diff mbox series

video: check hardware version of DSI

Message ID 20200624084359.17949-1-yannick.fertre@st.com
State Accepted
Commit 670eda329329d591d276b02c8918e7918aaedde7
Headers show
Series video: check hardware version of DSI | expand

Commit Message

Yannick Fertre June 24, 2020, 8:43 a.m. UTC
Check the hardware version of DSI. Versions 1.30 & 1.31 are only
supported.

Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
---
 drivers/video/stm32/stm32_dsi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Comments

Patrick Delaunay June 24, 2020, 1:24 p.m. UTC | #1
Hi Yannick

> From: Yannick FERTRE <yannick.fertre at st.com>
> Sent: mercredi 24 juin 2020 10:44
> 
> Check the hardware version of DSI. Versions 1.30 & 1.31 are only supported.
> 
> Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
> ---
>  drivers/video/stm32/stm32_dsi.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>

Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>

Reagrds

Patrick
Philippe CORNU June 26, 2020, 9:08 a.m. UTC | #2
Hi Yannick,
Many thanks for your patch,

Reviewed-by: Philippe Cornu <philippe.cornu at st.com>

Philippe :-)

On 6/24/20 10:43 AM, Yannick Fertre wrote:
> Check the hardware version of DSI. Versions 1.30 & 1.31 are only
> supported.
> 
> Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
> ---
>   drivers/video/stm32/stm32_dsi.c | 10 +++++++++-
>   1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c
> index 04796435f1..31ab8ebec7 100644
> --- a/drivers/video/stm32/stm32_dsi.c
> +++ b/drivers/video/stm32/stm32_dsi.c
> @@ -271,7 +271,6 @@ static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings,
>   	u32 val;
>   
>   	/* Update lane capabilities according to hw version */
> -	dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
>   	dsi->lane_min_kbps = LANE_MIN_KBPS;
>   	dsi->lane_max_kbps = LANE_MAX_KBPS;
>   	if (dsi->hw_version == HWVER_131) {
> @@ -475,6 +474,15 @@ static int stm32_dsi_probe(struct udevice *dev)
>   	/* Reset */
>   	reset_deassert(&rst);
>   
> +	/* check hardware version */
> +	priv->hw_version = dsi_read(priv, DSI_VERSION) & VERSION;
> +	if (priv->hw_version != HWVER_130 &&
> +	    priv->hw_version != HWVER_131) {
> +		dev_err(dev, "DSI version 0x%x not supported\n", priv->hw_version);
> +		ret = -ENODEV;
> +		goto err_clk;
> +	}
> +
>   	return 0;
>   err_clk:
>   	clk_disable(&clk);
>
Anatolij Gustschin June 29, 2020, 7:01 a.m. UTC | #3
On Wed, 24 Jun 2020 10:43:59 +0200
Yannick Fertre yannick.fertre at st.com wrote:

> Check the hardware version of DSI. Versions 1.30 & 1.31 are only
> supported.
> 
> Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
> ---
>  drivers/video/stm32/stm32_dsi.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)

Applied to u-boot-video/master, thanks!

--
Anatolij
diff mbox series

Patch

diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c
index 04796435f1..31ab8ebec7 100644
--- a/drivers/video/stm32/stm32_dsi.c
+++ b/drivers/video/stm32/stm32_dsi.c
@@ -271,7 +271,6 @@  static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings,
 	u32 val;
 
 	/* Update lane capabilities according to hw version */
-	dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
 	dsi->lane_min_kbps = LANE_MIN_KBPS;
 	dsi->lane_max_kbps = LANE_MAX_KBPS;
 	if (dsi->hw_version == HWVER_131) {
@@ -475,6 +474,15 @@  static int stm32_dsi_probe(struct udevice *dev)
 	/* Reset */
 	reset_deassert(&rst);
 
+	/* check hardware version */
+	priv->hw_version = dsi_read(priv, DSI_VERSION) & VERSION;
+	if (priv->hw_version != HWVER_130 &&
+	    priv->hw_version != HWVER_131) {
+		dev_err(dev, "DSI version 0x%x not supported\n", priv->hw_version);
+		ret = -ENODEV;
+		goto err_clk;
+	}
+
 	return 0;
 err_clk:
 	clk_disable(&clk);