| Message ID | 20200420185310.6630-1-dmurphy@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | [RFC,1/3] net: phy: Add a generic phy file for TI generic PHYs | expand |
On 20. 04. 20 20:53, Dan Murphy wrote: > Add a TI Generic init file that will initialize TI PHYs that follow that > not require special handling. These PHYs can connect with the standard > MII register set. This generice file will register the PHY IDs and > names of the PHYs so when the command 'mdio list' is executed the PHY > name will display as opposed to 'Generic PHY'. > > The DP8382X PHY series is a generic PHY that requires the generic > registration. > > The DP83867 driver was updated to rename the init to a more PHY specific > init call. > > Signed-off-by: Dan Murphy <dmurphy at ti.com> I would personally do it with two patches. > --- > configs/am65x_evm_a53_defconfig | 2 +- > configs/am65x_hs_evm_a53_defconfig | 2 +- > configs/dra7xx_evm_defconfig | 2 +- > configs/dra7xx_hs_evm_defconfig | 2 +- > configs/dra7xx_hs_evm_usb_defconfig | 2 +- > configs/j721e_evm_a72_defconfig | 2 +- > configs/j721e_hs_evm_a72_defconfig | 2 +- > configs/k2g_evm_defconfig | 2 +- > configs/xilinx_versal_virt_defconfig | 2 +- > configs/xilinx_zynqmp_virt_defconfig | 2 +- > drivers/net/phy/Kconfig | 8 ++ > drivers/net/phy/Makefile | 3 +- > drivers/net/phy/dp83867.c | 3 +- > drivers/net/phy/ti_phy_init.c | 106 +++++++++++++++++++++++++++ > drivers/net/phy/ti_phy_init.h | 16 ++++ > 15 files changed, 144 insertions(+), 12 deletions(-) > create mode 100644 drivers/net/phy/ti_phy_init.c > create mode 100644 drivers/net/phy/ti_phy_init.h > > diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig > index 542bbd992c53..7051d6c40505 100644 > --- a/configs/am65x_evm_a53_defconfig > +++ b/configs/am65x_evm_a53_defconfig > @@ -101,7 +101,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT > CONFIG_SPI_FLASH_STMICRO=y > # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set > CONFIG_SPI_FLASH_MTD=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y Don't know why this name was chosen but don't you want to label it with TI? CONFIG_PHY_TI_DP83867 ? Kernel is using different symbol anyway. CONFIG_DP83867_PHY > CONFIG_PHY_FIXED=y > CONFIG_DM_ETH=y > CONFIG_E1000=y > diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig > index 9f43cee39611..29da3826f12a 100644 > --- a/configs/am65x_hs_evm_a53_defconfig > +++ b/configs/am65x_hs_evm_a53_defconfig > @@ -103,7 +103,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT > CONFIG_SPI_FLASH_STMICRO=y > # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set > CONFIG_SPI_FLASH_MTD=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_PHY_FIXED=y > CONFIG_DM_ETH=y > CONFIG_E1000=y > diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig > index 4d765da4e052..19c024889155 100644 > --- a/configs/dra7xx_evm_defconfig > +++ b/configs/dra7xx_evm_defconfig > @@ -86,7 +86,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SF_DEFAULT_MODE=0 > CONFIG_SF_DEFAULT_SPEED=76800000 > CONFIG_SPI_FLASH_SPANSION=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_DM_ETH=y > CONFIG_PHY_GIGE=y > CONFIG_MII=y > diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig > index c25d4ce5c142..e97f1a3ba338 100644 > --- a/configs/dra7xx_hs_evm_defconfig > +++ b/configs/dra7xx_hs_evm_defconfig > @@ -89,7 +89,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SF_DEFAULT_MODE=0 > CONFIG_SF_DEFAULT_SPEED=76800000 > CONFIG_SPI_FLASH_SPANSION=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_DM_ETH=y > CONFIG_PHY_GIGE=y > CONFIG_MII=y > diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig > index 8e74496b2ccd..46970e31f02e 100644 > --- a/configs/dra7xx_hs_evm_usb_defconfig > +++ b/configs/dra7xx_hs_evm_usb_defconfig > @@ -87,7 +87,7 @@ CONFIG_SF_DEFAULT_MODE=0 > CONFIG_SF_DEFAULT_SPEED=76800000 > CONFIG_SPI_FLASH_BAR=y > CONFIG_SPI_FLASH_SPANSION=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_DM_ETH=y > CONFIG_PHY_GIGE=y > CONFIG_MII=y > diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig > index e9e82bb4309d..784a6ff396c3 100644 > --- a/configs/j721e_evm_a72_defconfig > +++ b/configs/j721e_evm_a72_defconfig > @@ -124,7 +124,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT > CONFIG_SPI_FLASH_STMICRO=y > # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set > CONFIG_SPI_FLASH_MTD=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_PHY_FIXED=y > CONFIG_DM_ETH=y > CONFIG_TI_AM65_CPSW_NUSS=y > diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig > index a723e2718e5e..dd93a955cefd 100644 > --- a/configs/j721e_hs_evm_a72_defconfig > +++ b/configs/j721e_hs_evm_a72_defconfig > @@ -114,7 +114,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT > CONFIG_SPI_FLASH_STMICRO=y > # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set > CONFIG_SPI_FLASH_MTD=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_PHY_FIXED=y > CONFIG_DM_ETH=y > CONFIG_TI_AM65_CPSW_NUSS=y > diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig > index 5abf5faa450e..f47b1cabe9a8 100644 > --- a/configs/k2g_evm_defconfig > +++ b/configs/k2g_evm_defconfig > @@ -58,7 +58,7 @@ CONFIG_PHYLIB=y > CONFIG_PHY_MARVELL=y > CONFIG_PHY_MICREL=y > CONFIG_PHY_MICREL_KSZ8XXX=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_DM_ETH=y > CONFIG_MII=y > CONFIG_DRIVER_TI_KEYSTONE_NET=y > diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig > index e8c349261207..eb2a26bc2c7d 100644 > --- a/configs/xilinx_versal_virt_defconfig > +++ b/configs/xilinx_versal_virt_defconfig > @@ -61,7 +61,7 @@ CONFIG_SPI_FLASH_WINBOND=y > CONFIG_PHY_MARVELL=y > CONFIG_PHY_NATSEMI=y > CONFIG_PHY_REALTEK=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_PHY_VITESSE=y > CONFIG_PHY_FIXED=y > CONFIG_PHY_GIGE=y > diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig > index 7b09edd78e1b..5c320f93fe5f 100644 > --- a/configs/xilinx_zynqmp_virt_defconfig > +++ b/configs/xilinx_zynqmp_virt_defconfig > @@ -101,7 +101,7 @@ CONFIG_PHY_MICREL=y > CONFIG_PHY_MICREL_KSZ90X1=y > CONFIG_PHY_NATSEMI=y > CONFIG_PHY_REALTEK=y > -CONFIG_PHY_TI=y > +CONFIG_PHY_DP83867=y > CONFIG_PHY_VITESSE=y > CONFIG_PHY_XILINX_GMII2RGMII=y > CONFIG_PHY_FIXED=y > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig > index d1f049e62ab7..e366f10afc59 100644 > --- a/drivers/net/phy/Kconfig > +++ b/drivers/net/phy/Kconfig > @@ -244,6 +244,14 @@ config PHY_TERANETICS > config PHY_TI > bool "Texas Instruments Ethernet PHYs support" > > +config PHY_TI_GENERIC > + select PHY_TI > + bool "Texas Instruments Ethernet PHYs support" > + > +config PHY_DP83867 > + select PHY_TI > + bool "Texas Instruments Ethernet DP83867 PHY support" > + > config PHY_VITESSE > bool "Vitesse Ethernet PHYs support" > > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile > index 1d81516ecd1d..9c6d31718c00 100644 > --- a/drivers/net/phy/Makefile > +++ b/drivers/net/phy/Makefile > @@ -25,7 +25,8 @@ obj-$(CONFIG_PHY_NATSEMI) += natsemi.o > obj-$(CONFIG_PHY_REALTEK) += realtek.o > obj-$(CONFIG_PHY_SMSC) += smsc.o > obj-$(CONFIG_PHY_TERANETICS) += teranetics.o > -obj-$(CONFIG_PHY_TI) += dp83867.o > +obj-$(CONFIG_PHY_TI) += ti_phy_init.o > +obj-$(CONFIG_PHY_DP83867) += dp83867.o > obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o > obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o > obj-$(CONFIG_PHY_VITESSE) += vitesse.o > diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c > index 50804c130efd..c9ed4a44d4db 100644 > --- a/drivers/net/phy/dp83867.c > +++ b/drivers/net/phy/dp83867.c > @@ -12,6 +12,7 @@ > #include <dm.h> > #include <dt-bindings/net/ti-dp83867.h> > > +#include "ti_phy_init.h" > > /* TI DP83867 */ > #define DP83867_DEVADDR 0x1f > @@ -428,7 +429,7 @@ static struct phy_driver DP83867_driver = { > .shutdown = &genphy_shutdown, > }; > > -int phy_ti_init(void) > +int phy_dp83867_init(void) > { > phy_register(&DP83867_driver); > return 0; > diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c > new file mode 100644 > index 000000000000..11c4c166b2f5 > --- /dev/null > +++ b/drivers/net/phy/ti_phy_init.c > @@ -0,0 +1,106 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * TI Generic PHY Init to register all TI Ethernet PHYs > + * > + * Author: Dan Murphy <dmurphy at ti.com> > + * > + * Copyright (C) 2019 Texas Instruments Inc. 2020? > + */ > + > +#include <phy.h> > + > +#define DP83822_PHY_ID 0x2000a240 > +#define DP83825S_PHY_ID 0x2000a140 > +#define DP83825I_PHY_ID 0x2000a150 > +#define DP83825CM_PHY_ID 0x2000a160 > +#define DP83825CS_PHY_ID 0x2000a170 > +#define DP83826C_PHY_ID 0x2000a130 > +#define DP83826NC_PHY_ID 0x2000a110 > + > +static struct phy_driver dp83822_driver = { > + .name = "TI DP83822", > + .uid = DP83822_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +static struct phy_driver dp83825s_driver = { > + .name = "TI DP83825S", > + .uid = DP83825S_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +static struct phy_driver dp83825i_driver = { > + .name = "TI DP83825I", > + .uid = DP83825I_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +static struct phy_driver dp83825m_driver = { > + .name = "TI DP83825M", > + .uid = DP83825CM_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +static struct phy_driver dp83825cs_driver = { > + .name = "TI DP83825CS", > + .uid = DP83825CS_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +static struct phy_driver dp83826c_driver = { > + .name = "TI DP83826C", > + .uid = DP83826C_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > +static struct phy_driver dp83826nc_driver = { > + .name = "TI DP83826NC", > + .uid = DP83826NC_PHY_ID, > + .mask = 0xfffffff0, > + .features = PHY_BASIC_FEATURES, > + .config = &genphy_config_aneg, > + .startup = &genphy_startup, > + .shutdown = &genphy_shutdown, > +}; > + > +int phy_ti_init(void) > +{ > +#ifdef CONFIG_PHY_DP83867 > + phy_dp83867_init(); > +#endif > + > +#ifdef CONFIG_PHY_TI_GENERIC > + phy_register(&dp83822_driver); > + phy_register(&dp83825s_driver); > + phy_register(&dp83825i_driver); > + phy_register(&dp83825m_driver); > + phy_register(&dp83825cs_driver); > + phy_register(&dp83826c_driver); > + phy_register(&dp83826nc_driver); > +#endif I would do it in separate patch but up2you. > + > + return 0; > +} > diff --git a/drivers/net/phy/ti_phy_init.h b/drivers/net/phy/ti_phy_init.h > new file mode 100644 > index 000000000000..309da2aacccb > --- /dev/null > +++ b/drivers/net/phy/ti_phy_init.h > @@ -0,0 +1,16 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * TI Generic Ethernet PHY > + * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c > + * > + * Author: Dan Murphy <dmurphy at ti.com> > + * > + * Copyright (C) 2019 Texas Instruments Inc. 2020 > + */ > + > +#ifndef _TI_GEN_PHY_H > +#define _TI_GEN_PHY_H > + > +int phy_dp83867_init(void); > + > +#endif /* _TI_GEN_PHY_H */ > Thanks, Michal
Michal On 4/21/20 2:57 AM, Michal Simek wrote: > On 20. 04. 20 20:53, Dan Murphy wrote: >> Add a TI Generic init file that will initialize TI PHYs that follow that >> not require special handling. These PHYs can connect with the standard >> MII register set. This generice file will register the PHY IDs and >> names of the PHYs so when the command 'mdio list' is executed the PHY >> name will display as opposed to 'Generic PHY'. >> >> The DP8382X PHY series is a generic PHY that requires the generic >> registration. >> >> The DP83867 driver was updated to rename the init to a more PHY specific >> init call. >> >> Signed-off-by: Dan Murphy <dmurphy at ti.com> > I would personally do it with two patches. I was going to do 2 patches but I wanted to show the viability of why this generic file was needed.? Without the DP8382X PHY added it looks like I was just moving things around for the DP83867 and changing names. I will break it up in v2 (non-RFC if no one has serious objections to this) > >> --- >> configs/am65x_evm_a53_defconfig | 2 +- >> configs/am65x_hs_evm_a53_defconfig | 2 +- >> configs/dra7xx_evm_defconfig | 2 +- >> configs/dra7xx_hs_evm_defconfig | 2 +- >> configs/dra7xx_hs_evm_usb_defconfig | 2 +- >> configs/j721e_evm_a72_defconfig | 2 +- >> configs/j721e_hs_evm_a72_defconfig | 2 +- >> configs/k2g_evm_defconfig | 2 +- >> configs/xilinx_versal_virt_defconfig | 2 +- >> configs/xilinx_zynqmp_virt_defconfig | 2 +- >> drivers/net/phy/Kconfig | 8 ++ >> drivers/net/phy/Makefile | 3 +- >> drivers/net/phy/dp83867.c | 3 +- >> drivers/net/phy/ti_phy_init.c | 106 +++++++++++++++++++++++++++ >> drivers/net/phy/ti_phy_init.h | 16 ++++ >> 15 files changed, 144 insertions(+), 12 deletions(-) >> create mode 100644 drivers/net/phy/ti_phy_init.c >> create mode 100644 drivers/net/phy/ti_phy_init.h >> >> diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig >> index 542bbd992c53..7051d6c40505 100644 >> --- a/configs/am65x_evm_a53_defconfig >> +++ b/configs/am65x_evm_a53_defconfig >> @@ -101,7 +101,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT >> CONFIG_SPI_FLASH_STMICRO=y >> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set >> CONFIG_SPI_FLASH_MTD=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y > Don't know why this name was chosen but don't you want to label it with TI? > > CONFIG_PHY_TI_DP83867 ? > > Kernel is using different symbol anyway. > CONFIG_DP83867_PHY > ACK.? I will make it CONFIG_PHY_TI_DP83867.? That follows the Kconfig uBoot standard for PHYs > >> CONFIG_PHY_FIXED=y >> CONFIG_DM_ETH=y >> CONFIG_E1000=y >> diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig >> index 9f43cee39611..29da3826f12a 100644 >> --- a/configs/am65x_hs_evm_a53_defconfig >> +++ b/configs/am65x_hs_evm_a53_defconfig >> @@ -103,7 +103,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT >> CONFIG_SPI_FLASH_STMICRO=y >> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set >> CONFIG_SPI_FLASH_MTD=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_PHY_FIXED=y >> CONFIG_DM_ETH=y >> CONFIG_E1000=y >> diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig >> index 4d765da4e052..19c024889155 100644 >> --- a/configs/dra7xx_evm_defconfig >> +++ b/configs/dra7xx_evm_defconfig >> @@ -86,7 +86,7 @@ CONFIG_DM_SPI_FLASH=y >> CONFIG_SF_DEFAULT_MODE=0 >> CONFIG_SF_DEFAULT_SPEED=76800000 >> CONFIG_SPI_FLASH_SPANSION=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_DM_ETH=y >> CONFIG_PHY_GIGE=y >> CONFIG_MII=y >> diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig >> index c25d4ce5c142..e97f1a3ba338 100644 >> --- a/configs/dra7xx_hs_evm_defconfig >> +++ b/configs/dra7xx_hs_evm_defconfig >> @@ -89,7 +89,7 @@ CONFIG_DM_SPI_FLASH=y >> CONFIG_SF_DEFAULT_MODE=0 >> CONFIG_SF_DEFAULT_SPEED=76800000 >> CONFIG_SPI_FLASH_SPANSION=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_DM_ETH=y >> CONFIG_PHY_GIGE=y >> CONFIG_MII=y >> diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig >> index 8e74496b2ccd..46970e31f02e 100644 >> --- a/configs/dra7xx_hs_evm_usb_defconfig >> +++ b/configs/dra7xx_hs_evm_usb_defconfig >> @@ -87,7 +87,7 @@ CONFIG_SF_DEFAULT_MODE=0 >> CONFIG_SF_DEFAULT_SPEED=76800000 >> CONFIG_SPI_FLASH_BAR=y >> CONFIG_SPI_FLASH_SPANSION=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_DM_ETH=y >> CONFIG_PHY_GIGE=y >> CONFIG_MII=y >> diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig >> index e9e82bb4309d..784a6ff396c3 100644 >> --- a/configs/j721e_evm_a72_defconfig >> +++ b/configs/j721e_evm_a72_defconfig >> @@ -124,7 +124,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT >> CONFIG_SPI_FLASH_STMICRO=y >> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set >> CONFIG_SPI_FLASH_MTD=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_PHY_FIXED=y >> CONFIG_DM_ETH=y >> CONFIG_TI_AM65_CPSW_NUSS=y >> diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig >> index a723e2718e5e..dd93a955cefd 100644 >> --- a/configs/j721e_hs_evm_a72_defconfig >> +++ b/configs/j721e_hs_evm_a72_defconfig >> @@ -114,7 +114,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT >> CONFIG_SPI_FLASH_STMICRO=y >> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set >> CONFIG_SPI_FLASH_MTD=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_PHY_FIXED=y >> CONFIG_DM_ETH=y >> CONFIG_TI_AM65_CPSW_NUSS=y >> diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig >> index 5abf5faa450e..f47b1cabe9a8 100644 >> --- a/configs/k2g_evm_defconfig >> +++ b/configs/k2g_evm_defconfig >> @@ -58,7 +58,7 @@ CONFIG_PHYLIB=y >> CONFIG_PHY_MARVELL=y >> CONFIG_PHY_MICREL=y >> CONFIG_PHY_MICREL_KSZ8XXX=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_DM_ETH=y >> CONFIG_MII=y >> CONFIG_DRIVER_TI_KEYSTONE_NET=y >> diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig >> index e8c349261207..eb2a26bc2c7d 100644 >> --- a/configs/xilinx_versal_virt_defconfig >> +++ b/configs/xilinx_versal_virt_defconfig >> @@ -61,7 +61,7 @@ CONFIG_SPI_FLASH_WINBOND=y >> CONFIG_PHY_MARVELL=y >> CONFIG_PHY_NATSEMI=y >> CONFIG_PHY_REALTEK=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_PHY_VITESSE=y >> CONFIG_PHY_FIXED=y >> CONFIG_PHY_GIGE=y >> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig >> index 7b09edd78e1b..5c320f93fe5f 100644 >> --- a/configs/xilinx_zynqmp_virt_defconfig >> +++ b/configs/xilinx_zynqmp_virt_defconfig >> @@ -101,7 +101,7 @@ CONFIG_PHY_MICREL=y >> CONFIG_PHY_MICREL_KSZ90X1=y >> CONFIG_PHY_NATSEMI=y >> CONFIG_PHY_REALTEK=y >> -CONFIG_PHY_TI=y >> +CONFIG_PHY_DP83867=y >> CONFIG_PHY_VITESSE=y >> CONFIG_PHY_XILINX_GMII2RGMII=y >> CONFIG_PHY_FIXED=y >> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig >> index d1f049e62ab7..e366f10afc59 100644 >> --- a/drivers/net/phy/Kconfig >> +++ b/drivers/net/phy/Kconfig >> @@ -244,6 +244,14 @@ config PHY_TERANETICS >> config PHY_TI >> bool "Texas Instruments Ethernet PHYs support" >> >> +config PHY_TI_GENERIC >> + select PHY_TI >> + bool "Texas Instruments Ethernet PHYs support" >> + >> +config PHY_DP83867 >> + select PHY_TI >> + bool "Texas Instruments Ethernet DP83867 PHY support" >> + >> config PHY_VITESSE >> bool "Vitesse Ethernet PHYs support" >> >> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile >> index 1d81516ecd1d..9c6d31718c00 100644 >> --- a/drivers/net/phy/Makefile >> +++ b/drivers/net/phy/Makefile >> @@ -25,7 +25,8 @@ obj-$(CONFIG_PHY_NATSEMI) += natsemi.o >> obj-$(CONFIG_PHY_REALTEK) += realtek.o >> obj-$(CONFIG_PHY_SMSC) += smsc.o >> obj-$(CONFIG_PHY_TERANETICS) += teranetics.o >> -obj-$(CONFIG_PHY_TI) += dp83867.o >> +obj-$(CONFIG_PHY_TI) += ti_phy_init.o >> +obj-$(CONFIG_PHY_DP83867) += dp83867.o >> obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o >> obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o >> obj-$(CONFIG_PHY_VITESSE) += vitesse.o >> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c >> index 50804c130efd..c9ed4a44d4db 100644 >> --- a/drivers/net/phy/dp83867.c >> +++ b/drivers/net/phy/dp83867.c >> @@ -12,6 +12,7 @@ >> #include <dm.h> >> #include <dt-bindings/net/ti-dp83867.h> >> >> +#include "ti_phy_init.h" >> >> /* TI DP83867 */ >> #define DP83867_DEVADDR 0x1f >> @@ -428,7 +429,7 @@ static struct phy_driver DP83867_driver = { >> .shutdown = &genphy_shutdown, >> }; >> >> -int phy_ti_init(void) >> +int phy_dp83867_init(void) >> { >> phy_register(&DP83867_driver); >> return 0; >> diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c >> new file mode 100644 >> index 000000000000..11c4c166b2f5 >> --- /dev/null >> +++ b/drivers/net/phy/ti_phy_init.c >> @@ -0,0 +1,106 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * TI Generic PHY Init to register all TI Ethernet PHYs >> + * >> + * Author: Dan Murphy <dmurphy at ti.com> >> + * >> + * Copyright (C) 2019 Texas Instruments Inc. > 2020? Ack.? I actually started this last year but had to put it aside > >> + */ >> + >> +#include <phy.h> >> + >> +#define DP83822_PHY_ID 0x2000a240 >> +#define DP83825S_PHY_ID 0x2000a140 >> +#define DP83825I_PHY_ID 0x2000a150 >> +#define DP83825CM_PHY_ID 0x2000a160 >> +#define DP83825CS_PHY_ID 0x2000a170 >> +#define DP83826C_PHY_ID 0x2000a130 >> +#define DP83826NC_PHY_ID 0x2000a110 >> + >> +static struct phy_driver dp83822_driver = { >> + .name = "TI DP83822", >> + .uid = DP83822_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +static struct phy_driver dp83825s_driver = { >> + .name = "TI DP83825S", >> + .uid = DP83825S_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +static struct phy_driver dp83825i_driver = { >> + .name = "TI DP83825I", >> + .uid = DP83825I_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +static struct phy_driver dp83825m_driver = { >> + .name = "TI DP83825M", >> + .uid = DP83825CM_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +static struct phy_driver dp83825cs_driver = { >> + .name = "TI DP83825CS", >> + .uid = DP83825CS_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +static struct phy_driver dp83826c_driver = { >> + .name = "TI DP83826C", >> + .uid = DP83826C_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> +static struct phy_driver dp83826nc_driver = { >> + .name = "TI DP83826NC", >> + .uid = DP83826NC_PHY_ID, >> + .mask = 0xfffffff0, >> + .features = PHY_BASIC_FEATURES, >> + .config = &genphy_config_aneg, >> + .startup = &genphy_startup, >> + .shutdown = &genphy_shutdown, >> +}; >> + >> +int phy_ti_init(void) >> +{ >> +#ifdef CONFIG_PHY_DP83867 >> + phy_dp83867_init(); >> +#endif >> + >> +#ifdef CONFIG_PHY_TI_GENERIC >> + phy_register(&dp83822_driver); >> + phy_register(&dp83825s_driver); >> + phy_register(&dp83825i_driver); >> + phy_register(&dp83825m_driver); >> + phy_register(&dp83825cs_driver); >> + phy_register(&dp83826c_driver); >> + phy_register(&dp83826nc_driver); >> +#endif > I would do it in separate patch but up2you. Same reply as above > >> + >> + return 0; >> +} >> diff --git a/drivers/net/phy/ti_phy_init.h b/drivers/net/phy/ti_phy_init.h >> new file mode 100644 >> index 000000000000..309da2aacccb >> --- /dev/null >> +++ b/drivers/net/phy/ti_phy_init.h >> @@ -0,0 +1,16 @@ >> +/* SPDX-License-Identifier: GPL-2.0-or-later */ >> +/* >> + * TI Generic Ethernet PHY >> + * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c >> + * >> + * Author: Dan Murphy <dmurphy at ti.com> >> + * >> + * Copyright (C) 2019 Texas Instruments Inc. > 2020 Same reply as above Dan
On 21/04/2020 14:48, Dan Murphy wrote: > Michal > > On 4/21/20 2:57 AM, Michal Simek wrote: >> On 20. 04. 20 20:53, Dan Murphy wrote: >>> Add a TI Generic init file that will initialize TI PHYs that follow that >>> not require special handling.? These PHYs can connect with the standard >>> MII register set.? This generice file will register the PHY IDs and >>> names of the PHYs so when the command 'mdio list' is executed the PHY >>> name will display as opposed to 'Generic PHY'. >>> >>> The DP8382X PHY series is a generic PHY that requires the generic >>> registration. >>> >>> The DP83867 driver was updated to rename the init to a more PHY specific >>> init call. >>> >>> Signed-off-by: Dan Murphy <dmurphy at ti.com> >> I would personally do it with two patches. > > I was going to do 2 patches but I wanted to show the viability of why this generic file was needed.? Without the DP8382X PHY added it looks like I was just moving things around for the DP83867 and changing names. > > I will break it up in v2 (non-RFC if no one has serious objections to this) > >> >>> --- >>> ? configs/am65x_evm_a53_defconfig????? |?? 2 +- >>> ? configs/am65x_hs_evm_a53_defconfig?? |?? 2 +- >>> ? configs/dra7xx_evm_defconfig???????? |?? 2 +- >>> ? configs/dra7xx_hs_evm_defconfig????? |?? 2 +- >>> ? configs/dra7xx_hs_evm_usb_defconfig? |?? 2 +- >>> ? configs/j721e_evm_a72_defconfig????? |?? 2 +- >>> ? configs/j721e_hs_evm_a72_defconfig?? |?? 2 +- >>> ? configs/k2g_evm_defconfig??????????? |?? 2 +- >>> ? configs/xilinx_versal_virt_defconfig |?? 2 +- >>> ? configs/xilinx_zynqmp_virt_defconfig |?? 2 +- >>> ? drivers/net/phy/Kconfig????????????? |?? 8 ++ >>> ? drivers/net/phy/Makefile???????????? |?? 3 +- >>> ? drivers/net/phy/dp83867.c??????????? |?? 3 +- >>> ? drivers/net/phy/ti_phy_init.c??????? | 106 +++++++++++++++++++++++++++ >>> ? drivers/net/phy/ti_phy_init.h??????? |? 16 ++++ >>> ? 15 files changed, 144 insertions(+), 12 deletions(-) >>> ? create mode 100644 drivers/net/phy/ti_phy_init.c >>> ? create mode 100644 drivers/net/phy/ti_phy_init.h >>> >>> diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig >>> index 542bbd992c53..7051d6c40505 100644 >>> --- a/configs/am65x_evm_a53_defconfig >>> +++ b/configs/am65x_evm_a53_defconfig >>> @@ -101,7 +101,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT >>> ? CONFIG_SPI_FLASH_STMICRO=y >>> ? # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set >>> ? CONFIG_SPI_FLASH_MTD=y >>> -CONFIG_PHY_TI=y >>> +CONFIG_PHY_DP83867=y >> Don't know why this name was chosen but don't you want to label it with TI? >> >> CONFIG_PHY_TI_DP83867 ? >> >> Kernel is using different symbol anyway. >> CONFIG_DP83867_PHY >> > ACK.? I will make it CONFIG_PHY_TI_DP83867.? That follows the Kconfig uBoot standard for PHYs yep. It definitely has to be split Cover?
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index 542bbd992c53..7051d6c40505 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -101,7 +101,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_E1000=y diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig index 9f43cee39611..29da3826f12a 100644 --- a/configs/am65x_hs_evm_a53_defconfig +++ b/configs/am65x_hs_evm_a53_defconfig @@ -103,7 +103,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_E1000=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 4d765da4e052..19c024889155 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -86,7 +86,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index c25d4ce5c142..e97f1a3ba338 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -89,7 +89,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 8e74496b2ccd..46970e31f02e 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -87,7 +87,7 @@ CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index e9e82bb4309d..784a6ff396c3 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -124,7 +124,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_TI_AM65_CPSW_NUSS=y diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig index a723e2718e5e..dd93a955cefd 100644 --- a/configs/j721e_hs_evm_a72_defconfig +++ b/configs/j721e_hs_evm_a72_defconfig @@ -114,7 +114,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_TI_AM65_CPSW_NUSS=y diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 5abf5faa450e..f47b1cabe9a8 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -58,7 +58,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_MARVELL=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_KEYSTONE_NET=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index e8c349261207..eb2a26bc2c7d 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -61,7 +61,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_MARVELL=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_VITESSE=y CONFIG_PHY_FIXED=y CONFIG_PHY_GIGE=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 7b09edd78e1b..5c320f93fe5f 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -101,7 +101,7 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_VITESSE=y CONFIG_PHY_XILINX_GMII2RGMII=y CONFIG_PHY_FIXED=y diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d1f049e62ab7..e366f10afc59 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -244,6 +244,14 @@ config PHY_TERANETICS config PHY_TI bool "Texas Instruments Ethernet PHYs support" +config PHY_TI_GENERIC + select PHY_TI + bool "Texas Instruments Ethernet PHYs support" + +config PHY_DP83867 + select PHY_TI + bool "Texas Instruments Ethernet DP83867 PHY support" + config PHY_VITESSE bool "Vitesse Ethernet PHYs support" diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1d81516ecd1d..9c6d31718c00 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -25,7 +25,8 @@ obj-$(CONFIG_PHY_NATSEMI) += natsemi.o obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.o -obj-$(CONFIG_PHY_TI) += dp83867.o +obj-$(CONFIG_PHY_TI) += ti_phy_init.o +obj-$(CONFIG_PHY_DP83867) += dp83867.o obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o obj-$(CONFIG_PHY_VITESSE) += vitesse.o diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 50804c130efd..c9ed4a44d4db 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -12,6 +12,7 @@ #include <dm.h> #include <dt-bindings/net/ti-dp83867.h> +#include "ti_phy_init.h" /* TI DP83867 */ #define DP83867_DEVADDR 0x1f @@ -428,7 +429,7 @@ static struct phy_driver DP83867_driver = { .shutdown = &genphy_shutdown, }; -int phy_ti_init(void) +int phy_dp83867_init(void) { phy_register(&DP83867_driver); return 0; diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c new file mode 100644 index 000000000000..11c4c166b2f5 --- /dev/null +++ b/drivers/net/phy/ti_phy_init.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI Generic PHY Init to register all TI Ethernet PHYs + * + * Author: Dan Murphy <dmurphy at ti.com> + * + * Copyright (C) 2019 Texas Instruments Inc. + */ + +#include <phy.h> + +#define DP83822_PHY_ID 0x2000a240 +#define DP83825S_PHY_ID 0x2000a140 +#define DP83825I_PHY_ID 0x2000a150 +#define DP83825CM_PHY_ID 0x2000a160 +#define DP83825CS_PHY_ID 0x2000a170 +#define DP83826C_PHY_ID 0x2000a130 +#define DP83826NC_PHY_ID 0x2000a110 + +static struct phy_driver dp83822_driver = { + .name = "TI DP83822", + .uid = DP83822_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825s_driver = { + .name = "TI DP83825S", + .uid = DP83825S_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825i_driver = { + .name = "TI DP83825I", + .uid = DP83825I_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825m_driver = { + .name = "TI DP83825M", + .uid = DP83825CM_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825cs_driver = { + .name = "TI DP83825CS", + .uid = DP83825CS_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83826c_driver = { + .name = "TI DP83826C", + .uid = DP83826C_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; +static struct phy_driver dp83826nc_driver = { + .name = "TI DP83826NC", + .uid = DP83826NC_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_ti_init(void) +{ +#ifdef CONFIG_PHY_DP83867 + phy_dp83867_init(); +#endif + +#ifdef CONFIG_PHY_TI_GENERIC + phy_register(&dp83822_driver); + phy_register(&dp83825s_driver); + phy_register(&dp83825i_driver); + phy_register(&dp83825m_driver); + phy_register(&dp83825cs_driver); + phy_register(&dp83826c_driver); + phy_register(&dp83826nc_driver); +#endif + + return 0; +} diff --git a/drivers/net/phy/ti_phy_init.h b/drivers/net/phy/ti_phy_init.h new file mode 100644 index 000000000000..309da2aacccb --- /dev/null +++ b/drivers/net/phy/ti_phy_init.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * TI Generic Ethernet PHY + * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c + * + * Author: Dan Murphy <dmurphy at ti.com> + * + * Copyright (C) 2019 Texas Instruments Inc. + */ + +#ifndef _TI_GEN_PHY_H +#define _TI_GEN_PHY_H + +int phy_dp83867_init(void); + +#endif /* _TI_GEN_PHY_H */
Add a TI Generic init file that will initialize TI PHYs that follow that not require special handling. These PHYs can connect with the standard MII register set. This generice file will register the PHY IDs and names of the PHYs so when the command 'mdio list' is executed the PHY name will display as opposed to 'Generic PHY'. The DP8382X PHY series is a generic PHY that requires the generic registration. The DP83867 driver was updated to rename the init to a more PHY specific init call. Signed-off-by: Dan Murphy <dmurphy at ti.com> --- configs/am65x_evm_a53_defconfig | 2 +- configs/am65x_hs_evm_a53_defconfig | 2 +- configs/dra7xx_evm_defconfig | 2 +- configs/dra7xx_hs_evm_defconfig | 2 +- configs/dra7xx_hs_evm_usb_defconfig | 2 +- configs/j721e_evm_a72_defconfig | 2 +- configs/j721e_hs_evm_a72_defconfig | 2 +- configs/k2g_evm_defconfig | 2 +- configs/xilinx_versal_virt_defconfig | 2 +- configs/xilinx_zynqmp_virt_defconfig | 2 +- drivers/net/phy/Kconfig | 8 ++ drivers/net/phy/Makefile | 3 +- drivers/net/phy/dp83867.c | 3 +- drivers/net/phy/ti_phy_init.c | 106 +++++++++++++++++++++++++++ drivers/net/phy/ti_phy_init.h | 16 ++++ 15 files changed, 144 insertions(+), 12 deletions(-) create mode 100644 drivers/net/phy/ti_phy_init.c create mode 100644 drivers/net/phy/ti_phy_init.h