diff mbox series

[v2,2/8] dt-bindings: pinctrl: imx8mm: add alternative uart muxings

Message ID 20200126035522.510799-3-marcel@ziswiler.com
State New
Headers show
Series board: toradex: prepare and add Verdin iMX8M Mini support | expand

Commit Message

Marcel Ziswiler Jan. 26, 2020, 3:55 a.m. UTC
From: Max Krummenacher <max.krummenacher at toradex.com>

Add alternative UART muxing defines.

Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>

---

Changes in v2:
- Fixed some copy-paste errors.

 arch/arm/dts/imx8mm-pinfunc.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Frieder Schrempf Jan. 27, 2020, 9:10 a.m. UTC | #1
Hi,

On 26.01.20 04:55, Marcel Ziswiler wrote:
> From: Max Krummenacher <max.krummenacher at toradex.com>
> 
> Add alternative UART muxing defines.
> 
> Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>

Patch 1/8 and 2/8 in this series change the pin definitions for the 
i.MX8MM so that they deviate from the definitions in the Linux kernel.

As Fabio already pointed out for v1, please instead of adding these 
changes, just sync with the definitions in linux-next [1], which should 
already contain these additions from what I can see.

Thanks,
Frieder

[1]: 
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h

> 
> ---
> 
> Changes in v2:
> - Fixed some copy-paste errors.
> 
>   arch/arm/dts/imx8mm-pinfunc.h | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-pinfunc.h
> index 3e9955566a..e7fac56db3 100644
> --- a/arch/arm/dts/imx8mm-pinfunc.h
> +++ b/arch/arm/dts/imx8mm-pinfunc.h
> @@ -472,21 +472,37 @@
>   #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
>   #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
>   #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
> +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
> +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
> +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_CTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
> +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x000 0x4 0x0
>   #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
>   #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
>   #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
>   #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
>   #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
> +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
> +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
> +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_RTS_B                               0x1D4 0x43C 0x000 0x4 0x0
> +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
>   #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
>   #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
>   #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
>   #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
>   #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
> +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x000 0x4 0x0
> +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_TX                                 0x1D8 0x440 0x4FC 0x4 0x2
> +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_RX                                 0x1D8 0x440 0x4FC 0x4 0x2
> +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
>   #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
>   #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
>   #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
>   #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
>   #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
> +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_RX                                  0x1DC 0x444 0x000 0x4 0x0
> +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x4FC 0x4 0x3
> +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4FC 0x4 0x3
> +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_TX                                  0x1DC 0x444 0x000 0x4 0x0
>   #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
>   #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
>   #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
>
Marcel Ziswiler Jan. 28, 2020, 12:38 p.m. UTC | #2
Hi Frieder

On Mon, 2020-01-27 at 09:10 +0000, Schrempf Frieder wrote:
> Hi,
> 
> On 26.01.20 04:55, Marcel Ziswiler wrote:
> > From: Max Krummenacher <max.krummenacher at toradex.com>
> > 
> > Add alternative UART muxing defines.
> > 
> > Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
> 
> Patch 1/8 and 2/8 in this series change the pin definitions for the 
> i.MX8MM so that they deviate from the definitions in the Linux
> kernel.

Yes, I agree. This is not the best approach.

> As Fabio already pointed out for v1, please instead of adding these 
> changes, just sync with the definitions in linux-next [1], which
> should 
> already contain these additions from what I can see.

We had a thorough look at this and while we first were in doubt this
being correct in linux-next we understand now that it just implements
whatever bad UART notation used in NXP's reference manual [2] (section
16.2.2 External Signals e.g. anybody intimately familiar with UARTs
knows that a DTE vs. DCE TX pin would have different directions [2]).
Anyway, I will adhere to Fabio and your guidance and just sync with
linux-next for a v3.

> Thanks,
> Frieder

Thanks!

Cheers

Marcel

> [1]: 
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h

[2] https://www.nxp.com/webapp/Download?colCode=IMX8MMRM
[3] https://en.wikipedia.org/wiki/RS-232#Data_and_control_signals

> > ---
> > 
> > Changes in v2:
> > - Fixed some copy-paste errors.
> > 
> >   arch/arm/dts/imx8mm-pinfunc.h | 16 ++++++++++++++++
> >   1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-
> > pinfunc.h
> > index 3e9955566a..e7fac56db3 100644
> > --- a/arch/arm/dts/imx8mm-pinfunc.h
> > +++ b/arch/arm/dts/imx8mm-pinfunc.h
> > @@ -472,21 +472,37 @@
> >   #define
> > MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                 
> >  0x1D0 0x438 0x000 0x0 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                     
> >  0x1D0 0x438 0x000 0x1 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                 
> >  0x1D0 0x438 0x4D0 0x2 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                              
> >  0x1D0 0x438 0x000 0x4 0x0
> > +#define
> > MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_RTS_B                              
> >  0x1D0 0x438 0x4F8 0x4 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_CTS_B                              
> >  0x1D0 0x438 0x4F8 0x4 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                              
> >  0x1D0 0x438 0x000 0x4 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                   
> >  0x1D0 0x438 0x000 0x5 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                
> >  0x1D0 0x438 0x000 0x7 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                
> >  0x1D4 0x43C 0x000 0x0 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                
> >  0x1D4 0x43C 0x000 0x1 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                
> >  0x1D4 0x43C 0x4D4 0x2 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                              
> >  0x1D4 0x43C 0x4F8 0x4 0x3
> > +#define
> > MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_CTS_B                              
> >  0x1D4 0x43C 0x000 0x4 0x0
> > +#define
> > MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_RTS_B                              
> >  0x1D4 0x43C 0x000 0x4 0x0
> > +#define
> > MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                              
> >  0x1D4 0x43C 0x4F8 0x4 0x3
> >   #define
> > MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                   
> >  0x1D4 0x43C 0x000 0x5 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                 
> >  0x1D4 0x43C 0x000 0x7 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                
> >  0x1D8 0x440 0x000 0x0 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                               
> >  0x1D8 0x440 0x000 0x1 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                               
> >  0x1D8 0x440 0x4D8 0x2 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                
> >  0x1D8 0x440 0x000 0x4 0x0
> > +#define
> > MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_TX                                
> >  0x1D8 0x440 0x4FC 0x4 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_RX                                
> >  0x1D8 0x440 0x4FC 0x4 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                
> >  0x1D8 0x440 0x000 0x4 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                  
> >  0x1D8 0x440 0x000 0x5 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                
> >  0x1D8 0x440 0x000 0x7 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                 
> >  0x1DC 0x444 0x000 0x0 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                
> >  0x1DC 0x444 0x000 0x1 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                
> >  0x1DC 0x444 0x4DC 0x2 0x2
> > +#define
> > MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_RX                                 
> >  0x1DC 0x444 0x000 0x4 0x0
> > +#define
> > MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                 
> >  0x1DC 0x444 0x4FC 0x4 0x3
> > +#define
> > MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                 
> >  0x1DC 0x444 0x4FC 0x4 0x3
> > +#define
> > MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_TX                                 
> >  0x1DC 0x444 0x000 0x4 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                    
> >  0x1DC 0x444 0x000 0x5 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                 
> >  0x1DC 0x444 0x000 0x7 0x0
> >   #define
> > MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                
> >  0x1E0 0x448 0x000 0x0 0x0
Frieder Schrempf Jan. 28, 2020, 1:03 p.m. UTC | #3
On 28.01.20 13:38, Marcel Ziswiler wrote:
> Hi Frieder
> 
> On Mon, 2020-01-27 at 09:10 +0000, Schrempf Frieder wrote:
>> Hi,
>>
>> On 26.01.20 04:55, Marcel Ziswiler wrote:
>>> From: Max Krummenacher <max.krummenacher at toradex.com>
>>>
>>> Add alternative UART muxing defines.
>>>
>>> Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
>>
>> Patch 1/8 and 2/8 in this series change the pin definitions for the
>> i.MX8MM so that they deviate from the definitions in the Linux
>> kernel.
> 
> Yes, I agree. This is not the best approach.
> 
>> As Fabio already pointed out for v1, please instead of adding these
>> changes, just sync with the definitions in linux-next [1], which
>> should
>> already contain these additions from what I can see.
> 
> We had a thorough look at this and while we first were in doubt this
> being correct in linux-next we understand now that it just implements
> whatever bad UART notation used in NXP's reference manual [2] (section
> 16.2.2 External Signals e.g. anybody intimately familiar with UARTs
> knows that a DTE vs. DCE TX pin would have different directions [2]).

Yes the notation of the UART pins and signals for i.MX SoCs has always 
been questionable.

> Anyway, I will adhere to Fabio and your guidance and just sync with
> linux-next for a v3.

Ok, thanks!

> 
>> Thanks,
>> Frieder
> 
> Thanks!
> 
> Cheers
> 
> Marcel
> 
>> [1]:
>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
> 
> [2] https://www.nxp.com/webapp/Download?colCode=IMX8MMRM
> [3] https://en.wikipedia.org/wiki/RS-232#Data_and_control_signals
> 
>>> ---
>>>
>>> Changes in v2:
>>> - Fixed some copy-paste errors.
>>>
>>>    arch/arm/dts/imx8mm-pinfunc.h | 16 ++++++++++++++++
>>>    1 file changed, 16 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-
>>> pinfunc.h
>>> index 3e9955566a..e7fac56db3 100644
>>> --- a/arch/arm/dts/imx8mm-pinfunc.h
>>> +++ b/arch/arm/dts/imx8mm-pinfunc.h
>>> @@ -472,21 +472,37 @@
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK
>>>   0x1D0 0x438 0x000 0x0 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK
>>>   0x1D0 0x438 0x000 0x1 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK
>>>   0x1D0 0x438 0x4D0 0x2 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B
>>>   0x1D0 0x438 0x000 0x4 0x0
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_RTS_B
>>>   0x1D0 0x438 0x4F8 0x4 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_CTS_B
>>>   0x1D0 0x438 0x4F8 0x4 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B
>>>   0x1D0 0x438 0x000 0x4 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29
>>>   0x1D0 0x438 0x000 0x5 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1
>>>   0x1D0 0x438 0x000 0x7 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0
>>>   0x1D4 0x43C 0x000 0x0 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1
>>>   0x1D4 0x43C 0x000 0x1 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0
>>>   0x1D4 0x43C 0x4D4 0x2 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B
>>>   0x1D4 0x43C 0x4F8 0x4 0x3
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_CTS_B
>>>   0x1D4 0x43C 0x000 0x4 0x0
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_RTS_B
>>>   0x1D4 0x43C 0x000 0x4 0x0
>>> +#define
>>> MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B
>>>   0x1D4 0x43C 0x4F8 0x4 0x3
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30
>>>   0x1D4 0x43C 0x000 0x5 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0
>>>   0x1D4 0x43C 0x000 0x7 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC
>>>   0x1D8 0x440 0x000 0x0 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2
>>>   0x1D8 0x440 0x000 0x1 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1
>>>   0x1D8 0x440 0x4D8 0x2 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX
>>>   0x1D8 0x440 0x000 0x4 0x0
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_TX
>>>   0x1D8 0x440 0x4FC 0x4 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_RX
>>>   0x1D8 0x440 0x4FC 0x4 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX
>>>   0x1D8 0x440 0x000 0x4 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31
>>>   0x1D8 0x440 0x000 0x5 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1
>>>   0x1D8 0x440 0x000 0x7 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK
>>>   0x1DC 0x444 0x000 0x0 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2
>>>   0x1DC 0x444 0x000 0x1 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2
>>>   0x1DC 0x444 0x4DC 0x2 0x2
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_RX
>>>   0x1DC 0x444 0x000 0x4 0x0
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX
>>>   0x1DC 0x444 0x4FC 0x4 0x3
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX
>>>   0x1DC 0x444 0x4FC 0x4 0x3
>>> +#define
>>> MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_TX
>>>   0x1DC 0x444 0x000 0x4 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0
>>>   0x1DC 0x444 0x000 0x5 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2
>>>   0x1DC 0x444 0x000 0x7 0x0
>>>    #define
>>> MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0
>>>   0x1E0 0x448 0x000 0x0 0x0
>
diff mbox series

Patch

diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-pinfunc.h
index 3e9955566a..e7fac56db3 100644
--- a/arch/arm/dts/imx8mm-pinfunc.h
+++ b/arch/arm/dts/imx8mm-pinfunc.h
@@ -472,21 +472,37 @@ 
 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_CTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_RTS_B                               0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_TX                                 0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_RX                                 0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_RX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_TX                                  0x1DC 0x444 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0