diff mbox series

usb: gadget: Handle SPL_* configs

Message ID 20200127124053.417505-1-nathan@nathanrossi.com
State New
Headers show
Series usb: gadget: Handle SPL_* configs | expand

Commit Message

Nathan Rossi Jan. 27, 2020, 12:40 p.m. UTC 
Handle selection of objects based on $(SPL_) to allow for normal and SPL
builds to have differing object compilation.

Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
---
 drivers/usb/gadget/Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

---
2.24.1

Comments

Lukasz Majewski Jan. 27, 2020, 12:51 p.m. UTC | #1 
Hi Nathan,

> Handle selection of objects based on $(SPL_) to allow for normal and
> SPL builds to have differing object compilation.

Could you share the exact use case? I do guess that you want to add
some gadget(s) to SPL?

(Such changes may cause issues on boards already using this feature -
could you run:

./tools/buildman/buildman.py --branch=HEAD siemens samsung bbb
--detail --verbose --show_errors --force-build --count=1
--output-dir=./BUILD/



> 
> Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> ---
>  drivers/usb/gadget/Makefile | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index 70f3bf43e7..8967745513 100644
> --- a/drivers/usb/gadget/Makefile
> +++ b/drivers/usb/gadget/Makefile
> @@ -3,8 +3,8 @@
>  # (C) Copyright 2000-2007
>  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>  
> -obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
> -obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
> +obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o usbstring.o
> +obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o config.o usbstring.o
>  
>  ifdef CONFIG_SPL_BUILD
>  obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
> @@ -13,7 +13,7 @@ obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
>  endif
>  
>  # new USB gadget layer dependencies
> -ifdef CONFIG_USB_GADGET
> +ifdef CONFIG_$(SPL_)USB_GADGET
>  obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
>  obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
>  obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> @@ -31,7 +31,7 @@ obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
>  obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
>  endif
>  endif
> -ifdef CONFIG_USB_ETHER
> +ifdef CONFIG_$(SPL_)USB_ETHER
>  obj-y += ether.o
>  obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
>  obj-$(CONFIG_CI_UDC)	+= ci_udc.o
> ---
> 2.24.1




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200127/6a0866d3/attachment.sig>
Nathan Rossi Jan. 28, 2020, 7:50 a.m. UTC | #2 
On Mon, 27 Jan 2020 at 22:51, Lukasz Majewski <lukma at denx.de> wrote:
>
> Hi Nathan,
>
> > Handle selection of objects based on $(SPL_) to allow for normal and
> > SPL builds to have differing object compilation.
>
> Could you share the exact use case? I do guess that you want to add
> some gadget(s) to SPL?

I am primarily trying to disable SPL_ENV_SUPPORT for beaglebone
(am335x_evm). SPL_USB_ETHER has a dependency on SPL_ENV_SUPPORT, thus
the desire to disable it (whilst leaving SPL_USB_GADGET enabled).

>
> (Such changes may cause issues on boards already using this feature -
> could you run:
>
> ./tools/buildman/buildman.py --branch=HEAD siemens samsung bbb
> --detail --verbose --show_errors --force-build --count=1
> --output-dir=./BUILD/

Running this showed no regressions. Also I noticed "bbb" does not
refer to any boards?

Thanks,
Nathan

>
>
>
> >
> > Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> > ---
> >  drivers/usb/gadget/Makefile | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> > index 70f3bf43e7..8967745513 100644
> > --- a/drivers/usb/gadget/Makefile
> > +++ b/drivers/usb/gadget/Makefile
> > @@ -3,8 +3,8 @@
> >  # (C) Copyright 2000-2007
> >  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> >
> > -obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
> > -obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
> > +obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o usbstring.o
> > +obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o config.o usbstring.o
> >
> >  ifdef CONFIG_SPL_BUILD
> >  obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
> > @@ -13,7 +13,7 @@ obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
> >  endif
> >
> >  # new USB gadget layer dependencies
> > -ifdef CONFIG_USB_GADGET
> > +ifdef CONFIG_$(SPL_)USB_GADGET
> >  obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
> >  obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
> >  obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> > @@ -31,7 +31,7 @@ obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
> >  obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
> >  endif
> >  endif
> > -ifdef CONFIG_USB_ETHER
> > +ifdef CONFIG_$(SPL_)USB_ETHER
> >  obj-y += ether.o
> >  obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
> >  obj-$(CONFIG_CI_UDC) += ci_udc.o
> > ---
> > 2.24.1
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
Lukasz Majewski Jan. 28, 2020, 10:26 a.m. UTC | #3 
On Tue, 28 Jan 2020 17:50:03 +1000
Nathan Rossi <nathan at nathanrossi.com> wrote:

> On Mon, 27 Jan 2020 at 22:51, Lukasz Majewski <lukma at denx.de> wrote:
> >
> > Hi Nathan,
> >  
> > > Handle selection of objects based on $(SPL_) to allow for normal
> > > and SPL builds to have differing object compilation.  
> >
> > Could you share the exact use case? I do guess that you want to add
> > some gadget(s) to SPL?  
> 
> I am primarily trying to disable SPL_ENV_SUPPORT for beaglebone
> (am335x_evm). SPL_USB_ETHER has a dependency on SPL_ENV_SUPPORT, thus
> the desire to disable it (whilst leaving SPL_USB_GADGET enabled).

Ok.

> 
> >
> > (Such changes may cause issues on boards already using this feature
> > - could you run:
> >
> > ./tools/buildman/buildman.py --branch=HEAD siemens samsung bbb
> > --detail --verbose --show_errors --force-build --count=1
> > --output-dir=./BUILD/  
> 
> Running this showed no regressions. Also I noticed "bbb" does not
> refer to any boards?

I see. Then please try am335x instead.

> 
> Thanks,
> Nathan
> 
> >
> >
> >  
> > >
> > > Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> > > ---
> > >  drivers/usb/gadget/Makefile | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/usb/gadget/Makefile
> > > b/drivers/usb/gadget/Makefile index 70f3bf43e7..8967745513 100644
> > > --- a/drivers/usb/gadget/Makefile
> > > +++ b/drivers/usb/gadget/Makefile
> > > @@ -3,8 +3,8 @@
> > >  # (C) Copyright 2000-2007
> > >  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > >
> > > -obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
> > > -obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
> > > +obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o
> > > usbstring.o +obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o
> > > config.o usbstring.o
> > >
> > >  ifdef CONFIG_SPL_BUILD
> > >  obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
> > > @@ -13,7 +13,7 @@ obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
> > >  endif
> > >
> > >  # new USB gadget layer dependencies
> > > -ifdef CONFIG_USB_GADGET
> > > +ifdef CONFIG_$(SPL_)USB_GADGET
> > >  obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
> > >  obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
> > >  obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> > > @@ -31,7 +31,7 @@ obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
> > >  obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
> > >  endif
> > >  endif
> > > -ifdef CONFIG_USB_ETHER
> > > +ifdef CONFIG_$(SPL_)USB_ETHER
> > >  obj-y += ether.o
> > >  obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
> > >  obj-$(CONFIG_CI_UDC) += ci_udc.o
> > > ---
> > > 2.24.1  
> >
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200128/df514f9c/attachment.sig>
Nathan Rossi Jan. 28, 2020, 11:07 a.m. UTC | #4 
On Tue, 28 Jan 2020 at 20:26, Lukasz Majewski <lukma at denx.de> wrote:
>
> On Tue, 28 Jan 2020 17:50:03 +1000
> Nathan Rossi <nathan at nathanrossi.com> wrote:
>
> > On Mon, 27 Jan 2020 at 22:51, Lukasz Majewski <lukma at denx.de> wrote:
> > >
> > > Hi Nathan,
> > >
> > > > Handle selection of objects based on $(SPL_) to allow for normal
> > > > and SPL builds to have differing object compilation.
> > >
> > > Could you share the exact use case? I do guess that you want to add
> > > some gadget(s) to SPL?
> >
> > I am primarily trying to disable SPL_ENV_SUPPORT for beaglebone
> > (am335x_evm). SPL_USB_ETHER has a dependency on SPL_ENV_SUPPORT, thus
> > the desire to disable it (whilst leaving SPL_USB_GADGET enabled).
>
> Ok.
>
> >
> > >
> > > (Such changes may cause issues on boards already using this feature
> > > - could you run:
> > >
> > > ./tools/buildman/buildman.py --branch=HEAD siemens samsung bbb
> > > --detail --verbose --show_errors --force-build --count=1
> > > --output-dir=./BUILD/
> >
> > Running this showed no regressions. Also I noticed "bbb" does not
> > refer to any boards?
>
> I see. Then please try am335x instead.

There are no regressions for those boards either.

Regards,
Nathan

>
> >
> > Thanks,
> > Nathan
> >
> > >
> > >
> > >
> > > >
> > > > Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> > > > ---
> > > >  drivers/usb/gadget/Makefile | 8 ++++----
> > > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/gadget/Makefile
> > > > b/drivers/usb/gadget/Makefile index 70f3bf43e7..8967745513 100644
> > > > --- a/drivers/usb/gadget/Makefile
> > > > +++ b/drivers/usb/gadget/Makefile
> > > > @@ -3,8 +3,8 @@
> > > >  # (C) Copyright 2000-2007
> > > >  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > > >
> > > > -obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
> > > > -obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
> > > > +obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o
> > > > usbstring.o +obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o
> > > > config.o usbstring.o
> > > >
> > > >  ifdef CONFIG_SPL_BUILD
> > > >  obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
> > > > @@ -13,7 +13,7 @@ obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
> > > >  endif
> > > >
> > > >  # new USB gadget layer dependencies
> > > > -ifdef CONFIG_USB_GADGET
> > > > +ifdef CONFIG_$(SPL_)USB_GADGET
> > > >  obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
> > > >  obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
> > > >  obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> > > > @@ -31,7 +31,7 @@ obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
> > > >  obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
> > > >  endif
> > > >  endif
> > > > -ifdef CONFIG_USB_ETHER
> > > > +ifdef CONFIG_$(SPL_)USB_ETHER
> > > >  obj-y += ether.o
> > > >  obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
> > > >  obj-$(CONFIG_CI_UDC) += ci_udc.o
> > > > ---
> > > > 2.24.1
> > >
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Lukasz Majewski
> > >
> > > --
> > >
> > > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > > lukma at denx.de
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
diff mbox series

Patch

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 70f3bf43e7..8967745513 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,8 +3,8 @@ 
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
-obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
+obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o usbstring.o
+obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o config.o usbstring.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
@@ -13,7 +13,7 @@  obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
 endif
 
 # new USB gadget layer dependencies
-ifdef CONFIG_USB_GADGET
+ifdef CONFIG_$(SPL_)USB_GADGET
 obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
 obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
 obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
@@ -31,7 +31,7 @@  obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
 obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
 endif
 endif
-ifdef CONFIG_USB_ETHER
+ifdef CONFIG_$(SPL_)USB_ETHER
 obj-y += ether.o
 obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o