vol(argv[2], argv[3]); +#endif + if (strncmp(argv[1], "skipcheck", 9) == 0) { /* E.g., change skip_check flag */ if (argc == 4) { @@ -692,6 +732,9 @@ U_BOOT_CMD( " - Read volume to address with size\n" "ubi remove[vol] volume" " - Remove volume\n" +#ifdef CONFIG_CMD_UBI_RENAME + "ubi rename oldname newname\n" +#endif "ubi skipcheck volume on/off - Set or clear skip_check flag in volume header\n" "[Legends]\n" " volume: character name\n"
This commit add the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com> --- cmd/Kconfig | 8 ++++++++ cmd/ubi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) Changelog: v2: - added an option CMD_UBI_RENAME (feedback from Wolfgang)