| Message ID | 20200108015305.13932-1-peng.fan@nxp.com |
|---|---|
| State | Accepted |
| Commit | 240ece49c7c1fcb724b999dbe77347b6b195874e |
| Headers | show |
| Series | imx: imx8qxp_mek: update README | expand |
Hi Peng On Tue, Jan 7, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote: > > Update README to use 4.19.35_1.1.0 released firmware images. I have tried the same here and I still get a hang with Ethernet. If I manually remove Ethernet support from the defconfig then I am able to get into the U-Boot prompt. Could you please share your U-Boot logs? I use a i.MX8QXP mek with B0 silicon and revC1. Thanks
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README > > Hi Peng > > On Tue, Jan 7, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote: > > > > Update README to use 4.19.35_1.1.0 released firmware images. > > I have tried the same here and I still get a hang with Ethernet. If I manually > remove Ethernet support from the defconfig then I am able to get into the > U-Boot prompt. > > Could you please share your U-Boot logs? I not have a board at hand. Will paste the log tomorrow. Thanks, Peng. > > I use a i.MX8QXP mek with B0 silicon and revC1. > > Thanks
> Subject: RE: [PATCH] imx: imx8qxp_mek: update README > > > Subject: Re: [PATCH] imx: imx8qxp_mek: update README > > > > Hi Peng > > > > On Tue, Jan 7, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote: > > > > > > Update README to use 4.19.35_1.1.0 released firmware images. > > > > I have tried the same here and I still get a hang with Ethernet. If I > > manually remove Ethernet support from the defconfig then I am able to > > get into the U-Boot prompt. > > > > Could you please share your U-Boot logs? > > I not have a board at hand. Will paste the log tomorrow. The ipg clk patch needs to be reverted for now. Anyway the log as below: U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800 U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 19C Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000 Net: Failed to enable ipg clk Warning: ethernet at 5b040000 using MAC address from ROM eth0: ethernet at 5b040000 Hit any key to stop autoboot: 0 => Regards, Peng. > > Thanks, > Peng. > > > > > I use a i.MX8QXP mek with B0 silicon and revC1. > > > > Thanks
Hi Peng, On Wed, Jan 8, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote: > The ipg clk patch needs to be reverted for now. Anyway the log as below: Which commit are you referring to? Can you send a revert? Is this revert needed for booting this board? > U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) > Normal Boot > WDT: Not found! > Trying to boot from MMC2_2 > Load image from MMC/SD 0x46800 > > > U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) I don't see edb89b239c in U-Boot mainline. Could you please make sure you use the latest U-Boot mainline in your test? Thanks
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README > > Hi Peng, > > On Wed, Jan 8, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote: > > > The ipg clk patch needs to be reverted for now. Anyway the log as below: > > Which commit are you referring to? Can you send a revert? Is this revert > needed for booting this board? > > > U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 > > +0800) Normal Boot > > WDT: Not found! > > Trying to boot from MMC2_2 > > Load image from MMC/SD 0x46800 > > > > > > U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) > > I don't see edb89b239c in U-Boot mainline. > > Could you please make sure you use the latest U-Boot mainline in your test? U-Boot SPL 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800 U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000 Net: Failed to enable ipg clk Warning: ethernet at 5b040000 using MAC address from ROM eth0: ethernet at 5b040000 Hit any key to stop autoboot: 0 Rebased to tom's master branch. Regards, Peng. > > Thanks
Hi Peng, On Wed, Jan 8, 2020 at 10:44 PM Peng Fan <peng.fan at nxp.com> wrote: > U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) > > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C > > Model: Freescale i.MX8QXP MEK > Board: iMX8QXP MEK > Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa I see a mismatch in the ATF version. I don't see commit f900faa inside imx_4.19.35_1.1.0 ATF version from NXP. Could you please confirm? Thanks
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README > > Hi Peng, > > On Wed, Jan 8, 2020 at 10:44 PM Peng Fan <peng.fan at nxp.com> wrote: > > > U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) > > > > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C > > > > Model: Freescale i.MX8QXP MEK > > Board: iMX8QXP MEK > > Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa > > I see a mismatch in the ATF version. > > I don't see commit f900faa inside imx_4.19.35_1.1.0 ATF version from NXP. > > Could you please confirm? I use internal repo which has this commit. commit f900faa9b1f3af69e748f2c4a9ddfd2b589e416f (HEAD -> imx_4.19.35_1.1.0, origin/imx_4.19.35_1.1.0) Author: Anson Huang <Anson.Huang at nxp.com> Date: Mon Sep 16 13:21:22 2019 +0800 plat: imx: Enable L2 ECC & parity for A72 cluster As per design team's suggestion, L2 cache's ECC & parity should be enabled for A72 cluster. Signed-off-by: Anson Huang <Anson.Huang at nxp.com> (cherry picked from commit 513348b385829ed7be346c5360b3c85341aa7ea7) commit 70fa7bcc1a2035ab8402550911b3ae29eff55371 (tag: rel_imx_4.19.35_1.1.0_rc4, tag: rel_imx_4.19.35_1.1.0, tag: lf-5.4.y-1.0.0-rc1) Author: Ji Luo <ji.luo at nxp.com> Date: Fri Oct 11 15:34:19 2019 +0800 MA-15614 imx8m: Enable wdog if WDOG_B_RESET not enabled Set the WDE bit when IMX_WDOG_B_RESET is not enabled, or reboot will fail. Change-Id: Icd4f0b1271ac3ff99b7243a85ce63479348a42f6 Signed-off-by: Ji Luo <ji.luo at nxp.com> Regards, Peng. > > Thanks
Hi Peng,
On Wed, Jan 8, 2020 at 10:50 PM Peng Fan <peng.fan at nxp.com> wrote:
> I use internal repo which has this commit.
Could you please test using the external repo as written in your patch?
With these versions I am getting:
U-Boot 2020.01-00369-g81132f1c96 (Jan 09 2020 - 10:02:47 -0300)
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 31C
Model: Freescale i.MX8QXP MEK
Board: iMX8QXP MEK
Build: SCFW 550f3079, SECO-FW d7523fe8, ATF 70fa7bc
Boot: SD1
DRAM: 3 GiB
Failed to enable ipg clk
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial at 5a060000
Out: serial at 5a060000
Err: serial at 5a060000
Net: Failed to enable ipg clk
Error: ethernet at 5b040000 address not set.
(It hangs here).
Does it work if you use the ATF 70fa7bc version?
diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README index e676e88664..6e4eb5996b 100644 --- a/board/freescale/imx8qxp_mek/README +++ b/board/freescale/imx8qxp_mek/README @@ -14,28 +14,24 @@ Get and Build the ARM Trusted firmware $ git clone https://source.codeaurora.org/external/imx/imx-atf $ cd imx-atf/ -$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 -$ make PLAT=imx8qxp bl31 +$ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0 +$ make PLAT=imx8qx bl31 Get scfw_tcm.bin and ahab-container.img ============================== -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-0.7.bin -$ chmod +x imx-sc-firmware-0.7.bin -$ ./imx-sc-firmware-0.7.bin -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.6.bin -$ chmod +x firmware-imx-7.6.bin -$ ./firmware-imx-7.6.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin +$ chmod +x imx-sc-firmware-1.2.7.1.bin +$ ./imx-sc-firmware-1.2.7.1.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin +$ chmod +x imx-seco-2.3.1.bin +$ ./imx-seco-2.3.1.bin Copy the following binaries to U-Boot folder: -$ cp imx-atf/build/imx8qxp/release/bl31.bin . -$ cp u-boot/u-boot.bin . - -Copy the following firmwares U-Boot folder : - -$ cp firmware-imx-7.6/firmware/seco/ahab-container.img . -$ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin . +$ cp imx-atf/build/imx8qx/release/bl31.bin . +$ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img +$ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin . Build U-Boot ============
Update README to use 4.19.35_1.1.0 released firmware images. Signed-off-by: Peng Fan <peng.fan at nxp.com> --- board/freescale/imx8qxp_mek/README | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-)