diff mbox series

[1/3] stm32mp1: move stboard command in board/st/common directory

Message ID 20200113141742.28182-2-patrick.delaunay@st.com
State Accepted
Commit ba2c20ce7aba106d0101e04910be64fe3f855096
Headers show
Series stm32mp1: split board and SOC support for STM32MP15x family | expand

Commit Message

Patrick Delaunay Jan. 13, 2020, 2:17 p.m. UTC
Move the ST command in board/st/common, as this command is only used
by ST board. Prepare the support in U-Boot of boards with STM32MP15x
SOC but not STMicroelectronics.

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 board/st/common/Kconfig                     | 6 ++++++
 board/st/common/MAINTAINERS                 | 6 ++++++
 board/st/common/Makefile                    | 6 ++++++
 board/st/{stm32mp1 => common}/cmd_stboard.c | 3 +++
 board/st/stm32mp1/Kconfig                   | 9 ++-------
 board/st/stm32mp1/Makefile                  | 1 -
 6 files changed, 23 insertions(+), 8 deletions(-)
 create mode 100644 board/st/common/Kconfig
 create mode 100644 board/st/common/MAINTAINERS
 create mode 100644 board/st/common/Makefile
 rename board/st/{stm32mp1 => common}/cmd_stboard.c (98%)

Comments

Patrice CHOTARD Jan. 17, 2020, 12:45 p.m. UTC | #1
Hi Patrick

On 1/13/20 3:17 PM, Patrick Delaunay wrote:
> Move the ST command in board/st/common, as this command is only used
> by ST board. Prepare the support in U-Boot of boards with STM32MP15x
> SOC but not STMicroelectronics.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
>  board/st/common/Kconfig                     | 6 ++++++
>  board/st/common/MAINTAINERS                 | 6 ++++++
>  board/st/common/Makefile                    | 6 ++++++
>  board/st/{stm32mp1 => common}/cmd_stboard.c | 3 +++
>  board/st/stm32mp1/Kconfig                   | 9 ++-------
>  board/st/stm32mp1/Makefile                  | 1 -
>  6 files changed, 23 insertions(+), 8 deletions(-)
>  create mode 100644 board/st/common/Kconfig
>  create mode 100644 board/st/common/MAINTAINERS
>  create mode 100644 board/st/common/Makefile
>  rename board/st/{stm32mp1 => common}/cmd_stboard.c (98%)
>
> diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
> new file mode 100644
> index 0000000000..1824087afc
> --- /dev/null
> +++ b/board/st/common/Kconfig
> @@ -0,0 +1,6 @@
> +config CMD_STBOARD
> +	bool "stboard - command for OTP board information"
> +	default y
> +	help
> +	  This compile the stboard command to
> +	  read and write the board in the OTP.
> diff --git a/board/st/common/MAINTAINERS b/board/st/common/MAINTAINERS
> new file mode 100644
> index 0000000000..3b02f4ab98
> --- /dev/null
> +++ b/board/st/common/MAINTAINERS
> @@ -0,0 +1,6 @@
> +ST BOARDS
> +M:	Patrick Delaunay <patrick.delaunay at st.com>
> +L:	uboot-stm32 at st-md-mailman.stormreply.com (moderated for non-subscribers)
> +T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git
> +S:	Maintained
> +F:	board/st/common/
> diff --git a/board/st/common/Makefile b/board/st/common/Makefile
> new file mode 100644
> index 0000000000..8553606b90
> --- /dev/null
> +++ b/board/st/common/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +#
> +# Copyright (C) 2020, STMicroelectronics - All Rights Reserved
> +#
> +
> +obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o
> diff --git a/board/st/stm32mp1/cmd_stboard.c b/board/st/common/cmd_stboard.c
> similarity index 98%
> rename from board/st/stm32mp1/cmd_stboard.c
> rename to board/st/common/cmd_stboard.c
> index 04352ae8ed..e994a88e71 100644
> --- a/board/st/stm32mp1/cmd_stboard.c
> +++ b/board/st/common/cmd_stboard.c
> @@ -3,6 +3,7 @@
>   * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
>   */
>  
> +#ifndef CONFIG_SPL_BUILD
>  #include <common.h>
>  #include <console.h>
>  #include <misc.h>
> @@ -143,3 +144,5 @@ U_BOOT_CMD(stboard, 6, 0, do_stboard,
>  	   "  - Variant: 1 ... 15\n"
>  	   "  - Revision: A...O\n"
>  	   "  - BOM: 1...15\n");
> +
> +#endif
> diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
> index 4fa2360b4f..9f985e5775 100644
> --- a/board/st/stm32mp1/Kconfig
> +++ b/board/st/stm32mp1/Kconfig
> @@ -15,15 +15,10 @@ config ENV_SECT_SIZE
>  config ENV_OFFSET
>  	default 0x280000 if ENV_IS_IN_SPI_FLASH
>  
> -config CMD_STBOARD
> -	bool "stboard - command for OTP board information"
> -	default y
> -	help
> -	  This compile the stboard command to
> -	  read and write the board in the OTP.
> -
>  config TARGET_STM32MP157C_DK2
>  	bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board"
>  	default y
>  
> +source "board/st/common/Kconfig"
> +
>  endif
> diff --git a/board/st/stm32mp1/Makefile b/board/st/stm32mp1/Makefile
> index 3c6c035b11..8188075b1a 100644
> --- a/board/st/stm32mp1/Makefile
> +++ b/board/st/stm32mp1/Makefile
> @@ -7,7 +7,6 @@ ifdef CONFIG_SPL_BUILD
>  obj-y += spl.o
>  else
>  obj-y += stm32mp1.o
> -obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o
>  endif
>  
>  obj-y += board.o

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks
Patrick Delaunay Jan. 17, 2020, 3:11 p.m. UTC | #2
Hi,

> From: Patrick DELAUNAY <patrick.delaunay at st.com>
> Sent: lundi 13 janvier 2020 15:18
> 
> Move the ST command in board/st/common, as this command is only used by ST
> board. Prepare the support in U-Boot of boards with STM32MP15x SOC but not
> STMicroelectronics.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---

Applied to u-boot-stm32/master, thanks!

Regards
Patrick
diff mbox series

Patch

diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
new file mode 100644
index 0000000000..1824087afc
--- /dev/null
+++ b/board/st/common/Kconfig
@@ -0,0 +1,6 @@ 
+config CMD_STBOARD
+	bool "stboard - command for OTP board information"
+	default y
+	help
+	  This compile the stboard command to
+	  read and write the board in the OTP.
diff --git a/board/st/common/MAINTAINERS b/board/st/common/MAINTAINERS
new file mode 100644
index 0000000000..3b02f4ab98
--- /dev/null
+++ b/board/st/common/MAINTAINERS
@@ -0,0 +1,6 @@ 
+ST BOARDS
+M:	Patrick Delaunay <patrick.delaunay at st.com>
+L:	uboot-stm32 at st-md-mailman.stormreply.com (moderated for non-subscribers)
+T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git
+S:	Maintained
+F:	board/st/common/
diff --git a/board/st/common/Makefile b/board/st/common/Makefile
new file mode 100644
index 0000000000..8553606b90
--- /dev/null
+++ b/board/st/common/Makefile
@@ -0,0 +1,6 @@ 
+# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+#
+# Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+#
+
+obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o
diff --git a/board/st/stm32mp1/cmd_stboard.c b/board/st/common/cmd_stboard.c
similarity index 98%
rename from board/st/stm32mp1/cmd_stboard.c
rename to board/st/common/cmd_stboard.c
index 04352ae8ed..e994a88e71 100644
--- a/board/st/stm32mp1/cmd_stboard.c
+++ b/board/st/common/cmd_stboard.c
@@ -3,6 +3,7 @@ 
  * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
  */
 
+#ifndef CONFIG_SPL_BUILD
 #include <common.h>
 #include <console.h>
 #include <misc.h>
@@ -143,3 +144,5 @@  U_BOOT_CMD(stboard, 6, 0, do_stboard,
 	   "  - Variant: 1 ... 15\n"
 	   "  - Revision: A...O\n"
 	   "  - BOM: 1...15\n");
+
+#endif
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 4fa2360b4f..9f985e5775 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -15,15 +15,10 @@  config ENV_SECT_SIZE
 config ENV_OFFSET
 	default 0x280000 if ENV_IS_IN_SPI_FLASH
 
-config CMD_STBOARD
-	bool "stboard - command for OTP board information"
-	default y
-	help
-	  This compile the stboard command to
-	  read and write the board in the OTP.
-
 config TARGET_STM32MP157C_DK2
 	bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board"
 	default y
 
+source "board/st/common/Kconfig"
+
 endif
diff --git a/board/st/stm32mp1/Makefile b/board/st/stm32mp1/Makefile
index 3c6c035b11..8188075b1a 100644
--- a/board/st/stm32mp1/Makefile
+++ b/board/st/stm32mp1/Makefile
@@ -7,7 +7,6 @@  ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
 obj-y += stm32mp1.o
-obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o
 endif
 
 obj-y += board.o