@@ -8,20 +8,12 @@
#include <common.h>
#include <env.h>
#include <errno.h>
-#include <fdtdec.h>
#include <init.h>
#include <log.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <asm/io.h>
-#include <asm/arch/reset_manager.h>
-#include <asm/arch/system_manager.h>
#include <asm/arch/misc.h>
-#include <asm/pl310.h>
-#include <linux/libfdt.h>
#include <asm/arch/mailbox_s10.h>
-
-#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <asm/arch/reset_manager.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -45,79 +37,6 @@ static Altera_desc altera_fpga[] = {
},
};
-/*
- * DesignWare Ethernet initialization
- */
-#ifdef CONFIG_ETH_DESIGNWARE
-
-static u32 socfpga_phymode_setup(u32 gmac_index, const char *phymode)
-{
- u32 modereg;
-
- if (!phymode)
- return -EINVAL;
-
- if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii") ||
- !strcmp(phymode, "sgmii"))
- modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
- else if (!strcmp(phymode, "rgmii"))
- modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
- else if (!strcmp(phymode, "rmii"))
- modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
- else
- return -EINVAL;
-
- clrsetbits_le32(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC0 +
- (gmac_index * sizeof(u32)),
- SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, modereg);
-
- return 0;
-}
-
-static int socfpga_set_phymode(void)
-{
- const void *fdt = gd->fdt_blob;
- struct fdtdec_phandle_args args;
- const char *phy_mode;
- u32 gmac_index;
- int nodes[3]; /* Max. 3 GMACs */
- int ret, count;
- int i, node;
-
- count = fdtdec_find_aliases_for_id(fdt, "ethernet",
- COMPAT_ALTERA_SOCFPGA_DWMAC,
- nodes, ARRAY_SIZE(nodes));
- for (i = 0; i < count; i++) {
- node = nodes[i];
- if (node <= 0)
- continue;
-
- ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
- "#reset-cells", 1, 0,
- &args);
- if (ret || args.args_count != 1) {
- debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
- continue;
- }
-
- gmac_index = args.args[0] - EMAC0_RESET;
-
- phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
- ret = socfpga_phymode_setup(gmac_index, phy_mode);
- if (ret) {
- debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
- continue;
- }
- }
-
- return 0;
-}
-#else
-static int socfpga_set_phymode(void)
-{
- return 0;
-};
-#endif
/*
* Print CPU information
@@ -139,7 +58,6 @@ int arch_misc_init(void)
sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz());
env_set("qspi_clock", qspi_string);
- socfpga_set_phymode();
return 0;
}
#endif
'dwmac_socfpga' driver will setup the PHY interface during probe. PHY interface setup in arch_misc_init() is no longer needed. Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com> --- arch/arm/mach-socfpga/misc_s10.c | 84 +------------------------------- 1 file changed, 1 insertion(+), 83 deletions(-)